Vinyl siding or new aluminum may be painted with a 100% acrylic finish without priming, as long as the surface is clean and dry. Weathered aluminum needs to be cleaned and then primed with an oil based primer before applying the acrylic topcoat. When painting vinyl siding, be sure that the color chosen is a shade no darker than the original color because dark colors absorb heat from the sun and may cause warping or buckling.

In the case of aluminum or vinyl sidings use the IPexterior plugs as usual, installed in a 1" drilled hole. You can install the plug without making an unsightly indentation or installation mark in the siding by using a 1 3/8" hole saw on the siding only, which will allow the plug to be drawn up flush with the siding and prevent any buckling when the cap is installed. If there are signs of the siding buckling, back off on the plug so that the cap fits snugly against the siding. See similar questions...

Yes. All surfaces must be clean and free of debris prior to painting. Repainting aluminum siding can make it appear new and can be done for approximately 1/4 to 1/3 the cost of having new siding installed. See similar questions...

In a way, it's almost no contest. When compared to wood, brick, stone, stucco, and metal sidings on the basis of initial cost, maintenance costs, appearance, durability and value, vinyl siding is clearly superior. Alside offers a broad range of vinyl siding products, so you can choose one that's easily affordable. Whichever you choose, you can expect the highest quality and lasting beauty. And Alside vinyl siding never needs painting or staining. See similar questions...

Yes. You just cut away the siding, mount a pressure treated ledger board 2" x 8" (the same width as your awning) wrap it in aluminum, then mount the awning to the board. Or, you can paint the board the same color as your house or trim if you want so it will blend in nicely with your siding or trim. Our stationary canopies or awnings can be installed directly onto any siding, be sure that the screws are mounted into studs for a secure fit. See similar questions...

Answer: Yes. It's easy. Our Motorized PRO model can be installed directly onto any siding without a board provided the proper anchors are in place. See similar questions...

Vinyl siding is one of the most versatile exterior design products you can work with. Alside, for example, offers many different vinyl siding lines. That broad selection lets you choose among a wide variety of design options, including horizontal and vertical siding; traditional clapboard and authentically detailed "shaped" sidings; wide and narrow panel exposures; smooth, subtle and deep wood grain textures; plus a wide assortment of traditional and contemporary colors. See similar questions...

Absolutely. The correct technical name for the material used in vinyl siding is polyvinyl chloride. It's a strong, durable, proven material that has earned a solid reputation for its beauty and permanence. It's used in automotive applications, medical devices, defense weapons, appliances, floor coverings, and of course, home construction. It's ideal as an exterior material because vinyl siding doesn't rot, crack, dent or warp. Plus it never peels or blisters. See similar questions...

Ordinarily, the cleaning action of a rainfall will be adequate to wash your vinyl siding. However, vinyl siding and soffit should be washed periodically by hosing with a garden hose and clear water, particularly in those areas not exposed directly to rain. If you desire to do a more thorough cleaning, or where high soil collection conditions occur, use a soft-bristled, long-handled washing brush. It attaches to your garden hose and makes washing your siding easier. Do not rub vigorously. See similar questions...

Sure. Vinyl siding is extremely versatile and can be used with just about any exterior building material?brick, cinder block, even natural logs and field stones. If you have special installation concerns?such as running vinyl siding along a natural stone chimney, for example?talk to your contractor. He's probably handled a similar installation in the past. If he hasn't, he always can get detailed installation instructions from an Alside technical specialist. a homeowner, that's important. See similar questions...

Yes, many of our customers use our wooden products on vinyl-sided houses. For most items we recommend 'round-head' (also called 'pan-head') brass screws, with screw heads left exposed. Screws allow more adjusting than nailing, avoid damage from hammer blows, and permit easy removal for maintenance. See similar questions...

Yes, however you must submit your application for a permit to the Board of Architectural Review for approval. See similar questions...

Yes. Concrete Cleaner is designed to work not only on concrete, but also on masonry, brick, granite, open face block, decks, pools, pavers and vinyl siding. See similar questions...

For color requirements not available in anodizing dyes, painting is sometimes necessary. Anodizing provides an excellent primer base for paint applications. Anodized surfaces can also be silkscreened, dry-lube painted or powdercoated. For painting applications, it is recommended that the anodizing not be sealed. See similar questions...

The Foundry™ had many choices when it was time to make a decision regarding types of siding material. The long-life vinyl we chose has a proven history of resilience, will withstand weather extremes, and can be manufactured in a wide range of spectacular house siding colors. No all of the tools used to install this home siding are standard. Special tools aren't needed, and, unlike competitive products, respirators are not required either. See similar questions...

Our sheds normally come with a 5/8th inch pine siding, but if you plan on putting on vinyl or some other type of siding, we can put on OSB siding. OSB (chip board) is a little cheaper and better for vinyl siding. Just let us know when ordering that you plan on putting up your own siding. See similar questions...

Yes. There are two types of vinyl siding. The good stuff and the cheap stuff! Let me explain. The good stuff (premium vinyl) is made from virgin vinyl resins and the color is added before being made into siding panels. This is called (color through formula). Color will not fade. The cheap stuff (reprocessed material) is made from recycled plastic soda bottles, vinyl lawn furniture, pvc garden hoses and all the other stuff we throw out on trash day. See similar questions...