Yes, our industrial sealers will protect your existing stone work or driveways from harmful elements and provide a luster to bring out the natural look or colors back to life.

Yes, provided you have ample room to allow for the additional 3 inches that will be above the concrete. If this is going into a doorway, you may have a problem with clearance. Also, the concrete should be free of any major cracks. Remember, any movement in the concrete slabs that you are going over will show themselves in the surface of the paving stones. See similar questions...

For a passenger vehicle driveway and footpath a Grade 20 (20 MPa) concrete is usually used. For a more heavy duty application eg truck driveway a Grade 25 (25 MPa) concrete should be used. The following indicates the quantity required of each material to make up to one cubic metre of Grade 20 or Grade 25 concrete. This is a guide only. Less water may be required due to inherent dampness of materials particularly sand. See similar questions...

We recommend using an impregnating sealer to prevent potential stains from spills and other accidents. Using this type of sealer will not change the stone color. The stone surface should be resealed every four to six years. See similar questions...

Paving can be installed over existing concrete or asphalt as long as it is in reasonably good shape. To ensure an adequate foundation for the brick, the existing concrete slab or asphalt should be inspected and repaired as necessary. Any cracks, chips, holes, dips or spalls should be repaired in order to achieve a flat surface. The brick can be installed either with or without mortar. If no mortar is used, a half-inch setting bed of coarse sand should be laid and compacted. See similar questions...

No. Concrete provides a sub-base without flexibility. This may result in the decomposed granite cracking due to expansion and contraction with changes in moisture content and temperature. See similar questions...

A - Yes. Painted or sealed concrete surfaces must be sand blasted or equivalent to exposed clean concrete. Concrete surfaces must be saturated with water to prevent the moisture in the mortar from being absorbed into the surface. This will cause the application mortar to be weak. If proper bonding is in question, wire mesh should be applied to the surface. Gouging the wall with a grinding tool will help the bonding. See similar questions...

Surface deterioration is usually referred to as scaling. Scaling is a local flaking or peeling of the finished, hardened concrete surface, resulting primarily from multiple freeze-thaw cycles. The condition can be aggravated by the presence of deicing materials such as salt. Any product that is intended to melt ice and snow can contribute to scaling. Even products labeled "Safe for Concrete" can contribute to scaling. See similar questions...

Provided the substrate is in good condition, StreetPrint? can be applied as an overlay to existing concrete, asphalt, or stone base. If the existing driveway is asphalt, in good condition, the pavement can be reheated and StreetPrint? can be applied. See similar questions...

The most effective method of protecting your natural stone surface is not sealing. Instead, Majesty Marble and Granite, Inc. applies a stone impregnator, which penetrates the stone and keeps dirt, liquids, and food from easily absorbing into the stone, giving a good window of time for proper clean up. The stone impregnating material does not change the color of the stone, as some sealing materials may. It penetrates the stone and will help prevent staining. See similar questions...

Paving stones can be shoveled and plowed the same as a concrete or asphalt pavement. The chamfered edges around the paving stones help to prevent the edges of the plow from hitting the comers of the stones. A plow with a rubber edge is preferred. Rock salt and calcium chloride will melt snow and ice, but they can also harm the paving stones. See similar questions...

Yes, resurface, repair, level, beautify new or old concrete and or wood designed to resurface pitted, flaked, deteriorated or poorly finished concrete that would otherwise need to be torn out and replaced. Finished applications look as if new concrete was poured, yet offer increased levels of performance including resistance to chemicals, salt, petrochemicals, UV, water resistance and more. See similar questions...

Fortunately there are several drugs available that are very effective at maintaining the current hair that you have and preventing any future hair loss. During your initial consultation we can determine whether you are still actively loosing hair, and if you are; we can determine what medical treatment would be best for you. See similar questions...

That is our responsibility and we do not perform work when it rains. However, because the sealer is an oil-based product, the sealer won't wash off because of the oil properties. Nonetheless, if this happens, we will gladly come out and reseal your driveway at no cost to you if you are not completely satisfied. If the forecast calls for rain, then we will call you and setup another appointment. See similar questions...

Kidney stones can come in many different colors, shapes, textures, and sizes. The color depends on the composition of the stone. Most stones are yellow or brown, however, they can also appear tan, gold or black. The shape of the stone may be round, jagged or branch-like. The stone may be rough or smooth in texture. Finally the size of the stone may vary from specks of sand to pebbles to stones as large as golf balls. See similar questions...

Each type of natural stone has unique characteristics that make them harder, softer or shinier. Depending on your application, there are some design preferences of some type over another. For example, limestone tiles are not suitable for high traffic areas but will be perfect for wall applications. StoneTileDepot.com only carries stone tiles and decorative natural stone products, which are suitable for interior or exterior floors and walls. See similar questions...

Concrete is an inexpensive and durable option, but it will crack. Pavers are more expensive but last longer, provide more of an interest from a design perspective, and are easily repaired if earth shifting occurs. Stone creates a beautiful and natural look but is the most expensive option. Many stone applications can be sandset, which is flexible to ground shifting. Occasionally stone requires a mortar setting, which is less tolerant of ground shifting. See similar questions...

Apply a drop of water at least ½-inch in diameter to the top and the stone and let stand for at least 15 minutes. Cover with a glass to inhibit evaporation. If the stone did not darken then your stone is probably sealed against water-based stains. Testing for oil repellency is not as simple because if your stone is not sealed, you will have an oil stain. See similar questions...

Yes, unsealed concrete will absorb water. Any Water + Traffic + Time = Wear and the disintegration of the concrete starts. As the top surface wears, the aggregates (stones inside of the concrete) begin to expose, chip crack and spalling will start. This effect is most commonly seen on concrete city sidewalks and roads. Sealing the surface is a simple and inexpensive process that will solve this problem. See similar questions...