Either one will work with the cable modem and service Wave provides. However, not all computer systems allow for a USB installation. Before your Internet installation, you must have a computer with a USB port, or have a 10 Base T Ethernet card installed in your computer.

A. The Targus USB Mobile Port Replicator with Ethernet is the world’s smallest expansion hub that provides instant peripheral device attachment and Ethernet via a single USB connection to Windows 98/ME/2000 based computers. Packaged in a small and attractive enclosure, the PA090U can fit any place on a desktop space. Add devices like mice, keyboards, joysticks, network, printers, PDAs, scanners, speakers, cameras, telephones and many more without rebooting your computer.

Some DSL modems carry USB capability. This is useful alternative in instances where a network card cannot be installed. Please note that you cannot use the USB port of a usb HUB to extend the wire length between your modem and PC, or share the access to multiple systems. You can use the USB and Ethernet ports at the same time to facilitate access on two machines provided the advanced modem routing features are enabled.

The wireless modem connects to your computer via an Ethernet Port. The Ethernet port is located at the back of your computer If you do not have an ethernet port there are other options. Call you nearest reseller.

USB means Universal Serial Bus, an external bus standard that supports data transfer rates of 12Mbps. A single USB can be used to connect up to 127 peripheral devices, such as a mouse, modem or keyboard. USB also supports Plug-and-Play installation and hot plugging.

You can use a USB-RS232 converter cable to connect your computer with our instruments if you only have USB port. Please go to our products page to get this converter information.

The USB port is used to update Neurons Operating System as well as to load and store sound models, sounds and setups to/from external mass storage devices or computer networks. You may use it with external hard drives, CDR/CDRW drives or memory-stick type of storage devices. You may also use it to maintain a permanent connection to your computer (PC or Mac) for sequencing, editing and backup/storage.

Absolutely nothing at the moment. All three are disabled. Some people have reported that USB keyboards work, but it's not a supported feature. Others have also powered a PC cooling fan off the USB, but that really isn't necessary. Just keep it well ventilated and it'll be fine.

Yes, if you are a current member of the Sequencher Maintenance Program. Just contact us at support@genecodes.com, quoting your registration number. If you have allowed your maintenance program to lapse, it is possible to rejoin the plan with full benefits and receive the latest version of Sequencher. The cost of rejoining varies based on how long you have been off of maintenance, but it costs much less than purchasing a new license.

Yes, you will have to register twice: once for the wired Ethernet connection and once for the wireless connection.

External adaptors are available for both desktop and laptop computers which connect to either a USB port or PCMCIA card slot.

The WLA660's Ethernet port (RJ-45 jack) supports 10 Mbps over a 10Base-T connection (half-duplex only).

I've connected the USB to Serial adapter but it's on Com Port 5 (or higher) and your software only has Ports 1-4. This issue applies to the c\temp software only. This has been resolved with the new version of the MDAS-Pro software. If you do not have a copy of this software, please contact us.

Yes. There are USB receipt printers, cash drawers and scanners available. If you don't see an interface type you are interested in, please call us.

Many PCs can be upgraded with a USB port. We only recommend adding one if all other minimum PC requirements, listed above, are met.

There are a variety of "aftermarket" products that will allow you to add a USB card to your computer. Check with either your computer manufacturer or with one of the manufacturers of USB cards.

You'll need to use the CubeSat Kit USB drivers. You can use the USB port as a simple terminal interface to the Flight MCU, or you can write your own software in the Flight MCU and/or the host side to do things like serial bootloaders, etc. Physical packaging issues dictate that a user module can connect to the PC/104 bus, and to either the PC/104-Plus bus or the CubeSat System Bus, but not both.

A USB port is a small rectangular opening (often in pairs), usually indicated by the trident-like USB logo. They should be visible next to the other ports on the back of the PC. Most PCs made in the last year will have them. You will need to be running Windows 98 or later to be able to use your USB ports. Add-in USB port cards are available from most PC shops.