For the proper maintenance and to protect against moisture leeching into the seams, apply an additional coat of water-based varnish to the tiles after they are installed. Before applying the finish, the tiles must be clean and free of adhesive. Once you have applied the second coat of finish, to keep the cork tiles clean all you must do is vacuum regularly, or sweep with a fine bristle broom followed by damp moping with a ph balanced cleaner.

We recommend sealing your natural stone to help prevent staining. Regular cleaning and immediately blotting up spilled liquids will keep your natural stone looking beautiful for years to come. Clean your natural stone with warm water and a non-abrasive, clear, non-acidic cleaner. For more information about natural stone care, please visit the resource section of our website.

On a regular basis you can sweep the floors to remove any tracked in dirt and keep an anti-dust mat by the exterior doors to minimize abrasive dirt, like grit and sand, being brought in by people's shoes. Other than that, just use a neutral PH detergent or standard tile care product to mop or sponge tiles as required.

Use a soft brush and soapy water to clean your screen. Also lubricate the zipper with Pledge periodically.

In most cases hand painted tiles are as durable as factory made tiles and can be cleaned using general kitchen or bathroom cleaning products. However, the use of acid based cleaners (lime scale removers) and abrasives is not recommended. We find that most of our clients use washing up liquid and a sponge.

x202wipe the tile with a damp sponge mop using a small amount of soapless detergent in warm water. Where soiling is more severe, use a window cleaner such as Windex.

You clean the copper tiles using any standard copper cleaner ? the copper tiles are not coated in any way, so you are dealing with true copper. Experiment with the cleaners readily available from local department or hardware stores - most people prefer the liquid cleaners versus the paste or cream cleaners (due to the mess). Do NOT use abrasive cleaners. Do NOT use copper cleaners on the "Cognac Copper" tiles ? please see #6 below.

The same way you would clean your kitchen counter. Using any regular house hold cleaner should do the trick. However, using a harsh or abrasive cleaner isn't suggested as it can scratch the coating.

Regular sweeping, followed by a clean with a mop dipped into water with added liquid detergent works well for small areas. Commercial cleaning machines are suitable for larger areas.

A solution of warm water and white vinegar. (Up to about 1 part vinegar and 1 part water). In more severe cases you may use Sulfamic Acid Cleaner.

CarpetGraphics™ mats and tile should be vacuumed and spot cleaned daily if used as a floor covering product in traffic areas. Warm water extraction methods should be used when soiling is excessive and cannot be removed with vacuuming. Chemicals and detergents should only be used for spot cleaning or as a pre-spray. They should never be included in the extraction bath. CarpetGraphics™ rubber-backed mats are fully launderable.

For daily cleaning, a damp cloth (water only) is fine. For a more thorough cleaning diluted vinegar solution or any stainless steel spray cleaner (available from your local department or hardware store) is fine. For our stainless steel tiles with the titanium colour coating (Cognac Copper, Black Pearl, Treasured Gold, True Mirror, and Timeless Bronze) you can use the same technique ? we have found that the diluted vinegar solution is best.

Treatments may be dusted or lightly vacuumed with an upholstery attachment for everyday maintenance. If heavy cleaning is necessary, please consult a professional drapery cleaner. Castec solar shading fabrics require a minimum of maintenance. Clean fabrics by using any of the following methods:

We recommend Miracle Cleaner, a specially designed cleaner made for the refinished fixtures. This strong but non-abrasive cleaner will safely keep your fixture clean without dulling the gloss like any abrasive cleaner will do.

All our fitted exhaust systems are covered by a liftetime anti-corrosion guarantee/warranty. Further we provide a 24 month manufacturing fault guarantee/warranty subject to MIJ terms and conditions. If any modifications are made to our product after it has been fitted in our workshop - for example, the use of Nitrous Oxide (NOS), damaged caused by physical impact of any kind including impact with speed restriction bumps etc.

Wax and polish your cabinet as frequently as you would other fine furniture. Use a good furniture polish or past wax. Apply the polish to a soft cloth - do not spray or apply directly to the case. Do not use a silicone-based product. Use extreme caution when cleaning the glass. Use a quality liquid non-ammonia glass cleaner. Apply the glass cleaner to a soft cloth - do not spray or apply directly to the glass.

Answer: Daily Maintenance Do not clean the surface of plate with corrosive detergent; clean ordinary stains with pint dilute, turpentine, alcohol and toothpaste. If the surface is scratched, please grind it with dry or wet 1500# sand paper, then apply meguiar 10# mirror glaze special compound, if it can't recover the gloss, polish the surface chemicals and apply polishing wax. Please put cold water before hot water into the bathtub.