The requirement is similar to that of USB 1.1, but all components will have to be USB 2.0 compliant. A successful USB...

Windows 98 default supports only USB 1.1. Install a USB 2.0 PCI adapter then USB 2.0 device still can work fine in Windows 98. Some device such as Micronet´s USB 2.0 adapter, it includes a USB 2.0 driver written by third party so it can work in Windows 98SE.

You will need a USB 2.0 host controller card, a USB 2.0 driver and an OS that supports USB 2.0. It should cost from US$80 to $150.

Before inserting your USB memory stick, please log in to the machine directly (not via SSH from another system). Logging in at the console will ensure that the USB memory device is mounted with you as the owner. It is safest to insert the device into one of the USB ports on the front of the computer (rather than those on the back or on the keyboard).

The entire bus under the USB 1.1 root hub will slow to 12Mbps. The operating system will probably notify the user...

The exact error message looks like Could not find USB device (vendor 0x0000, product 0x0000). Make sure this device is connected to the computer You have to set up the permissions on your USB device correctly. See Section 4.3, "Setting up permissions for USB ports".

Almost every conceivable peripheral has a USB 2.0 version ranging from a HDTV tuner, a micro hard drive to even video card / USB monitor. So, even if you buy a all-in-one HP multimedia PC with all the gizmos, you'll still need something USB. (Maybe not Everything USB). Should you own a laptop, you may like to know that USB is also your ticket out of the proprietary world. It used to be that docking stations must all match that exact notebook model due to the proprietary connection.

The USB 2.0 Flash Drive is fully backwards compatible with USB 1.1 sockets. However the device will only transfer data at the speed of the sockets.

Quatech has implemented a Low-Latency mode on all USB 2 devices. This setting can be found on the USB Serial Ports Advanced Options tab of the device manager. Each port can be set individually.

On Solaris 8 and Solaris 9, check with prtconf -D whether the host controller is usba10_ehci, for example on Solaris 9: usb, instance #0 (driver name: usba10_ehci) On Solaris 10 and later, check /var/adm/messages for messages similar to: Dec 13 17:05:57 mysystem usba: [ID 912658 kern.info] USB 2.0 device You can use 'cfgadm' to find the port that your device is connected to. See the man page cfgadm_usb(1M) for details.

Yes but they will only work at USB 1.x speeds. The only time you will get the full 480Mbps speed out of a USB 2.0 controller is if you are using a true USB 2.0 device. Back To Questions

USB stands for Universal Serial Bus and is available on all new computers. Depending on the age of your computer, it may or may not have USB ports available. If not, the Sylencer will plug into a standard computer sound card, although this will not provide as good recognition as with a USB adapter. To see if your system supports USB, go to http://www.usb.org/ and download and run the free utility 'USBready' that will determine whether or not your system supports USB.

USB has speeds of up to 12 Mbps where USB 2.0 can use speeds up to 480 Mbps, making it 40 times faster! Back To Questions

You can go 5 meters or around 16 feet from a computers USB port or from a powered USB hub to a USB device. Back To Questions

Solaris supports Digi InsideOut Networks' devices and recently, KeySpan and Prolific chipset based devices' support were also integrated to Solaris. Keyspan and Prolific USB serial drivers are available in Solaris Express dated 2/2006 and in Solaris 10 Update 2 and later. PL2303 chip based adapters and Keyspan USA-19HS adapter are available as part of Solaris 10 Update 2. Keyspan USA-49WLC adapter is supported in Solaris Express dated 3/2006 and will be available in Solaris 10 update 3.

If you have purchased a seat license of a ProjectMatrix product with a USB security key you will still need to register the software.

Not only will it not work, you may damage your device. In order for a device to work with USB it must be compatible and have appropriate drivers. Some early releases of the Freestyle Pro and Precision Pro were not USB compatible; if it did not come with an adapter you are out of luck.