The light does not come on when the card reader is plugged into the computer. It will only come on when a memory card is inserted into the reader.

Yes, the OneTouch USB Cable can be used with a hub, rather than connected directly into a port on the computer. With the 9-pin serial cable, just plug it into your meter and the serial port (COM port) of your computer. You may need to restart your computer if another device had been using the serial port. With the OneTouch USB Cable, you must install a software driver before using it for the first time.

No, the USB port will support only one user. If you need to support multiple computers you need to use the Ethernet port and a hub/switch.

A USB hub typically consists of a single upstream port (designed to connect directly to your computer or to another hub) and multiple downstream ports. D-Link provides both 4-port (DSB-H4) and 7-port (DSB-7) models. It allows you to expand the number of devices you can attach to your computer.

Yes, as long as the hub uses an external power supply. We do not recommend or support this configuration. Before requesting help from Technical Support, please try connecting the device directly to the computer's USB port.

Yes- The phone should work properly when plugged into a USB hub. If experiencing problems with a vPhone using a USB hub, plug the vPhone directly into the computers USB port.

The maximum length for a USB cable is 5 meters (197 inches). The power transferred through a USB cable that is greater than 5 meters in length will start to decrease, and the device may not function properly.

I've connected the USB to Serial adapter but it's on Com Port 5 (or higher) and your software only has Ports 1-4. This issue applies to the c\temp software only. This has been resolved with the new version of the MDAS-Pro software. If you do not have a copy of this software, please contact us.

A USB cable may be used with a USB-to-Serial (9-pin) conversion cable. For Window? 98, NT, 2000 & ME these conversion cables usually require that an software program (included with the cable) be installed on the PC in order for the computer to recognize the cable. Window? XP (or higher) usually does not require the cable software.

The USB cable (I-USB7) provided with the Optio43WR is also compatible with other Pentax Optiocameras such as the Optio550, Optio555, OptioS, OptioS4 OptioS4i and Optio40.

The CDU550 is provided with a system whereby by connecting both USB ends, the modem receives more power thereby extending its signal strength slightly. This is only really necessary in fringe coverage areas. Please see the manual for a complete guide to connecting your CDU550.

The V3C/V3M/Krzr/Maxx Ve/Slvr L7C Uses "standard" 5-pin USB A to Mini-B as used by many digital cameras, PlayStation Portable, portable Mp3 players, portable external hard drives, Blackberries, etc... Local Availability at Radio Shack and Best Buy, Circuit City, Cingular stores and probably others... Note: Walmart is said to have a PSP cable which will work for $5. See also -> Cheapest places to get the RAZR USB cable? Newegg.com sells a Kit of MPT v4.

It can fit inside your laptop memory card slot (PCMCIA) or inside your smallest pocket, tucked in its leather cover.

M bps runs at Cat. 5 twisted-pair cable will cause some cross-talk signal. If the 3rd and 6th wire of RJ-45 connector are not belong at the same twisted pair. That will cause problem with longer distance as above 40 meters. User should check the wiring before install the 100Mbps network.

Halleck Undergraduate Bistro, also known as The HUB, is located adjacent to the Cafeteria in Halleck Student Center. The HUB offers students a relaxing atmosphere in which they can enjoy a variety of sandwiches, salads, beverages, snacks, "Sub Connection" subs, "Freshens" frozen fruit smoothies and ice creams, and "Pretzel Logic" gourmet soft pretzels.

Good question. According to the USB spec, software is required to connect not only to first tier devices, but also to any plugged into USB hubs. It appears that there is a bug in the Kodak Mounter and USB connection software causing it to fail unless the camera is "device #0", connected directly to the computer.

A USB hub has to re-calculate the time left before the next sof (end of the uframe); the small extra delay added by the hardware hub could make the transaction not handled as fast as a device directly connected to the host. If several devices are connected on the hub and working in parallel (for example, a webcam + a USB flash drive + a mouse), then the USB bandwidth is shared among the devices usage.

All webcams need to be plugged into a powered USB hub. If your USB hub is unpowered, you will not be able to run your webcam through it. You can also plug your webcam directly into a USB port on your computer. That'll work just dandy. Even though you have a secret code on your video, when somebody clicks on your broadcast name from the Channel Menu in the viewers, it will still show that your broadcast name has been clicked on.