No. Well, that's not entirely true. If you would like to sit within 12 inches of your device you would be able to remote control devices assuming you had the proper software. The problem is that the UX50 does not include a high power infrared transmitter that can be used to control home theatre systems, etc. so even if you found software compatible with the UX50 you would not be able to control anything from more than a foot or two away.

You'll find the instructions in the 'Help' screens in the V+ menus. If you have a black remote, you can reset it to control your V+ volume by using code 0683.

All selection and level is done either on the front panel or at the remote; never both locations. Connecting just a VR 1 to the CP 64 or 52 remote control terminals will allow level adjustment. However without a source selector the unit will default to source one. If the PRIORITY / L4 INPUT automatic switching is enabled, then the unit will select the L4 signal when present and L1 at any other time.

The gain of each Jove receiver is probably a bit different depending upon how precisely it is tuned up. Usually the receiver volume control should be set between the 12 o'clock and 3 o'clock position. Low volume settings give the receiver more .dynamic range. than high settings. A large dynamic range is desirable for strong bursts. Since solar bursts can be stronger than Jupiter, use the lower gain setting for solar observations. The 12 o.clock setting may also work fine for Jupiter.

There are actually two boxes for the radio frequency system (note that on Model 9600, all remote components are concealed within the head rail): 1. receiver - 4.75”x3.5”x1.5” 2. relay - 3.25”x2”x1.5”. For the infrared remote, the single receiver enclosure measures 4.5”x2.5”x1.25”.

Most TVs will turn on or off within a few seconds. But it may take up to 69 seconds for your TV-B-Gone® to reach the POWER code for your TV in its extensive database. We organized the codes to put the most popular ones first. Yes. Your TV-B-Gone® remote control will turn your TV on or off, also if you are playing a video or DVD. TV-B-Gone® remotes will work on all types of remotely controllable TVs, no matter what type of screen they use.

Press the hard button on the Navigation system that resembles a musical note. A screen will appear that allows you to adjust the audio output of the system. One of the options within this screen is ?Volumes?. Pressing this button will take you to a screen in which you can adjust the Nav system's volume, including muting the voice guidance entirely. Additionally, the NAV system volume can be adjusted any time the system is speaking by adjusting the volume with the regular volume knob.

In most cases, you do not need an additional volume control. The volume can be controlled by the primary audio player.

If the outlet was not connected to a receiver and TV when the DISH Network system was installed, it is most likely not connected to the satellite dish. The additional cable outlet may be added to the system, service call fees may apply. Contact your DISH Network satellite installer for more information.

Most TV’s, especially LCD, DLP, or plasma, now have variable audio outputs that work really well with Audioengine speakers. Just connect the left and right audio out RCA jacks from your TV to the 3.5mm mini-jack input on the left speaker rear panel (we’ve included an RCA to 3.5mm “Y” cable). Set the volume knob on the left speaker front panel and then use your TV remote to control the Audioengine volume.

If the manufacturer of the receiver provides a means to control the volume, we provide that capability with the SWL IR Remote. Currently the only receivers that permit volume control with the SWL IR Remote are the ICOM R75 and the Japan Radio NRD-545. Some scanner receivers can only be muted with the SWL IR Remote.

The Sky remote control can work the basic functions of most (95 percent) of the TV sets in the UK. Simply enter the 4 digit code given for your model in the User Instructions. The handset will remember this for the life of the battery and also for up to five minutes during battery swapping. The Sky remote control was designed to work with most TV sets. If it cannot carry out the basic control functions (volume control, channel change, Teletext access etc.

No. Because TV-B-Gone® remotes work by infra-red (IR) light, it won't go through walls, ceilings, people, or other objects.

Sometimes. Even though glass is transparent to visible light, not all glass is transparent to infra-red (IR) invisible light. TV-B-Gone®, like other remote controls, uses IR light, and so, it will go through some glass, and not others. Try it and see...

Yes! All TV-B-Gone® remote controls come with batteries installed. These batteries are small, light weight coin-cells (so don't look for heavy triple-A batteries).

For most people, the batteries in your TV-B-Gone® remote will last from 3 months to a year (though, of course, the more you use it, the quicker the batteries will need to be replaced).

From our reserach we found we could put in two 2032 batteries instead (one in the B1 position and one in the B2 position), which are bigger, longer lasting and almost the same price. So we will be putting these in the new models and recommend it when replacing the batteries in all TV-B-Gone models.

Please press the BUY NOW button above to order your very own. You can also look on our home page to see if it is stocked in a store near you.