For video, use the S-Video connection. If your VCR does not have S-Video, use the composite video connection. For audio, use a pair of stereo audio interconnects to connect the analog stereo audio output (RCA jacks) from the back panel of the VCR to the corresponding audio input for the set of video inputs used (e.g., "Video 3"). If you have a home theater receiver, make the audio connection to your home theater receiver instead of your Digital TV/HDTV.

Hooking up external components to your digital cable set-top is easy. For more information, please refer to the Users Guides section for hook-up diagrams.

Computers and printers require special care. Wires and cables need to be disconnected and a blank floppy disk may need to be inserted in your PC to protect the disk drive. Monitors and hardware should be wrapped similar to other home electronics. We recommend that you backup your system on to floppy disks and take them with you during the move. Flat Screen Televisions and monitors need special care. Please contact your manufacturer for proper moving instructions.

Yes you do. In order to establish a non-addressable system, it is essential to have a converter. A cable ready TV, VCR and a Cable Company box do not provide for this feature and in not doing so, cannot replace a converter. You must have a converter to use a descrambler. This is especially true if you desire a converter/descrambler that cannot be altered or addressed by your cable company.

You must use a digital TV adaptor/converter, called a Set Top Box (STB) to convert digital TV signals for recording on your current VCR.

The Swann Black Knight Camera receiver comes with an AV cable which plugs into the Video and Audio connectors on your TV or VCR. These plugs are commonly referred to as RCA plugs and are similar to the connectors used by game consoles and DVD players. If you plug your Swann Black Knight Camera's receiver into your VCR so that you can record the footage, you will need to select the AV channel on your VCR and then the channel on your TV that you normally use to watch video movies from your VCR.

You can connect your Portable Media Center to a TV or stereo if you connect one end of the composite video cable to the A/V out option that is on your Portable Media Center, and the other end of the composite video cable to your stereo or TV. The device supports both NTSC (United States) and PAL (Europe and Asia) TV output settings.

Each hall has a television in the lobby for your use, but you may bring your own TV or stereo. You may want to coordinate with your roommate(s) so that you can utilize your room space well. Consider bringing headphones if you play your TV or stereo loudly - that way you won't bother other students who may be trying to sleep or study.

It might be possible to get a USB capture card/TV card, but there will be a couple of problems. First, you will NEED a new hard drive period: 2 gigs will not cut it for video. Secondly, the XBox only supports USB 1.1 FULL Speed, NOT USB 2.0 HIGH Speed. So, the quality of your recordings be towards the lower end of the spectrum (VHS quality, or worse). It might be easier to just stick with a TiVo... Answer-2. Some DVB usb sticks work quite well (or indeed only) with usb 1.1.

Long answer: The minimum requirement for reproducing audio and video on DVD is an MPEG video stream and a PCM audio track. (Other streams such as Dolby Digital audio, MPEG audio, and subpicture are not necessary for the simplest case.) Basic DVD control codes are also needed. At the moment it's difficult in real time to encode the video and audio, combine them with DVD-V info, and write the whole thing to DVD. Even if you could do all this in a home recorder, it would be extremely expensive.

Everyone wants these to be TV's, but in most instances they are actually more closely related to the VCR. In a lot of models the only remote control that will satisfactorily work combo sets is the manufacturers original. In many cases even manufacturers that build their own TV's, have some other manufacturer build their TV/VCR combo's.

Depending on the connectivity of your broadcast satellite set-top box and your Digital TV/HDTV, you should use the following video connection to your Digital TV or HDTV (listed in order of preference, from best quality to mediocre: For audio, use a pair of stereo audio interconnects to connect the analog stereo audio output (RCA jacks) from the back panel of the broadcast satellite set-top box to the corresponding audio input for the set of video inputs used (e.g., "Video 2").

For video, use the component video output of your DVD-Video player and set your DVD-Video player output to progressive scan, if you have a progressive scan DVD-Video player. The selection can be made either by a button on the back panel of the DVD-Video player or via DVD-Video player's menu selection, depending on the your particular model. If your DVD-Video player does not have component video output, then use the S-Video connection.

It's generally not a good idea to route the video from your DVD player through your VCR. Most movies use Macrovision protection, which will cause problems such as a repeated darkening and lightening of the picture. See 1.11 and the Video RF section of 3.2 and for more info.

Our boats are equipped with generators so you can bring a TV/VCR. Don’t bring a TV alone as you won’t pick up any channels out on the lake. Our Lady of the Lake Series boat comes with a TV/VCR so don’t forget to bring some tapes along if you wish. Many people enjoy not having a TV.

Simply connect your coaxial cable into the HUSKYvision faceplate (the faceplate with only one coax connection) and the input jack on your cable-ready TV or VCR. Coaxial cables are available at the UConn Coop. If you have a VCR, connect your coaxial cable from the cable INPUT to the HUSKYvision faceplate. Then connect the OUTPUT jack from your VCR to the INPUT jack on your TV.

After you have set your TV / VCR to receive a cable signal, you will need to autoprogram it. You may also need to autoprogram your TV after any power outage or if your TV / VCR is unplugged.

Answer: Plug one end of the included iFIT.com audio cable into the iFIT.com jack near the machine's power cord or under the console. Next, plug the other end of the iFIT.com audio cable into the included adapter. Plug the adapter into an AUDIO OUT jack on your VCR. If the jack is already being used, you will need to purchase a 3.5 mm Y-adapter at your local electronics store.

Yes. Each bedroom has a TV aerial point. Computer ports in bedrooms are available at a small extra cost. You must bring earphones with your stereo.