To receive the 5.1-channel soundtrack on programs such as the Dolby Digital-encoded theatrical films broadcast by DIRECTV on its pay-per-view channels, you need a new satellite receiver that provides a Dolby Digital output (the "Digital" output on conventional satellite receivers does not handle Dolby Digital signals). As with other Dolby Digital components, you connect the Dolby Digital coaxial or optical output to a digital input on your Dolby Digital decoder unit.

The dish-antenna is a Winegard 30” dish and the receiver is Topfield 3200 or compatible with remote control. If you do not have compatible satellite equipment, CCN will contact an installer on your behalf to install the satellite dish-antenna, necessary cabling and receiver with remote control. The cost of the equipment with basic installation is $595. Click here to contact us.

with Dolby Digital program material, "Dolby Digital" on a component such as a DVD player indicates that it incorporates Dolby Digital decoding, but not the number of channels. Many program sources, including all DVD players and digital cable set-top boxes, provide a built-in, two -channel Dolby Digital decoder with analog stereo outputs (see question 7). For 5.

In order to receive programming from DIRECTV with Dolby Digital audio you would need to have a DIRECTV receiver that has the Dolby Digital capabilities. You will find this option available in higher end systems from RCA, Sony, and Hughes.

the option of their producers, Dolby Digital programs can deliver surround sound with five discrete full-range channels?left, center, right, left surround, and right surround?plus a sixth channel for those powerful low-frequency effects (LFE) that are felt more than heard in movie theaters. As it needs only about one-tenth the bandwidth of the others, the LFE channel is referred to as a ".1" channel (and sometimes erroneously as the "subwoofer" channel). Figure 4-1 illustrates a typical 5.

To receive high-definition programming transmitted via satellite, you will need an HD satellite receiver, and a new, larger dish. Most receivers are equipped like most DVD-Video players, that is, with a built-in, two-channel Dolby Digital decoder with analog stereo out puts, and a Dolby Digital output for 5.1-channel sound with an external 5.1-channel Dolby Digital decoder unit.

Dolby Digital is a system capable of multi channel digital audio, coded using technology previously known as AC-3, often abbreviated as DD.

channel Dolby Digital provides two surround channels to Dolby Surround's one for more precise localization of sounds and a more convincing, realistic ambiance. Also, the surround channels cover the entire audible range (20 Hz ? 20,000 Hz), whereas the range of Dolby Surround's single surround channel is limited (100 Hz ? 7,000 Hz). This further heightens realism and gives sound mixers more creative freedom.

Current estimated costs for set-top digital receivers: $200 and up. As with other computer-based devices, prices should continue to fall. Allows you to receive: all of KET’s digital channels. HD televisions will receive high-definition programs in prime time. You may already have a digital-ready TV without a built-in digital receiver. In this case, you will need to add a digital receiver in order to receive KET digital broadcasts over the air.

Yes, the Sky Plus decoder is Dolby Digital 5.1 compatible. ( As well as other makes & models ) Special jacks at the rear panel are designed to allow easy connection to your Home Cinema station if available.(optical and SPDIF)

Dolby Digital Laserdisc players do not have a built-in Dolby Digital decoder; they output the Dolby Digital data stream from Laserdiscs on a radio-frequency (RF) carrier that requires demodulation prior to Dolby Digital decoding. If you wish to play the Dolby Digital soundtrack, therefore, be sure that the disc player has a "Dolby AC-3 RF" output and your Dolby Digital decoder unit includes an RF demodulator specifically for laser disc use.

Each site typically has a satellite dish 1.2 or 1.8 meters in diameter located on the building roof or ground, cabling from the dish to an equipment rack or computer room, our satellite receiver/decoder, audio/video/data com cabling to the viewing location, and VoIP over satellite equipment for audio return. The ATS Technical Support Department can assist with determining the specific equipment needs, costs, and installation schedule for your specific site.

Dolby technologies put you in the center of your movie-going experience. You will hear five full-range discreet channels, plus a subwoofer channel that coves the bottom one-tenth of the audible range - these are the technologies that create the experience. The dynamic range (the ratio of the loudest sounds to the softest) is significant and the full-range surround channels make lifelike special effects possible-think helicopters flying overhead.

Dolby digital is a sound format featuring six-channel sound with separate left and right sounds and a low frequency-effects channel. Dolby digital is a standard when it comes to sound formats for DVDs, set-top boxes, etc.

Dolby Digital is a surround sound format that supports up to 5.1 channels of discrete multi-channel sound. Since Dolby Digital is part of the DVD standard, all DVD players support Dolby Digital in at least one of two ways. First, DVD players with digital audio output(s) allow you to connect the output of the "raw" digital audio signal to an outboard decoder, typically a function of a receiver or pre-amplifier. Second, DVD players may optionally have a built-in Dolby Digital decoder.

Providing you've got a clean source signal, analog recordings generally sound fine, giving nearly inaudible differences from digital ones. Note however that many computer soundcards have noisy analog output stages, so when recording from a computer, digital transfers are recommended (one exception is the USB based Xitel MD-Port AN1 which runs outside of the PC chassis and produces good quiet analog output).

No, a studio is not required. However for the best quality, a studio setting is preferable. This is accomplished by converting the venue into a "studio setting" by adding broadcast lights, stage elements, production equipment, and crew.

Yes, you can: whether high-definition (HDTV) or standard-definition (SDTV), all digital television (DTV) broadcasts use Dolby Digital audio in the U.S., Canada, and other countries that have adopted the ATSC television standard ( www.atsc.org ). Dolby Digital audio is also used in some countries like Australia in conjunction with other transmission standards. Like other Dolby Digital program material, the audio format of DTV broadcasts varies from mono to full 5.1-channel surround sound.

is a generic description of a multi-channel sound system. All of these surround sound types use 5.1 channel decoding to provide surround sound....