Yes, you can because it is real wood! Once the veneer is applied, you can sand it and stain it just like you would any solid wood.

I prefer to use a large brush or a mop. You want to get large amounts of Stain Solver liquid on the deck surface. Hand pump sprayers often apply too little solution to the surface. If you must use a sprayer, make sure the product has dissolved completely or you will clog the nozzle! Also, be sure you spray on lots of liquid. See similar questions...

All wood surfaces in the Touareg are real. Walnut, Myrtle, and Vavona wood are used depending on the configuration of the specific vehicle. Vavona is the root wood of sequoia trees. Yes. In Xenon-equipped Touaregs, the outer most lights in the Touareg's headlight assembly are high intensity discharge lamps, and are used for the low beam, the high beam, and as the daytime running lamps. See similar questions...

Wood veneer can be applied over wood, metal, fiberglass, plastic and many other substrates. Different substrates will require the use of different glues and, in some cases, veneers with different types of backers. See Question 18 (below) for information about backing materials. See similar questions...

Other than the metal hardware, it is entirely made of wood... beautiful wood! Solid oak is used for the corner posts. Oak veneered panels are trimmed with solid oak edge banding. Under the oak veneer is furniture grade veneer core. We do NOT use MDF or particle board. Our toyboxes are 100% real wood! See similar questions...

No, not without proper surface preparation. Recommendation is to clean surface and remove previous finish, usually by use of a pressure washer or sanding. See similar questions...

You should certainly protect your deck from unnecessary moisture intrusion and the harmful effects of the sun's ultra-violet rays. Use of a penetrating stain, containing water repellant ingredients in most cases will protect your deck best. The pigment in the stain will absorb the ultra-violet rays from the sun and protect the wood fibers from degradation. In most cases a stain will need maintenance every 2-4 years while clear sealers require maintenance every 1-2 years. See similar questions...

The answer is that both are good. Neither solid wood nor veneer is, by itself, a measure of better quality furniture. If comparable craftsmanship is used, the quality of a solid wood or veneered piece of furniture should be the same. What is the best way to dust my furniture? Twice a month dusting of all your furniture is recommended to keep dust from accumulating. Use a soft, lint-free cotton cloth such as an old t-shirt or baby diaper. Very lightly dampen (NEVER wet) the cloth with water. See similar questions...

It can be done but, really, what would be the point? Such a process would detract from the basic function and effectiveness of a seamless, dense and very thin shell. The finishes that I offer are those which my customers ask me to create. Since all Tempus drums are made to order - literally custom built - and since every customer has a personal preference in so many detailed areas, it's lucky that I'm in a position to be so flexible when it comes to custom finishes. See similar questions...

We use plywood veneers to build the interior casework for the cabinets. This is the most economical and stable material to use for this part of the cabinetry. The top, base or skirt, doors and some elements of the end panels are solid wood. Others parts of the cabinetry are some combination of both. See similar questions...

The "Ultra-plast" recycled plastic slats we use do have a classy matte finish with an imbossed grain. The lumber is not meant to look like or imitate wood. The testimonial to the great appearance of the plastic slats is we've never had a compaint or return on these items with over a thousand pieces sold. See similar questions...

Only i-pen Memory comes with a replaceable ball-point pen tip. i-pen Mouse has plastic pen tip. However, you still can get the feel of a real pen with i-pen Mouse. See similar questions...

That will probably seal them in. It may solve your problem, but will give a pebbly appearance to your paint job. Each repainting will seal in the artillery fungus even more. There are no fungicides legally registered (by EPA) against the artillery fungus. Bleach, if it worked, would be very temporary, as it leaches out with each rain. We tested 14 different fungicides in the laboratory, but have to take the experiment to the field. See similar questions...

Veneers are an excellent alternative to crowns in many situations. They provide a much more conservative approach to changing a tooth's color, size or shape. Veneers can mask undesirable defects, such as teeth stained by tetracycline and damage due to an injury or as a result of a root-canal procedure. They are ideal for masking discolored fillings in front teeth. Patients with gaps between their front teeth or teeth that are chipped or worn may consider veneers. See similar questions...

Unlike wood, PVC products keep their good looks year after year with just an occasional rinse with a garden hose. That’s the real beauty. See similar questions...

On a horizontal surface, Penofin may be expected to perform for an average of 9-18 months and 3-5 years on a vertical surface. The time will vary depending on the percentage of sunlight, weather, etc... Yes. All Penofin wood finish colors contain the same ingredients, just different amounts of colored pigments. However, you will not be able to make the surface lighter by applying a lighter shade. As always, you should test a small area before use. See similar questions...

No, "New Wood Defender" is recommended on pressure treated wood, as well as Cedar and Redwood during the first year of weathering. Wood Defender is a latex based product used to stabilize new exterior wood. This product is treated with fungicide to prevent the growth of mildew. See similar questions...

Every package of Just For Men includes a pair of plastic gloves that should be used to apply the mixture. See similar questions...

A film forming coating is a product that does not penetrate into the wood completely. A product that does not penetrate can result in premature peeling and or flaking. All of our wood deck stains will penetrate into the wood when applied properly. See similar questions...

A.This is a job we would not recommend you undertake if you are a novice. Peter has stained hundreds of floors and knows how much skill you need to tackle this job. He has also seen a lot of floors that have been badly stained and it's not a pretty picture. When a floor is stained well it has a beautiful even colour with depth to it. Stained badly and it can look patchy and dull with a dirty appearance. See similar questions...