The wireless modem connects to your computer via an Ethernet Port. The Ethernet port is located at the back of your computer If you do not have an ethernet port there are other options. Call you nearest reseller.

The unit will shut itself off after 10 minutes or you can hold both buttons, on the front , down to turn it off.

Cygwin/X, in conjunction with Cygwin, provides a complete compatibility layer for compiling and running UNIX applications on Microsoft Windows.

Yes, you will have to register twice: once for the wired Ethernet connection and once for the wireless connection.

External adaptors are available for both desktop and laptop computers which connect to either a USB port or PCMCIA card slot.

The WLA660's Ethernet port (RJ-45 jack) supports 10 Mbps over a 10Base-T connection (half-duplex only).

You have several options. You can purchase a Network Interface Card (NIC) at any computer supply store. This will require a physical installation of the card into your computer. Or you can purchase a USB-Ethernet adaptor which converts a USB port on your computer into an Ethernet port. We have USB-Ethernet adaptors in stock for purchase and delivery with your modem.

Either one will work with the cable modem and service Wave provides. However, not all computer systems allow for a USB installation. Before your Internet installation, you must have a computer with a USB port, or have a 10 Base T Ethernet card installed in your computer.

Linking a program causes the following error on Linux: /usr/bin/ld: cannot open -lgmp: No such file or directory

For the SU to work at your new location, you need to send me the SU# (on tape on the back) and where you will be moving to (Dodge North, South, Freedom) so that I can make changes at the access point for the SU to work in your new location. No change is needed if you are staying in the same village. SU's only work in DS, DN, and Freedom Village!

If you intend on storing your unit I would recommend a dry well ventilated space if being stored over winter the unit is kept in a centrally heated room. Under no circumstances must it be stored where it will be subjected to moisture.

No, the UV system should be left on whether you are using the water or not. The lamps age regardless of the amount of the water drawn through the system. By leaving the unit on, you will eliminate the potential problem of having contamination pass through the system while the unit is off.

In general, you should only specify management capabilities that can be implemented in most years on the units (e.g., 8 years out of 10). However, there are several circumstances under which the drawdown and flooding capabilities of a unit might be described differently than what is physically possible. Some examples include: A unit can physically be dewatered at anytime during the spring or summer but in actual practice must be drawn down before late spring because it is a Natural Area.

If you are using the EP301 product, you need to read back the bit 7 (BUSY# of LPT port) of I/O address 379H How can i reload the OS on this unit. There is currently Linux loaded and I want to change to Windows. Please contact TME Technical Support for help. We will need more information than what was provided to answer your question. No, our boards are designed to be integrated into systems which are then subjected to FCC testing & approval

A. The Targus USB Mobile Port Replicator with Ethernet is the world’s smallest expansion hub that provides instant peripheral device attachment and Ethernet via a single USB connection to Windows 98/ME/2000 based computers. Packaged in a small and attractive enclosure, the PA090U can fit any place on a desktop space. Add devices like mice, keyboards, joysticks, network, printers, PDAs, scanners, speakers, cameras, telephones and many more without rebooting your computer.

Please note: It is usually a bad idea to force the speed of an interface. If possible, leave in Auto-negotiate mode. Contact support@candelatech.com if you have questions. LANforge supports setting the ethernet port speeds through the GUI and CLI. The CLI Scripts page offers the lf_verify.pl script that has an example of setting the port speeds through the CLI. Information on how to set it through the GUI can be found in this section of the LANforge GUI Users Guide.

Unfortunately, this switch is defective. Please go replace you switch ASAP with your Vendor. If you have this switch over 30 days, then please E-mail rma@gigafast.com for future instructions.

Some DSL modems carry USB capability. This is useful alternative in instances where a network card cannot be installed. Please note that you cannot use the USB port of a usb HUB to extend the wire length between your modem and PC, or share the access to multiple systems. You can use the USB and Ethernet ports at the same time to facilitate access on two machines provided the advanced modem routing features are enabled.