Definitely and efficiently. Dealers can perform a simple conversion at the time of installation so that your Blaze King can use propane gas. Propane gas is packed full of energy and is an excellent, safe way to heat your home.

Over time, deposits can form on the glass of any gas appliance. These deposits are the result of combustion and should be removed from the glass by using an approved glass cleaner. Do not use household glass cleaner as the residue from the ingredients can ruin your glass. There are several suitable products on the market and are available through professional hearth products retailers.

Many propane appliances can be easily converted at a low cost. Consult your contractor about converting your propane appliances to natural gas.

Since Blaze King gas appliances are designed to run without electricity, they are millivolts systems. When the pilot is lit, the flame makes contact with the thermocouple or thermopile, creating less than ? of a volt of electricity. This current is designed to keep the valve open and allow gas to continue to flow. When the pilot goes out, the current ceases and the valve shuts down.

There are hundreds of dealers throughout the United States, Canada and Japan. If you do not find a dealer near you posted on this site, please contact us as we are always adding to our family of great retailers.

According to the U.S. Department of Energy, it could cost up to twice as much to operate your range, water heater, dryer or furnace with electricity than with propane gas. Propane gas furnaces and heaters provide more consistent warm air throughout your home at a lower cost than electric heat pumps and have a longer average life span of 20 years, compared with electric heat pumps' 12-year average life span.

The FlameSaver Tank can be used with other propane gas appliances. Please contact the appliance manufacturer to find out how the FlameSaver Tank will operate with their appliance. Most likely it will. Depending on which direction the tank leans and how far it leans could cause the tank to shut off sooner or later than expected. FlameSaver was designed for use in a fully upright position.

The easiest way is to visit with your local Blaze King dealer. You can also download a brochure from this web site and print it in the convenience of your home. Or, send us an email and we'll put one in the mail to you today! Be certain to include your complete mailing address and mention which type of Blaze King you are most interested in.

Natural and propane gas continue to be the best value for your energy dollar. Compared to electricity, natural or propane gas appliances can cost less than half as much to operate. As a gas customer you'll enjoy savings up to almost 50% on your heating, water heating, clothes drying and cooking costs! More importantly gas is a safe, reliable, and environmentally-friendly energy source. Back to Top

Night and Day! Blaze King classic models feature a bimetal coil thermostat This simple thermostat evens out the uneven nature of burning wood. Blaze King owners typically only adjust their thermostats once or twice and day. Nearly all other wood stoves have a damper to regulate air-flow and require more frequent adjusting. Also, Blaze King wood stoves are very deep. Not just front to back but real depth.

You need to determine which model of Blaze King you own first. Since there have been dozens of models made over the years, determining which model you own by general description is usually not possible. At the time all stove are manufactured, a metal or foil decal is applied to the rear of the stove. (Right hand side on inserts). This label contains all the information pertaining to the model and serial number.

Yes, all Blaze King wood stoves are mobile home approved. Of course this requires that side shields, rear shield or fans, fresh air kit and double wall stove pipe are used in the installation. Unfortunately, Blaze King wood inserts are not mobile home approved, as there is no design for a fresh air intake for these models.

With the exception of the outdoorsman model which can run from a 20 lb tank, the indoor gas heaters require a 100 lb because of the speed at which the gas flows to the heater. The faster the propane flow the colder the propane gets (experience this by blowing air gently from your mouth to your hands, then blow some air as hard as you can into your hands - the faster moving air is colder than the slower moving air).

The NPGA has developed a comprehensive maintenance program called GAS Check? (Gas Appliance System Check), in which trained technicians inspect propane systems and appliances in homes to ensure they are running safely and efficiently. The program also educates homeowners on the proper maintenance of propane appliances and how to handle propane safely.

Natural gas can be connected to your home within a 4 to 6 week timeframe depending on the time it takes for the permit to be issued and the completion of the required paperwork. Propane gas can be connected within a 2-week timeframe. Back to Top Yes, Clearwater Gas is a full service gas energy company. In addition to providing economical natural and propane gas, we sell all types of energy efficient gas appliances.

Any gas appliance that you own and provide for the tenant's use is included in your legal duties. If a tenant has their own gas appliance that you have not provided, then you have responsibilities for parts of the associated installation and pipe work but not for the actual appliance.

Yes, gas service is very competitive. A family of four consumes an average of 465 therms per year totaling approximately $856.00 per year. The equivalent amount of electricity for a family of four would cost approximately $1,628.00 per year. Compared to electricity, natural and propane gas are relatively cheaper than electric energy for typical applications. Back to Top

No, you may contact any licensed plumbing contractor. The best source for locating a plumbing contractor is via the Yellow Pages. Back to Top Yes, we have a complete Installation and Service department to install and maintain residential and commercial gas piping and appliances. For expert installation, maintenance and repair services call the Clearwater Gas Service and Repair at 727-562-4900, ext. 7419. Back to Top

DO NOT UNDER ANY CIRCUMSTANCES try to modify or repair valves, regulators, connectors, controls, or other appliance and cylinder/tank parts. Doing so creates the risk of a gas leak. CALL AN EXPERT. If you are unable to operate any part of your propane system, or if you think an appliance or other device is not operating properly, call your propane retailer or a qualified service technician. They can inspect, adjust, repair, or replace any part of your propane system.

It is illegal for anyone to use a gas appliance if they suspect it is unsafe. Turn the appliance off and do not touch it until it has been checked by a CORGI-registered installer. Free leaflets explaining some of the main requirements of landlords, under the Gas Safety (Installation and Use) Regulations 1998 and general gas safety information are available from HSE.