What types of reinforcement should I use in my new concrete driveway?
FAQ'sMost people tend to think more reinforcement is better than less. In fact, builders and other concrete contractors sometimes don't use any secondary reinforcement because it takes time and adds to the cost of construction. The reason for secondary reinforcement is to keep your slab from settling / twisting and to keep cracks tightly held together. However, the #1 guarantee is that concrete cracks no matter how its designed or installed - that's the nature of the beast.
Can I lay my new paving stones over my existing concrete driveway and patio?
Architectural Block, Architectural Masonry Products, Masonry...Yes, provided you have ample room to allow for the additional 3 inches that will be above the concrete. If this is going into a doorway, you may have a problem with clearance. Also, the concrete should be free of any major cracks. Remember, any movement in the concrete slabs that you are going over will show themselves in the surface of the paving stones. See similar questions...
How soon can new concrete be put into use?
Ready Mixed Concrete Co. - FAQDuring periods of moderate to warm weather, new concrete could be opened for pedestrian traffic in twelve to twenty-four hours, or when the surface becomes "scuff resistant." A general guideline is that new concrete should not be opened for vehicular traffic for a minimum of seven days. This seven-day period can be significantly reduced by using a faster setting, stronger concrete mix. See similar questions...
Can PVA replace steel reinforcement for concrete?
Frequently Asked QuestionsYes, in many cases. Or it can be used to reduce the steel needed, or the concrete required to protect the steel. Please call us to discuss your application. See similar questions...
Where do I specify the yield strength for concrete reinforcement?
Computers & StructuresWhat does “Global” in the lower right-hand drop-down list refer to? It refers to the coordinate system being used with the current display. Users can have multiple coordinate systems associated with the same model, cartesian and/or cylindrical. When more than one coordinate system has been defined, users can switch between them using the drop-down list in the bottom right corner of the SAP2000 screen which usually defaults to “Global”. See similar questions...
Why use concrete?
Basketball Courts?Deshayes Game CourtsConcrete allows us to build a better court, guaranteeting the base for 10 years. One of our chief concerns is durability, and steel reinforced concrete meets that goal. On a DeShayes game court you will experience years of enjoyment because we used the combination of a concrete base for a durable foundation and a suspended sports surface for player comfort and safety. See similar questions...
What is reinforcement and why should I use it in my slab?
Cement Concrete & Aggregates AustraliaConcrete is strong in compression (squashing) and weak in tension (stretching). The introduction of steel (reinforcement) in concrete improves the strength of concrete in tension. In a slab-on-ground, reinforcement increases the tensile strength and helps control the width of shrinkage cracks. If soil conditions are known to be poor, eg expansive clay soils, consult a structural engineer. See similar questions...
Why is concrete a more desirable driveway material than asphalt?
Tarmac: Ready Mix ConcreteThe reasons are many. First, a properly placed concrete driveway has a much longer life expectancy than an asphalt driveway. A concrete driveway is much cooler in the summer months. Residue from an asphalt driveway can potentially be tracked into your home. This problem does not occur with a concrete driveway. There are many architectural applications for concrete. This allows for different colors, textures, etc. See similar questions...
How do I remove oil stains from my concrete driveway?
Cement Concrete & Aggregates AustraliaOil and grease stains can be difficult to remove completely because they penetrate the concrete surface rapidly. If an oil spill occurs, stop it spreading by encircling with sand, dirt or sawdust. Soak up as much surface oil or grease as possible with an absorbent cloth or powder. Cover residue stain with a poultice made of 1 part lime to 2 parts mineral turpentine. Spread a 5mm layer of the paste over the stained area ensuring a margin of 50 to 100mm around edges. See similar questions...
Can interlock concrete pavers be used for my driveway?
West-Hill Landscaping - Snow Plowing and Winter Services ser...Absolutely! 12"-18" of compacted base material is recommended for residential driveways. A standard 2-3/8 thick paver can be used for light vehicular (cars and pickup truck) applications. A Colonial random pattern is most popular in these situations. See similar questions...
How can I prevent concrete steel reinforcement from corroding due to the presence of chlorides?
Concrete Admixtures - Grace Construction Products - United S...A well designed, durable, low permeability concrete mix, with an appropriate water to cementitious materials ratio (w/cm) using a high range water reducer will provide some protection against corrosion of embedded metals due to the presence of chlorides. Additional protection can be obtained by further reducing the permeability of the concrete with the use of Force 10,000® microsilica admixture and including DCI® Corrosion Inhibitor for long term durability. See similar questions...
What are types of files that I can upload to Driveway?
Frequently Asked Questions for online sharingAny type of file can be uploaded on Driveway. But files violating our terms of service, copyrights, obscene or abusive content are forbidden and will be removed. Please notify Driveway if you see such files uploaded on our site by using the ‘Report Abuse’ option. See similar questions...
Can I use PVA fibers with my steel reinforcement?
Frequently Asked QuestionsAbsolutely. PVA fibers can be used to enhance the strength and ductility of your existing design simply by adding fibers while mixing the concrete. See similar questions...
Do I have to put my new numbers on my house and my driveway?
FAQ - Road Naming and Addressing - Permit & Resource Man...Yes. The new address numbers must be posted where your driveway meets the road and must be visible from both directions of travel on that road. You must also put your address numbers on your house in a place where they will be visible from the road or from your primary driveway. The numbers must be reflective, must contrast with their background, and they must be at least four inches tall. Don't forget to change the numbers on your mailbox. See similar questions...
I want to put in a new driveway. What do I need to do?
FAQ'sComplete an Entrance Application form, which is available at the County Engineer's office, 1400 West 6th St., Carroll, Iowa. The application form must be signed by the landowner and indicate where the entrance will be built. The landowner will then need to mark the location of the proposed entrance and the Engineer will examine the site to determine the necessary size entrance pipe. See similar questions...
Do I need to get a permit to put in a new driveway?
Road Commission for Montcalm County (Frequently Asked Questi...Normally the answer is yes; however, it is always advisable to contact our office and your township zoning board. Anytime a person or business does any construction work in the road right-of-way (normally 66 feet - 33 feet each direction from the center of the road) the should obtain a permit. The townships pay for the application of chloride on local roads in their township, and each township contracts with the Road Commission to take care of this. See similar questions...
Explore Other Topics
Do I need to take the CFE Exam Prep Course?How many people play poker?
What are the SIMPLE-IRA contribution limits?
How long do I wear the white (TED) stockings?
Is it true that goats eat anything?
What are advisable diets and menu plans for pregnant women?
How often should I change the battery in my smoke detector?
What's the best time of year to fish in Hawaii?
