Yes we can. In some case it has taken longer than normal but we have succeeded. We understand how black or dark vehicles need to be treated and offer a No Swirl Guarantee on any dark coloured vehicle.

If you look at a cross section of clearcoat paint, you will three three basic layers of paint on the bodywork of the car - the base coat, the color coat and the clear coat: If you look at your car under a bright light, for example sunlight, sometimes you may see very thing scratches in the paint. There can be lots of these, like someone's draped multiple spider's web across the paint.

If your question has not been answered please fill out the enquiry form and we will get back to you with a response.

Usually it was the panel shop’s apprentice who used a ‘dagger’ brush, aptly named because of its shape. Quite often the tip of this brush was bigger than the paint chip or scratch and the vehicle looked as if it had the ‘measles’ Panel shops have moved away from this form of minor repair as it is not their core business.

No. We can only repair minor Gutter Rash where your wheels come it contact with the blue stone and concrete gutters. Major damage requires you take your Alloy wheels to an authorised repairer, with whom we can put you in touch.

Good question. Panel shops will completely respray a damaged panel if there is a deep scratch, dent or blemish on that panel. This is where a lot of the cost comes in as the have to sand the panel, undercoat it and the repaint that panel. It is a lengthy process and with some panels no matter how hard they try a difference in colour is noticeable. Chips n Scratches only repair the damaged area. This way we are able to reduce costs and become more cost efficient.

Ever vehicle has its very own colour code, it is from here that we match your colour. We carry in excess of 500 popular colours yet if we do not have your vehicles we will make from the paint code. In some case even the correct paint code is a little off, when this happens we endeavour to blend the colour so you won’t notice the difference. Yes we do. We understand how black and dark vehicles need to be specially treated, so we give you a No Swirl Guarantee FPC.

Yes, if they are minor, light scratches. It will eliminate the tiny "feather" scratches caused by many car wash brushes. The product does not contain any ingredients which can fill deeper, more serious scratches. To remove light scratches, spray the scratched area with a 12" X 12" coat of DRI WASH 'n GUARD?. Place a conventional high-speed buffer, with a foam bonnet, directly against the scratched area.

For starters you do not want to get rid of the swirl marks! You want to clean them out with Prep (Pre-Cleaner) to get out excess dirt and old wax. Then use the Finish First polish to fill them in. Remember everything you do to your car/motorcycle finish should be done laterally just as your car/motorcycle is painted. NEVER use a circular motion when working on your car/motorcycle finish. This type of motion can cause swirl marks and spider webs.

Some swirl marks that you see in your paint are caused because of a previous polishing or waxing of the vehicle in which the wrong type of pad or a dirty pad was used. Swirl marks can also be caused if, when polishing, the appropriate RPM was not set. Other "swirl marks" that appear on a vehicle may in fact not be swirl marks but the way the sunlight reflects off of the paint giving the reflected appearance of a circular or a spiderweb-type formation.

Small chips and cracks can usually be repaired during the preparation stage of the refinishing process. If it is just a single chip, we can often fill and refinish just the damaged area. With careful color matching, the repaired chip will be practically invisible. Plumbing manufacturers such as Kohler, Eljer, and Jacuzzi regularly use Miracle Method to repair fixtures which happen to be damaged during shipping or installation.

Chips and scratches will be filled in and sanded before the reglazing will be completed. Our goal is to offer you a brand new looking tub that actually looks like a new installation. The finish is so professional that most people will not know that it has been reglazed.

Oh yes - it doesn't take long and you won't see the patch up. First we have to make it into a digital file by scanning the film, photo or artwork - then we can remove stratches and blemishes.

Speculation has been that the factory puts on a somewhat-thin coat of paint and also a somewhat-thin layer of clear coat. Most people also have these problems, so you're not alone.

Yes. The Caviar Face Lightening Cream and the Beauty Lightening Milk are intended to fade blemishes, spots and marks. Within time, even old blemishes will disappear. Some real harsh blemishes may require the Skin Repairing Serum, a concentrated gel applied to severely darkened areas only.

After a normal production strike the coins were counted by being run through a counting machine and put in bags that were thrown around without regard to numismatic posterity. The workers at the mint were not concerned about the appearance.

You can revive your Brillante with Simichrome, a wonderful non-abrasive polish available through your Brillante dealer, but if it has been deeply scratched, there is no way to thoroughly buff out these marks. We recommend storing your Brillante in its flannel pouch for optimal care.

Over time the cooking surface will become "worn" and get tiny scratches from regular use. Many people like that and refer to it as "patina". Should it get to much for your taste, just have the surface "buffed up" by a professional.

Dents are depressions in the wood where the grain is not broken. Scratches and gouges are areas where the grain has been damaged. After the finish is removed, most dents can be steamed out. Fold a piece of paper towel, wet it with cold water, and hold it on the dent. Place a hot iron on the dent for a few seconds until steam is forced into the wood. The dent should rise after a few applications. Sometimes a small amount of sanding is required. Always experiment in an inconspicuous area first.