Yes, you must Heat Set both fabric inks and fabric paints when your stamped images are completely dry: do not be impatient! A hot, dry iron is required and you'll need to iron for about 2 minutes on each area that you have stamped, using a press cloth if you like. For best results iron on BOTH sides of the fabric and let your fabric 'set' for a week or two before washing it. Following this procedure is very important to help prevent any fading of the ink or paint that you have stamped.

NO! One of the greatest things about Simply Spray is that it sets itself! You do not need to iron or put it in the dryer! Just wait 72 hours before washing!

When you use the Fabric Sheet, the design is printed on fabric and that entire piece of fabric is ironed on to your crafting material. This is good for Memory Quilts, Pillows, Wall Hangings, etc. - anything that won't need frequent washings, as the Fabric Sheets cannot be laundered unless they are treated with several coats of acrylic sealer. The Cold-Peel product is a transfer that transfers the printed image directly onto your crafting fabric surface.

Vintage heat transfer iron-ons were made from plastisol ink that was printed onto special transfer paper. The ink was printed in reverse on the paper and coated with fine adhesives to help it adhere to the t-shirt. A professional grade heat press is then required to release the transfer design from the paper and adhere it to the t-shirt.

Although there are times when an alternative might work better, the most cost effective method of installing iron fences tends to be to set them in concrete.

Yes, all of our heat transfer iron-ons are originals from the 70's and 80's. These are all original dead stock from retail stores that closed their doors. Because these heat transfer iron-ons are over 20 years old, we test all of them to make sure they still look great but please remember that due to their unique nature some designs may show slight variations.

If you can't find it on our web site please feel free to send an email inquiry to help@transfernation.com. We are still sorting through our inventory and are adding new designs every day. It's possible we have what you want but just haven't posted it yet.

Yes, just send an email to orders@transfernation.com and let us know which heat transfer iron-ons you're interested in buying.

Yes, the rights were copyrighted and/or licensed through companies such as Roach, L&H, Rat's Hole, MACH III, Trans Photo, Holoubek Studios, BOW, Harvey Cartoons, Duo Glow, Solar-Trans, Techni Glitter and many more.

A hand iron cannot be counted on to produce perfect results every time. This is especially true of hand irons that shut off automatically if held in-place without moving for more than a few seconds! The key to good application results lies in your ability to heat apply transfers with the correct temperature, time and pressure as provided by each transfer paper's manufacturer.

You can iron directly over Simply Spray, but not Stencil Spray. It is not necessary to iron Simply Spray to heat set it. Stencil Spray should be treated like silkscreen and care should be taken to avoid ironing it. Ironing directly over the paint could distort the appearance.

If you have your own fabric, either call me and or send me an e-mail and we'll make arrangements to get your fabric and explore what type of pattern you would like. You will find my contact information on the "Contact Us" page of this website.

Before stenciling the fabric, wash and dry it according to label instructions. This will remove the sizing (chemical coating) in new fabric. If the sizing is not removed, your stencil paint will not bond well with the material. When stenciling on fabric, it is much easier if you can keep the fabric from moving around. Do this by using a light coat of spray adhesive on a piece of cardboard that is about 2" larger than the piece of fabric you want to stencil.

Fabric pricing is stated on the products page per item. Some items may be priced differently depending on weight and Manufacturer Costs. Rolls of Fabric (50-60 yards) Please Inquire. Depending on yardage ordered will depend on price quoted. This price does not including shipping. Please email us for your order and we will be happy to discuss this with you. IF purchasing more than 5 rolls at a time, payment must be made with a check unless prior arrangements have been agreed to.

Initially, it takes a new machine quilter 45-50 minutes to get the fabric pinned. Speed and agility come with repetition and reduce the prep time to 30-45 minutes.

Heat stroke is the most serious heat-related illness. It occurs when the body becomes unable to control its temperature: the body’s temperature rises rapidly, the sweating mechanism fails, and the body is unable to cool down. Body temperature may rise to 106°F or higher within 10 to 15 minutes. Heat stroke can cause death or permanent disability if emergency treatment is not provided.

There is an excellent wood stove with a not-so-excellent chimney. The problem was that the chimney had a good sized crack in it, which we repaired with aluminum foil! The wood supply is excellent too—lots of driftwood. Another problem is that a million wasps come out inside the house as soon as you light the stove and warm the house a bit.

The way we remove rust from machined iron surfaces at the foundry, is with plenty of solvent (or diesel oil) and a scotch brite pad. Wear rubber gloves so you don't dry out your fingers. When the metal is shiny, wipe on a coating of oil to protect it. For areas that cannot be oiled, because of paper contact, try Johnson's Paste Wax. Rub it on heavy, and don't polish it off. It will self-polish, and protect in the mean time.