The wall jib must be mounted to a structure determined by a qualified person to be adequate. The thrust and pull forces given for each jib, the weight of the jib, the capacity, impact, and hoist weight are some of the factors that must be taken into consideration.

A wall mount bracket is secured in your pool wall during construction or refurbishment. The hydraulic hoses run through the wall mount bracket and pool wall, under the pool deck, and emerge back near the Power Unit. Back to FAQs

Typically the monitor is mounted in the overhead console or on the headliner between the visors but it can be mounted in a variety of places.

LaserLyte came out with a unique claw-type system that securely attaches to the rail/picatinny/weaver base area.

No. All Closet.Tec systems are free-standing floor unit for stability and durability. We do attach the free-standing unit to the wall to prevent any tipping over or danger of the unit falling. This allows us to use the wall, instead of backing to provide the required structural rigidity.

The cabinet is designed to recess into the wall and is held in place using a high performance construction adhesive that has 9 times the initial holding power than any other construction adhesive on the market. First, applying the adhesive to the back of the cabinet frame and then apply firm and even pressure as you insert the cabinet in the cut out. Allow 24 hrs. for proper curing and your ready to enjoy your new built-in cabinet.

The shelf is easily mounted to the wall with hanging hardware that is included. Ideally you want to put screws into a stud for more support. However, if you do not have that option, use the anchor that is provided. Drill a small hole in the wall and lightly tap in the anchor and then the screws. Leave the 1/8 of the screw tip out so you can hang the shelf easily. It’s designed by a mom so it’s very easy… even your husband can do it!

We will need to know the following information: How far out from your house is the eave? Are your overhangs supported with 2 x 4 or 2 x 6's rafters? How far apart are the 2 x? rafters? Your awning includes the required "flashing" to enable you to provide a seal at either mounting location. If at all possible, it is better to mount to the wall for larger or heavier Live Loads. Please consult with us as to your best type of installation (eave/wall?).

Yes, with our specially designed suspension rails, installation is radically easier. Plumb the rails and your cabinets are straight and level every time. Cabinets can be easily removed and relocated to alternate locations.

Yes. British Standards advise all fire extinguishers are wall mounted. All our fire extinguishers are supplied with wall mounting brackets. You may prefer to place your extinguishers on stands or in cabinets. The choice is yours. Stands are ideal for extinguishers located in central locations in a room where there is no wall and the only alternative would be to place the extinguisher on the floor. Cabinets are generally for outside use or on trucks.

Absolutely. While most mounts will be anchored to studs behind drywall, mounting a flat-panel TV on a brick or concrete wall merely requires using different types of hardware and anchoring devices to provide the proper support necessary to keep the TV and mount securely attached to the wall.

Yes. The PDR UPM50 Universal mount has the ability to wall mount. With a Chief mount you can purchase the wall mount accessory arm that allows you to mount your projector on the wall.

Speaker stands, shelves and clamp-style mounts like those used for TV sets are recommended for this task. The one thing you should never do is drill into the cabinet to “fly” an HR626. The cabinet is not designed for this and it will break the airtight seal inside the cabinet, which would prevent the speaker from performing to our specs.

Thermostats should always be mounted on an inside wall and away from drafts, direct sunlight, or any appliances that could affect the performance (temperature reading) of the thermostat. Be sure the area around the thermostat is clear of shelves, pictures or other wall décor that may impede the airflow around the thermostat. In-wall fan heater thermostats are easiest to mount in the same stud cavity (opposite side of stud) about 5 feet above the heater.

Yes. The Main LCR Bracket that comes attached to the LCR’s can be used to mount the LCR’s to the wall. Simply unscrew the thumbscrew knobs to remove the LCR from the Main LCR Bracket and utilize the slots in the back of the bracket to mount to your surface.

Yes. While the unit can be managed totally using a web browser (over a network), there may be times when you may want to manage the unit directly. A basic keyboard/mouse combo may be purchased directly from us when you order the unit or you can use any standard PS2/USB units. The unit also includes a standard VGA port for connection to a monitor.

Yes. The video subsystem on the unit is quite robust and will drive a touch screen monitor. The video supports resolutions up to 1920x1440.

With peel and stick neoprene automotive-type adhesive tape, or if you wish we will affix a magnetic strip at no extra charge. However, we cannot guarantee how well the magnetic strip will adhere in your application. From personal experience it won't survive an automatic car wash.