We do recommend that you install a flow restrictor on your Sterilight system, that way you can be sure that your disinfection is not being compromised.

It is important that you know where your inside shut-off valve is so in case there is a leak or break in your plumbing system, you will be able to turn the water off quickly. Shut-off valves are typically located in a crawl space, basement, or at least the bottom floor of the building. If you are unable to locate it, please call us and we will assist you. See similar questions...

The ThunderBolt is designed to shut off automatically after approximately 8 hours of continuous operation without any button activation. This is intended to help conserve battery life if the unit is accidentally left turned on. If the ThunderBolt is being powered by the external power adapter, this feature is disabled by the microprocessor. See similar questions...

There is a shut off valve on the meter unit, which will turn off all water, preventing it from passing through the meter. However, Pinellas County Utilities prohibits the opening and closing of valves, removing or tampering of the meter unit. Most residential properties have a main valve (house valve) on the outside of the house (some are located in the garage). This valve will prevent water from entering the house. See similar questions...

bull; There are two types of main water valves: the gate valve and the ball valve. The gate valve is recognized by its round handle that must be turned a number of times to open or close the valve. The ball valve is recognized by its single handle that needs to be turned 1⁄4 turn or 90 degrees, to turn the water on or off. See similar questions...

The battery charger on EZI’s products has a feature that detects when the battery is fully charged and automatically shuts itself down. When the charger comes back on and detects that the battery is still fully charged, it shuts down again. So it is an auto test as well – automatically turning itself on and off. Having this capability means the battery will always be properly charged and perform at its peak level. See similar questions...

GWA previously interpreted its rules in a manner that the customer must install a customer shutoff valve. This interpretation was based on several factors including recognition that the practice is good for GWA as well as the customer and that it is a standard practice for utilities. GWA has re-examined its interpretation of this rule and concluded that it may have been erroneous and it is our intention to pursue a rule change that will eliminate any uncertainty in the interpretation. See similar questions...

You should discuss your situation directly with the plumbing company. That is a contract between you and the plumbing company. GWA recommends that you carefully consider the advantages of the shut-off valve before canceling the contract. However, GWA does recommend having the valve installed as it truly benefits the customer. See similar questions...

In most cases, the shut-off valves are located on the same side of the house as the meter box. They may be located in the garage or laundry room. See similar questions...

Flow paths are the direction that a media must travel through the valve in order for it to function properly. They vary from valve to valve and piping instructions, as shown in the Installation and Maintenance instructions supplied with every valve, should be carefully followed. See similar questions...

If the water control valve inside your home or business is leaking, it is the responsibility of the owner to make necessary repairs. If shut off at the curb is required to make repairs, please contact City Hall at 772-7657 to make arrangements. See similar questions...

Requiring a customer shut off valve is a standard practice for water utilities. The valve provides the customer with a readily accessible means to control the flow of water into the home. Water can be shut off to facilitate a routine repair or to prevent damage inside the home in the event of a disastrous pipe break. Some customers use the shut off valve to shut off water when they leave home for extended periods of time to prevent any unforeseen damage from leakage while they are away. See similar questions...

Auto insurance policies from an auto insurance company protect you from economic loss or damage when you are involved in an automobile accident. For example, an auto insurance policy can pay for the cost to repair or replace a damaged automobile See similar questions...

Flow refers to the applications and protocols used to collect and forward data about IP packets traversing or terminating on supported network devices, including switches, routers, and some servers. Collected data generally contains source and destination IP address, protocol, and port information. The information is useful for network application and user monitoring, network analysis and planning, security analysis, accounting and billing, and traffic engineering. See similar questions...

Well, yes and no. New sediment filters can simply be installed, and you're done. As for carbon blocks, RO membranes, and DI resin, that's another story... Manufacturers recommend flushing new carbon block cartridges for at least 10 minutes before using the product water. Don't run the flush water through the rest of your system. Don't run flush water through other stages in your system. See similar questions...

The Home Depot and GE Partnership Program does not allow us to make these types of installations. A certified plumber must be contacted to provide these services due to national code regulations. See similar questions...

When using relief valves, be sure to remember that the reseat point is lower than the start-to-bubble point. To avoid seepage, keep the relief valve set point far enough above the regulator set point. Cutting the supply pressure to a pilot-operated regulator reduces the regulator gain or sensitivity and, thus, may improve regulator stability. (This can only be used with two-path control.) See similar questions...

Please notify CNRI via email to hdladmin@cnri.reston.va.us if you plan to shutdown your server permanently. You need to map the external IP address of the server to the internal IP address through which the users should access the server. This can be done by putting the file "local_addresses" in the .handle folder. This local_addresses file should contain the IP address mapping like this: outsideaddr1 insideaddr1 See similar questions...

Yes. Under routine circumstances water service will be interrupted for about 30 minutes. After service is resumed, you should run a water faucet for about 2 minutes to clear the water pipes of air. See similar questions...