In most cases it is not necessary to set up port-forwardings on your router or multi-PC modem when you connect the VoiceFinder. If you notice that after connecting it you can not receive calls or if there are problems with receiving sound, then we advice you to set port 2 forward on your router / multi-PC modem. Before you set the port forwarding on your router you should first set up your VoiceFinder to type 4 (fixed IP).

The maximum connecting factor for analog equipment is 2. This means that when the total connecting factor is higher than 2 (number of connected devices added), some of the devices will not ring when a call comes in. However, it is possible to connect an analog telephone central to the VoiceFinder, and then you will be able to connect several telephone devices to the central. In all cases, you will dispose of one telephone line only. See similar questions...

Yes, if you are using a router (NAT) you can connect the VoiceFinder without problems to one of the LAN ports of your router. See similar questions...

Within the VoiceFinder there is a DHCP server. The server shares with your PC or router the IP-address based on DHCP. See similar questions...

If you have questions regarding the compatibility of your router with your new VoIP service you should contact the router manufacturer directly. Some of the most common manufacturers' tech support numbers and web sites are listed below. If you do not see your router manufacturer's information listed above, please refer to their website for further information. Most likely the VoIP device you received is not registered with PhoneOverNet. See similar questions...

The best thing to do is visit the software manufacturer's website and look for information about NAT router or firewalls. See similar questions...

This is becoming more of a common problem because a lot of computers are now coming out with just USB connections. The way around this is to either purchase a USB to Serial port converter, or contact the manufacturer of the product to see if they have a USB connection for the instrument. See similar questions...

In principle the ports used for the streams could differ for each of the streams. Also, in case the streaming provider is changed, the port numbers might change as well. See similar questions...

The USB and serial ports may be physically connected at the same time; however, the logger will talk to only one external host at a time. See similar questions...

The standard port for usenet is 119. However, sometimes you may point your news-reader to any of the following ports: 23, 25, 80 and 119. See similar questions...

Please follow the instructions on the quick-start guide in the routers box. The quick start for Vigor 2500 is reproduced below, but the procedure is the same for all Vigor 2500 and Vigor 2600 series routers. Click on the image to see it larger. This is really three questions ... firstly can the drayTek routers connect several computers to the internet .. See similar questions...

The Ethernet card on your PC connects to the DSL router via a 10BaseT Ethernet cable using RJ-45 connectors. The AT&T technician will bring a laptop PC to test the customers' DSL access and the customers' DSL router/modem. Due to liability issues, AT&T cannot assist with configuration or testing of the customers' personal computer or LAN with the DSL service. See similar questions...

Obtain a USB hub that has several USB ports (available at electronics stores). Use the hub to connect the other USB devices. Now connect your Companion 5 speaker system to a USB port on the computer. You need to use the USB connection to provide audio processing for 5.1 digital sources, but you can also connect the audio output jack on your computer to the input on your Companion 5 control pod, using a 1/8-inch-stereo-male-to-1/8-inch-stereo-male audio cable. See similar questions...

It is possible to utilize a GPS device with Wave Relay™. And Wave Relay™ can be used to provide mobile tracking. If you have a specific tracking requirement or wish to utilize a GPS system with Wave Relay™, please contact us for more information. See similar questions...

The latest versions of iVisit will work with many NAT/proxy/Firewall devices. Unfortunately, there are dozens of such devices, and each one seems to operate a little bit differently. Some will support iVisit out of the box; others may require special configuration; others may not work regardless of what you do. Others may only work partially, e.g. See similar questions...

First the router needs to be upgraded to the latest firmware level. The manufacture web site will contain this information as well as information on how to install the firmware. The computers need to be running the latest version of SecuRemote. That version is SecuRemote NG AI. It can be downloaded from the ASU Security web site. See similar questions...

Yes. Routers and switches will enable you to connect more than one computer to ResNet (up to 8) at the same time. Switches will require a special crossover Ethernet cable (comes with most routers). See similar questions...

Click Here to preview them. Should you not see the port you are looking for please let us know by sending us a comment. Here is a step by step instruction sheet for the Linksys DSL router. See similar questions...

A - Here is a list of the ports necessary to be opened for both inbound and outbound traffic thru your router or firewall. More help is available on our member message boards inside the web site. Our FSHost Services using the standard Flight Simulator Multiplayer require these ports to be open in your firewall or forwarded in your router. TOP See similar questions...