Yes, when proper installation methods are followed. Exterior applications require special precautions and installation methods. Do not install floor tile on exterior walls unless the product specifically recommends this application.

Tile Installation over Cracks - I am building a house in Florida, and the slab is a year old, and its cracked. Before I install the ceramic tile, should I use any kind of underlayment to prevent the tile from cracking, and if yes, what kind? Can I use roof paper as an underlayment? I will appreciate your answer, thank you! Old Thin-set Removal - The first floor of my house is currently comprised of carpet in the living areas and tile in the kitchen and major hallways.

Structural strength and resistance to abrasion. We will help you choose the perfect tile to use for your space. One example - we wouldn't advise Mexican hand-painted tiles for a shower, on account of the wider grouting required.

A. Again, this depends on the type of tile you choose. Generally speaking, our floor tiles can be mopped regularly with tile cleaners. We also have stronger cleaners for the initial cleaning, products that are designed to remove any grout residue. These products may also be used to remove most stubborn marks on your floor. Porcelains and some natural products like terracotta and slate require different products; we can give you all the information and a demonstration in the showroom.

Typically the removal and disposal of that type of asbestos containing material is not regulated by EPA (even commercially) if it is in good condition. If the material can be taken up with no significant breakage, there is little risk for fiber release.

Your architect or contractor will be the best judge, but 35 kg per square metre is the prescribed limit for stud and plasterboard walls. We will advise you on the correct seal for any tile you choose. Surprisingly unglazed porcelain, especially if polished, requires sealing.

It's the newest style in wall decoration, molded and hand painted to create 2 dimensional hanging blocks. Instead of the motionless works of art like painting, these tiles can be displayed more creatively - they can be grouped en masse, in series or in checkerboard effect. You can change the patterns and arrangements as your mood suggests. They're transferable reasonably priced as well. It is a perfect gift and collectible item.

Yes you can tile over a painted wall, however there may be limitations. If it is a painted wall for a kitchen splash or a tub surround it should be fine unless it has many coats of paint on it. Concrete walls, the paint must be removed.

Ceramic tile in either glazed or unglazed form do not need to be sealed. These products are impervious to moisture and topical sealers will not properly adhere to them. Also, you can not change or alter the appearance or the sheen of a ceramic tile by adding a sealer. Therefore, a sealer in not recommended for glazed and unglazed surfaces.

Tile mosaics are a wonderful, lively addition that complements the appearance of your pool. They can be selected and ordered upon your visit to choose waterline tile.

Water and oil will bead up on your floor when sealed as recommended in our Installation Specification Guide. You need only mop it up with a sponge. For routine cleaning vacuum or sweep it, as you would any other natural stone floor or a wood floor. To wipe up, use a non-acid based cleaning product. Warm, soapy water is also fine. AquaMix makes a tile cleaning product, Concentrated Stone & Tile Cleaner, which can be used on your floor. Check their website at www.aquamix.

No paint must be removed off of a concrete floor before tile can be applied. Removal of Paint can be done by scraping it or a shot blaster machine.

If the floor is cracked it is advisable to use an anti-fracture membrane, otherwise cracks may transmit through the tile. Also as stated in question #2 you cannot tile over a painted concrete floor.

Do not use household dust treatment chemicals on the tile. Use a vinyl floor cleaner and separate finish. Both must be water-based. Vacuums: Do not use a beater brush on a vinyl floor. Use the proper solid floor attachment for vacuuming. NO WAX! Do not wax a vinyl floor. All of our vinyl flooring contains a no-wax finish. The flooring is non-porous and will not absorb wax. It will build up and collect even more dirt.

Yes it definitely is possible to fit new tiles on top of an old tiled floor providing that none of the underneath tiles are loose or uneven. However it is not advisable as the cost would be high and you would be reducing the headroom (height between the floor and the ceiling). However if you still want to go ahead, then see that the existing surface provides a good 'grip'. If the existing flooring is of glazed tiles then they have to be roughened to give a good grip for the new floor.

We only sell transition molding profiles for our bamboo flooring- available in colors matching our cork flooring colors. Typically, carpet layers or tile setters will install reducer trim as a part of their floor-covering installation.

Wall tiles (because they are not intended to be load bearing) are typically thinner, lighter and softer than floor tiles. Wall tile glazes are not designed to handle the abrasive forces from foot traffic. Increasingly, floor tiles are being applied to walls and this is no problem so long as the walls are strong enough to support their weight and proper ceramic tile installation methods are used. However, it is not usual to recommend using wall tiles in floor applications.

Most of our safes come with pre-drilled holes which will allow you to easily bolt it to the wall or the floor. HOWEVER, most fire proof safes can not have holes is the safe as that would reduce the fire protection. To bolt these safes in we suggest using a silicon-based glue to glue them to the floor.