Good question. According to the USB spec, software is required to connect not only to first tier devices, but also to any plugged into USB hubs. It appears that there is a bug in the Kodak Mounter and USB connection software causing it to fail unless the camera is "device #0", connected directly to the computer.

Yes, the CB-USB4 cable that comes packaged with the camera, is required for downloading images using the camera. The stock number for a replacement cable is (Item #200776). It can be purchased through the Olympus Emporium or by phone at 1-800-201-7766.

Yes, the OneTouch USB Cable can be used with a hub, rather than connected directly into a port on the computer. With the 9-pin serial cable, just plug it into your meter and the serial port (COM port) of your computer. You may need to restart your computer if another device had been using the serial port. With the OneTouch USB Cable, you must install a software driver before using it for the first time.

When Quickview installs it creates a directory in the following location: C:\Program Files\FLIR Systems\Device drivers. All the drivers required for USB and Firewire cameras are in this location. They can also be found on the Quickview CD.

No, the USB port will support only one user. If you need to support multiple computers you need to use the Ethernet port and a hub/switch.

A USB hub typically consists of a single upstream port (designed to connect directly to your computer or to another hub) and multiple downstream ports. D-Link provides both 4-port (DSB-H4) and 7-port (DSB-7) models. It allows you to expand the number of devices you can attach to your computer.

The drivers for your device are not installed correctly. Please, follow the documentation, that came with your device to setup the software drivers. Generally: if no other piece of software (including the one, that came with the device) can connect to the video device, @ctiVideo will not connect either. Your video device is not compatible with Video for Windows. See the previous question and consult the documentation of your device to check if it is designed to work w/ VfW.

No. The Hitch will recognize the hub connect to the first device it finds on the USB hub. If that device is unplugged from the hub, the Hitch will then search for another device connected to that hub, but will never connect to more than two devices at once. No. The Hitch is a bridge device, and contains no memory. This is an advantage because it cannot have any issues with storage, such as hard-disk failures or memory allocation errors. No.

Yes, the CB-USB4 cable that comes packaged with the camera is required to connect the camera to the computer. The stock number for a replacement cable is 200 776. It can be purchased through the Olympus Emporium or 1-800-201-7766.

Yes, as long as the hub uses an external power supply. We do not recommend or support this configuration. Before requesting help from Technical Support, please try connecting the device directly to the computer's USB port.

A hub and switch are two devices that split the bandwidth coming from any ethernet device that is connected to them they will not route communications from your LAN to the internet. All they do is split the bandwidth so your modem can see all of the MAC addresses connected to it so it will only give a connection to one of those devices.

Yes, you can connect the player directly to your computer using an Ethernet crossover cable. You can purchase a crossover cable at most retail computer stores. Once you have this connection, you'll need to set up your network adaptor and Squeezebox with static IP addresses so that they can find each other.

A hub is a network device that extends the network so that you could connect more than one computer to the network jack. A network hub can be borrowed from the ITS department. Verify if your hub has a button called Normal/uplink near the rightmost end. It is not necessary that your hub should have the Normal/uplink button. If you see the button, make sure you press the button inwards to set it to uplink.

Yes- The phone should work properly when plugged into a USB hub. If experiencing problems with a vPhone using a USB hub, plug the vPhone directly into the computers USB port.

This is probably a java client issue. You will need to make sure you have the latest java plug-in updates. NOTE: A lot of XP disks do not enable or install java by default. Some dispute between Sun and Microsoft. By installing the latest service packs and java upgrades you should be fine. You will also need to make sure you have installed your current service pack for your operating system. You may need to do this before installing the newer version of java.