Here are the key things to remember in networking the Borland Database Engine (BDE) for Windows Fair Management. The following assumptions are being made to allow this document to be ......

Students wishing to know how to connect to Boston College computing resources from off-campus should read the BC Help Desk document ' Connecting to BC using a modem to dial in '.

If you already have a network, you will need to find a free IP address for the Ethernaude (it don't work with DHCP functions, this is a mean to automatically affect IP address and it is sometimes use to share Internet access between many computer with Windows 98). You will use a little software bring with the device, that can let you enter the IP address you want, as many time you want. This is use a broadcast call that is understand by the Ethernaude.

You will be asked to type in a name 'CTInets' and choose 'NEXT' to continue (Configure a modem if necessary) Next you will be asked to type in the area code and type '300 87 700', then select a country code 'Hong Kong (852)' and choose 'NEXT' to continue. Click 'Finish' to end configuration.

When a Windows agent is started on a machine with mulitple NICs (Network Interface Cards) it will attempt to use one of the two IP addresses, either the physical or virtual one. Verify the IP addresses using the "ipconfig" command at the DOS Prompt. If your physical card has an IP address and the virtual card does not, the agent will fail to start if the proper binding order is not specified.

Revver, we staunchly support copyright laws. Our mission and business is firmly rooted in the idea that artists deserve to control and be rewarded from their intellectual property. We also believe strongly in the protections provided by the doctrine of Fair Use, which is part of US copyright law, and to comparable protections provided under the copyright laws in various other jurisdictions.

Each room is equipped with a network jack. You'll need an ethernet network card and a ethernet cable for you computer. Once physically connected you need to configure your computer to use DHCP. Additionally portions of the campus are setup to offer wireless access via 802.11 b/g for which you will need an appropriate wireless card.

Sure, you can. Create a primary partiton BEFORE your Windows partition (e.g. with PartitionMagic) and get a boot manager (I use the german tool 'Bootmanager', you can get a free trial version at http://www.bootmanager-pro.de).

Most network management systems are designed to monitor network equipment (hubs, switches, routers etc) from inside your network. Just because your network and servers are working, it doesn't necessarily follow that your customers can get to your site or that they are getting acceptable performance to keep them there. Nexus Watch monitors your Internet services (DNS, HTTP, FTP, etc), over the Internet just as if it were an electronic customer connecting to your site from their home or office.

Yes, but a proxy server or firewall that has not been reconfigured can limit some HotOffice functionality, such as web-based installation, document publishing, and email attachments. Since a proxy server or firewall is designed to block outside access to a network, including access to your HotOffice, your company's system administrator must grant HotOffice access through its firewall by opening the passageway.

Start the Network Control Applet by clicking on Network from Control Panel (Start - Settings - Control Panel) or right click on Network Neighborhood and select Properties Select "Obtain an IP address from a DHCP Service". DHCP settings will only override IP address and subnet mask locally configured. If you have configured DNS, WINS etc locally then the DHCP configuration will not overwrite it.

Note: The following instructions have been verified using Eudora 5.1 under Windows. If anyone is using Eudora under Mac OS X please let us know if the configuration is the same as Windows. Eudora does not allow configuring the server port through the normal options dialogue. However a large number of options are exposed in an initialization file (eudora.ini) read at startup. The contents of the initialization file are documented by clicking on Help->Topics and searching on EUDORA.

Presumably, you will need to run DenyHosts as root (in order for DenyHosts to update /etc/hosts.deny and read entries from /var/log), so you first must become root. Once you have either logged in as root (or used su - root, for instance) you can then run the following command: The above command will launch the crontab editor. To launch DenyHosts every 20 minutes you would then add the following line to the crontab: You will need to substitute your site-specific paths above.

By default Sandboxie is configured to load and start automatically. To have Sandboxie load only when you need it, make the following changes. In Sandboxie Control, open the Configure -> Shell Integration window, and clear the checkbox When Windows starts to stop Sandboxie Control from starting. Open the Windows Services configuration window: Start menu -> Control Panel -> Administrative Tools -> Services. Then locate the Sandboxie Service.

Network management is important and a very critical part of your network. It keeps your network running at optimal performance levels and allows you to monitor both strengths and weaknesses, as well as determine any configuration changes that may be necessary.

A Detailed instructions are available in Section 6 of Internet Texoma's How To directory on this site.

By default, the LiveCD will simply try dhclient(8) with every hardware network interfaces it finds. If you have other network configurations you wish to test, such as static IP or PPP serial connections, you will have to configure them yourself. OpenBSD FAQ 6 is a great place to start.

A:) The CD-ROM which comes with the Ericsson SH888 telephone includes a script which makes a new entry in the Registry. All this does is create a new device name for the COM3: port, which is then accessible to most Windows CE comms applications. You simply select the new IR port device and continue to use your software as before. The process is covered in more detail at the web site of Arne Hess (http://windowsce.hess.net/irda.html) which covers Windows CE /mobile phone topics in detail.

You will have to be somewhat familiar with the Windows95 Network control panel. Here is basically what you need to do: Open the Properties of this device. You should see several Tabs (IP Address, Gateway, and DNS configuration are the ones we are interested in). Go to the IP Address tab. Give your machine an IP Address within the range of your Private LAN (for example, 192.168.0.2). Go to the Gateway tab. Enter the IP Address of the machine running IPNetRouter (typically 192.168.0.1).