Not all portable phones can connect to an extra antenna. It depends on your phone model and the availability of a connector to mate up with an antenna. There are many antennas to choose from. They include stubby antennas that are perfect for traveling, ¼-wave antennas you can use outside your vehicle, magnetic mount antennas for the top of your vehicle, and small antennas that suction to the window.

refers to a family of specifications developed by the IEEE for wireless LAN technology. 802.11 specifies an over-the-air interface between a wireless client and a base station or between two wireless clients. The IEEE accepted the specification in 1997. The 802.11a specification operates in the unlicensed 5GHz range and offers data speeds up to 54Mbps. The 5GHz range is not yet crowded so it offers advantages in speed over the 802.11b specification which uses the more crowded 2.

It supports the 8410-WD Classic Gold PCMCIA 802.11b WLAN card. The AP-500, and AP-1000 does not support 802.11g. For an 802.11g application the AP4000, or AP2000 would be recommended.

IEEE 802.11b, 802.11g, and 802.11a are industry standard specifications issued by the Institute of Electrical and Electronic Engineers (IEEE). These specifications define the proper operation of Wireless Local Area Networks (WLANs).

b Technology was the first WLAN technology to be commercially accepted and widely deployed. 802.11b Operates in the 2.4 GHz ISM band and supports wireless data rates up to 11 Mbps. 802.11b has the largest installed base, is the most mature and cost effective 802.11 technology. 802.11a Technology was developed as a way to increase the wireless data rate. Operating in the 5 GHz ISM band 802.11a supports data rates up to 54 Mbps and provides more channels than 802.11b. However, 802.

Some models are equipped with 802.11a and/or b, while others are now using 802.11g. Check with the individual manufacturers to see if they'll be supporting an upgrade to 802.11g. Some newer models are being released with the faster wireless capabilities.

b+ non-standard : No guarantee on supporting any standard due to the instability of this non-standard. Do not support Dual Band.

An external antenna is mounted on the outside of your vehicle to increase your phone’s range for optimum performance. These antennas are used with mobile phones (cellular phones permanently mounted in a vehicle) and with handheld phones that employ a hands-free kit mounted inside a vehicle. In a sense, all cellular phones have an “external” antenna that sticks out of the phone when the phone is in use.

An external antenna is mounted on the outside of your vehicle to increase your phone's range for optimum performance. These antennas are used with mobile phones (cellular phones permanently mounted in a vehicle) and with handheld phones that employ a hands-free kit mounted inside a vehicle. Most users no longer use these types of phones or need an external antenna.

You can connect most phones to an external antenna by using an installable hands free kit that comes with an external antenna adapter. You can also purchase an external antenna adapter that allows you to connect the antenna directly to your phone. Some phones have an external antenna port. Other phones require that you remove your fixed antenna and insert an external antenna adapter to that port. Still other phones have no way to connect an external antenna to it at all. Read more here...

Some Verizon Wireless PC Cards may come with either a removable antenna or an extra connection port for an external antenna. This can be used when you are inside a building or a car to help pull in a stronger signal and improve your connection in fringe or low reception areas. Verizon Wireless provides two types of external antennas: Window Mount is mounted on the edge of a car window or attached to the window in a building. An adaptor cable will be required to connect the external antenna.

The MM2211 does not support an external antenna. The MM2211 uses a combination of vertical and horizontal antenna arrays to maximize connectivity.

Answer: The Brainboxes PCMCIA cards are supported in Windows 98, 2000 & XP, with limited support in NT. The cards are not supported in DOS. The PCMCIA serial cards use Microsoft's own serial driver, and will only install as COM1 or COM2 - one of these will need to be free to install the card. Note: 2 port PCMCIA cards not supported in Windows NT and PM-120 is Full-Duplex mode onlyI am trying to install my PCI / PCMCIA card in Windows 2000 / XP and an error has occurred. Windows is asking for a .

This is available on a few of the projectors which allow you to give presentations without a computer. Microsoft Powerpoint and Lotus Freelance Graphics presentations can be downloaded to a memory card (PCMCIA) which the projector then uses to display the presentation. You receive all the software, instructions and cables you need to do this with your projector.

The PC Card Standard provides physical specifications for three types of PC Cards, with additional provisions for extended cards. All three card types measure the same length and width and use the same 68-pin connector. Because they differ only in thickness, a thinner card can be used in a thicker slot, but a thicker card can not be used in a thinner slot.