You just have to press the "SETUP" key on remote control. Then just watch the top menu bar (right part).

The firmware version can be obtained on the Information - System page. It is listed as "S/W version".

What is the Shift Key Bug (HEU)? It is a bug that occurs on 100LX ROM versions 1.02a or less. Occasionally, the key that is pressed after the shift key is ignored and the next key pressed is capitalized. If you try to write "Shift Key Bug" it becomes "Hift Ey Ug". This problem is intermittent and not all users observe it. What information is encoded in the serial number? The week it was manufactured.

To determine what version of RADIUS is currently installed on your machine click the "Help" item on the menu bar and select "About." You will presented with a screen indicating the version of RADIUS you are using.

Absolutely. TRACERS is Barium Sulfate which is the most common bone cement opacifier on the market now in a variety of prepackaged cement formulations. TRACERS contains 5 g of Barium Sulfate which we have designed to be used with a cement containing 12 g of powder, resulting in a level of opacification of 30%. It is not recommended to add TRACERS to a cement which already contains opacification.

Launch Acrobat Reader, select "Help" menu option, and select "About Acrobat Reader." If you are using version 5.0.5 or higher, you do not need to upgrade. If you are using version 4 or below, please visit Adobe's website at http://www.adobe.com/products/acrobat/readstep2.html to download a free upgrade to the latest version of Acrobat Reader.

If the computer is running, use the command uname -R. This will give you the full version number. You can also determine the IRIX version when you turn on the computer: look sharp, and you should see the version number appear as part of the scrolling boot messages.

The controller's properties information displays the firmware version that is installed on the controller. From the Storage tree view object, you can display the firmware version for all controllers attached to the system. (A controller's Information/Configuration subtab also displays the firmware installed on that controller.) Click the Information/Configuration subtab.

The latest software for the PORTADISC MDP 500 is version 1.50. The version is shown briefly after power up on the MDP’s boot-up page. If your MDP contains a version other than v1.50, contact your dealer for instructions on getting your MDP updated to the current release.

Most writing software has an option for showing CD recorder information, which will include the firmware version. Check the firmware version using your writing software, which will have an option for CD recorder information, including the firmware version. Or you can also check it using the RFlash/Firmware Flash Utility program for uploading the firmware.

If you want to know the current version installed on the player you have to do the following operations: All the internal version numbers are now displayed on TV (and the one corresponding to the version is the 4th one).

The firmware version can be found on the USB Serial Ports Advanced Options tab of the device manager.

Login the router, click "Status" at the top corner, then check "Runtime Code Version". The runtime code version is the firmware version.

Please take out the battery and find a serial No. in the Clip, LXXXXXXXX, and please send us a email (service@fortuna.com.tw) for us to check if your Clip-on is with 2.02 firmware version. If your Clip-on is not the Xtrac 2.02 version and you want to upgrade your firmware, we let our dealers deal with the firmware upgrade for our Clip-on GPS receiver, so please contact your dealer to upgrade the latest firmware version.

Please note you have to use Fortuna made USB cable to update the firmware and when you use the cable, it is better to take out the batteries. Please find the firmware upgrade instruction from the GPSmart download page.

Unless you have hardware affected by a fix (esp. specific 256MB Sandisk cards on Meridan) or you have DirectRoute, my personal advice is to remain on the lowest number above 4.06 that works with your hardware and mapping programs. Some folks on the list are happy with the newer versions, so it's up to you to decide.

If you are not running the current version 1.04.6008 then you must upgrade prior to registration. The registration process will prevent registration until upgrades have been performed. If the upgrade failed due to you not being connected to the Internet try running the software as a Demo and Upgrade from inside the software. Start Music Book Deluxe without keying in the serial number and checking the run as demo check box. Once the program has opened go to Maintenance > Settings > Flash Upgrade.

With an up to date perl installation one may query the local perl setup and all extensions via the command: perldoc perllocal For the Tk extension: version numbering has changed recently and determining the version of Perl/Tk that you are running now depends on what version you are running: Tk-b10 (and higher) has changed to $Tk::VERSION (rather than the older "$Tk:Version") to be consistent with other packages.