Can I read/write PAL video on an NTSC camera, or the opposite, via firewire? Johnson Ching reports that you can freely read and write PAL or NTSC tapes on either a TRV900 (NTSC) or TRV900e (PAL) camera through the firewire. Here is a letter from Jerome Maro explaining the situation: What I understand about how those cameras are working is the following (tested with a PAL TRV900 and also a PC-1 (also PC-100, tnks James)). If you have a DV cassette recorded at 25 p/s (from a PAL camcorder..

Different countries use different methods of recording and playback. Please go to Video Standards for a complete explanation of this. See similar questions...

There are two basic formats of television signal. In the UK and Europe (and Japan) the standard is called 'PAL', yet in America the standard format is 'NTSC'. DVD discs can be encoded in either of these two formats, and this should not be confused with Region Coding as this is something completely different. In almost all cases, NTSC discs can be played within the UK and Europe without any problems. See similar questions...

These are two different TV picture standards. Region 2 (Europe) uses the PAL standard whereas region 1 (USA and Canada) uses the NTSC standard. These standards are incompatible with one another and to be able to view a region 1 DVD on a UK TV, you'll need to have an NTSC compatible or multi-standard TV. See similar questions...

PAL and NTSC are the television standards for different parts of the world. There is also a third - SECAM. NTSC covers the United States, Canada, Japan, and a few other places. SECAM covers France and Russia. PAL covers the rest of the world. PAL, SECAM, & NTSC are basically a different way of displaying the picture on the television. The main differences are in the number of horizontal lines displayed on the screen, and the number of frames per second displayed. See similar questions...

There are playback modes such as single-frame, Index (you can select the number of frames to display on the monitor from 4, 9 or 16 frames), Close-up (2x through 10x magnification), Slideshow (display the stored images one after another in succession) or playback images by rotating. You can operate camera control functions in the OLYMPUS Studio 1.2 software program except when using Continuous AF or when selecting Sport in the shooting mode, which uses Continuous AF. See similar questions...

This question is particularly important when buying VHS tapes. If you live in North America or Japan, your VCR is (most likely) set up to only play NTSC VHS tapes. If you live in Europe or Australia, your VCR is (most likely) set up to only play PAL VHS tapes. There is also another Region Code Called SECAM that is used in parts of Africa and Russia, but these are not carried by Freedom Footbags. See similar questions...

NTSC and PAL are two different video standards used by countries around the World, and the two standards reflect how many horizontal lines run across a TV set to comprise the video picture. A VHS tape, DVD, or TV is either NTSC or PAL. The United States, Canada, and Japan use NTSC. Britain and many European countries use PAL. Unfortunately, the two are not interchangeable. So for example, if you got a PAL tape from your cousin in England, it would not work on your VCR and TV. See similar questions...

PAL:- Is a format widely used in Europe, Australia, Asia and Africa. PAL stands for Phase Alternation Lines and has various sub-systems for VHF and UHF bands for each country. SECAM:- Is mainly used in Eastern Europe and France (SECAM-L) SECAM stands for System Electronique Couleur Avec Memoire was founded by Frenchs. NTSC stands for the National Television Systems Committee who developed the system and public broadcasting of NTSC began in the United States in 1954. See similar questions...

It depends, where you are going to use you camcorder. If you are planning to move or work overseas, buying a PAL camcorder would be the best solution. PAL camcorders are compatibile with most TVs and VCRs overseas that also operate on PAL system. If you are planning to work within U.S., getting NTSC camcorder is better choice for you, due to the broadcast standard used in United States - NTSC. When purchasing a camcorder, you have to remember that since U.S. See similar questions...

We normally produce PAL DVDs, as they are both the Australian and International standard, and produce the highest quality output (625 lines of resolution instead of 525). However, these will not work in the USA or Canada. We can also produce NTSC DVDs for the USA and Canada upon request. See similar questions...

We can do either. If you wish for your DVD to play in PAL TV's, the Authoring process and format must be in PAL in order to play on the PAL formatted Televisions/players. See similar questions...

NTSC is the North American standard format for videos. North America includes both Canada and the USA. PAL is the standard format in Europe for videos. Most European machines can play both NTSC and PAL formats now. You will have to check with your area to find out what format you require. Our DVD's are only available in NTSC but most current machines will play both versions. You'll have to check your specific DVD player to be sure. See similar questions...

The video tape we use is the VHS type. It comes in three colours system formats PAL, NTSC and SECAM. PAL has only 25 frames/sec and high definition frames. NTSC has 30 frames/sec but slightly less definition on each frame. See similar questions...

NTSC (National Television Standards Committee) is a standard used in North America and Japan. It has the ability to display up to 525 lines of resolution. PAL (Phase Alternating Line), a standard used almost everywhere else in the world, has the ability to display 625 lines of resolution. SECAM (Sequential Color Memory) is used sparingly around the world and can be found in France, parts of Greece, Eastern Europe, Russia, Africa and a few other parts of the world. See similar questions...

From a hardware point of view there is. A consumer CD-i player is localized for a specific broadcast system. The output signal of the video connectors is according to this local system. You can tell which broadcast system is used by looking at the version indication after the normal type ID (refer to What does the /00, /20, etc. after the type-indication mean?). See similar questions...