A switch can send packets directly to the computer that's connected to LAN. A router is a combination of a switch and a Network Address Translator (NAT). The NAT function in the router allows sharing a single IP address provided by the ISP with PCs connected directly to the router/switch or switch connected to the router. Basically if you are not planning to share a broadband connection in your network, than an Ethernet switch is efficient enough.

A switch has chips to store MAC addresses of the connected clients. Hubs do not. Therefore a switch can send packets directly to the intended computer based upon the header of the packets. Hub is different, when hub receives packets, it will broadcast packets to all the clients that are connected and that costs traffic. A switch is more efficient than a hub.

Connect any port with an Ethernet cable and into a port on the EZ serial switch and that will expand your network It indicates that your network card is running 100mb Full Duplex. Change the TX rate to 10mb Half Duplex and restart the computer to take effect. A cross-over cable is not needed due to the auto-uplink ability on the EZ serial switch, but will work. Put the EZ serial switch somewhere that has more air flow and see if that solves the problem.

A - A Switch is used to connect few computers together. If you do not need to share Internet Connection and you are building a Network you need a switch. If you have a Network of few computers and you have only one Internet account with one available IP, you can not connect a Switch/Hub directly to the modem. Since you have only one Internet address the Internet signal would know to which computer it belongs.

Yes. Routers and switches will enable you to connect more than one computer to ResNet (up to 8) at the same time. Switches will require a special crossover Ethernet cable (comes with most routers).

A router will enable your computers to share your broadband access. Your computers will need network adapters or wireless NIC cards if you have a laptop. The basic idea behind a broadband router is to allow two or more computers to share a broadband connection and acts as a traffic cop. The router uses a security technology called NAT (network address translation) to mask your computer's address to the world. This ability prevents hackers from accessing your PC remotely.

In order for the computers that are connected to the switch to communicate with each other, each of the computers will need its own IP address. If the switch is connected to routers than you can either set static IP for the computers, or enable DHCP. If you are not connected to a router you will need to set static IP address for all the computers.

A great majority of modems and or pouters will successfully work on the engin network. Generally all relatively new products will be compatible. Our service prides itself on a plug and play setup, it's as easy as that. Please call engin friendly staff on 1300 305 000 to find out if your current setup is compatible.

To start, you will want to install a firewall. The best solution is a hardware based firewall/router such as the Linksys BEFSR41. You can pick one up for around $50 and it comes with a 4 port switch to connect your computers to. By using a hardware based router between your cable or DSL modem and your network, you are able to provide NAT IP addresses on your LAN so that it appears all of your computers are coming from a single IP and it makes it harder to get to those computers.

BaseTX devices to the switch always limit the cable distance to 100 meters (328 ft) as defined by IEEE specification.

Windows Home Server unleashes the power of your existing home network-it allows you to protect, connect, and organize your photos, movies, music, and more. It lets you remotely access your information and your home computers anytime, anywhere, while easily and securely sharing files with friends and family.

Most computer come with an integrated Ethernet card. If your computer does not have one previously installed, you can buy an Ethernet card and RJ45 network cable from the University Bookstore or from most other computer retail stores.

Yes - see this howto for how to configure a linux computer to act as such a router and Bluetooth Support.

Yes, CIS Wireless Broadband does not limit how you connect to and use the CIS Wireless Broadband Access service. However you are not authorized to resell CIS Wireless Broadband services. See the Terms of Service agreement for more details. You are responsible for the security for your computer and Wireless Access Point.

Absolutely! BitWise actually uses two IP addresses, the server's perception of your IP address, and your PC's perception of its IP address. What this means is that the server can identify all the clients that have the same external IP (such as behind a common router), and can then pass that information to the other clients behind that same router. This will allow the clients behind that common router to communicate seamlessly with each other, as well as the other BitWise clients.

No, the EZ serial switch does not have a user configuration interface because there is no need for a user to configure an EZ serial switch to have a LAN/WAN based connection. All the changes should be applied under the Operating System itself.

The router allows you to make a connection between your network and ADSL, so that more than one computer in your LAN can access the Internet. Certain models may give you further options such as security (firewall). A hub is the point of connection for the router and the computer to connect to the network. A switch acts like a hub but allocates an independent bandwidth to each user. This means the data transfer speed will not be decreased by additional users.

We found this value using Airopeek, which is a wireless sniffer. However, you do not have to use this expensive tool. An easier way to measure this number is using the utility we provide with our distribution of MultiNet, called multinethelper.exe. The command multinethelper.exe -getCardSwitchTime gives the time taken by the card to switch to a network.