QueryCAT Logo
Search 5,000,000+ questions and answers.

Frequently Asked Questions

Question: How does AMVIC compare to concrete block or poured wall construction?

FAQ
When cured, the concrete in AMVIC walls is 50% stronger and use 30% less concrete than traditionally poured walls. While the cost of a bare block or poured wall is less, AMVIC provides insulation and furring strips, and is ready to finish, making it a cost effective and less labor-intensive choice. AMVIC also is far less labor intensive to use where there are frequent openings and/or popouts as are frequently the case in residential construction.

Does the dome have specific anchors for concrete versus wood floors?

About Pacific Domes
The brackets that connect the dome to the floor will work on both wooden and concrete floors. When attaching the dome to concrete flooring, you’ll attach the brackets to the boards that surround the concrete slab.

Is the wood in the Touareg real or synthetic?

Volkswagen Touareg Frequently-Asked Questions
All wood surfaces in the Touareg are real. Walnut, Myrtle, and Vavona wood are used depending on the configuration of the specific vehicle. Vavona is the root wood of sequoia trees. Yes. In Xenon-equipped Touaregs, the outer most lights in the Touareg's headlight assembly are high intensity discharge lamps, and are used for the low beam, the high beam, and as the daytime running lamps.

What are the decorative finishes that can be applied to concrete surfaces?

Cement & Concrete FAQs (Frequently Asked Questions) | Po...
Color may be added to concrete by adding pigments-before or after concrete is place-and using white cement rather than conventional gray cement, by using chemical stains, or by exposing colorful aggregates at the surface. Textured finishes can vary from a smooth polish to the roughness of gravel. Geometric patterns can be scored, stamped, rolled, or inlaid into the concrete to resemble stone, brick or tile paving.

How do I mount posts on concrete / decks?

Answers to Frequently Asked Questions - Aluminum Fence Speci...
When you want to mount the fence atop your concrete pool apron, for example, you can use floor flanges on the posts. These are bolted down using lag bolts and anchors which are available at any hardware store. You'll need four 3/8" x 2" bolts per post. It is not unusual to have an angle other than a 90 degree corner. You can use a corner post or a line post, depending on the angle. Basically, anything wider than 90 degrees, use a line post. Less than 90 degrees, use a corner post.

How does it compare in price to other stone choices?

Fernhill Stone - FAQ's
It is difficult to answer this when you are not comparing like with like - it is almost like trying to price a car. Our product is so versatile and quick to apply that it dramatically cuts down the costs of special foundations; time on labour and scaffolding hire, and special sills, roof and guttering overhangs associated with full thickness natural stone.

Q - How does Amvic compare to concrete block or poured wall construction?

ICF FAQ
A - When cured, the concrete in AMVIC walls is 50% stronger and use 30% less concrete than traditionally poured walls. While the cost of a bare block or poured wall is less, AMVIC provides insulation and furring strips, and is ready to finish, making it a cost effective and less labor-intensive choice. AMVIC also is far less labor intensive to use where there are frequent openings and/or popouts as are frequently the case in residential construction.

How does concrete compare to granite on price?

Liquid Stone Studios
If calculated on a square foot basis, our countertops can cost less, the same or more than granite, which is becoming more affordable and readily available to the masses. Just as paintings are not sold by the square foot, we tend to price our countertops per project, not by size, as not all square feet are created equal. More creative and technically complex projects require more complex forms and a more sophisticated mold making process.

HOW LONG DO WOOD DECKS, SHINGLES AND FENCES LAST?

FAQ
When wood is exposed to the elements, its life span depends on the wood species, the degree of decay hazard, the maintenance activities, and the nature of the preservative treatment, if any. Shingles made of naturally durable western red cedar typically last 15-25 years. A well-designed and ventilated cedar deck will have a similar life, as will fence boards.

What type of coating is best for wood decks and fences?

County Decorating - Your One-Stop Decorating Center in Fento...
Most decks are constructed of pressure treated lumber. A penetrating deck stain tends to work best on the horizontal surfaces (flooring) of decks due to constant foot traffic. The vertical surfaces of decks and fences may be stained or painted according to personal preference. Check the porosity of the wood before attempting to stain by sprinkling water on the surface. If the water beads, then the stain will not penetrate the wood.

How does that compare to real cars?

Home of the North American Eagle - World Landspeed Challenge...
The car weighs about 13,500 lb., but instead of the approximately 180 hp V-8 engine under the hood, the North American Eagle™ has 39,000 hp! In the Movie War Wagon with John Wayne, the stage coach Wayne drove would have a tandem set of horses extending 45 miles in front of the vehicle!

How does wood compare to other flooring materials?

Wood flooring manufacturers in India, Parquet Flooring India...
Other floor covering materials simply can't compare to the natural beauty of hardwood flooring. Hardwood floors outperform and outlast almost any other floor covering material. Natural, Renewable and Eco - Friendly, wood floors donot involve quarrying, blasting, mining or heavy chemical processes, and hence are more earth friendly than most other flooring materials

How does the density of polyurethane compare to wood?

Profile Mouldings, Decorative Mouldings, Polyurethane, Flexi...
We manufacture the majority of our products with 6 Lb polyurethane foam typical to that which is used by other major polyurethane suppliers of architectural mouldings. If you were to hammer a nail through one of our mouldings, it would be similar to hammering through a piece of soft pine. The mouldings do come with a white primer coating on them that will provide ultraviolet light protection during installation. Many exterior paints now contain some level of protection from the sun's rays.

How does it compare to other wood stains on the market?

Penofin® Wood Finishes FAQs
Look at Penofin's blotter tests. Penofin wood stains penetrate better than anything on the market. It is the only product with Brazilian Rosewood Oil. Penofin is one of the few products on the market containing transoxide pigments, the colorant developed to give automobiles their tough finish.

Is the decorative overlay cooler to walk on than the concrete?

Texas Elite Concrete Solutions
Because of how the material is produced, the material can dissipate the heat a lot quicker, making the surface cooler.

How does engineered stone countertops compare with natural stone?

FAQ About Ordering Custom Stonework
We're often asked if we see much of the engineered stones and we can honestly say we do--when we're replacing it with natural stone! Do our customers ask us to install it? Very rarely, and when they do we have to send them to the big box stores for a quote because we don't work in it. Today's engineered stones are a blend of crushed quartz (stone) held together by epoxy (plastic). They are a modern-day substitute for corian, popular in the 1970's.

How does concrete effect the environment compared to wood and steel?

Sustainability FAQs | PCA Press Center
Concrete is one of the most inert building materials in use today. It does not rot, burn or rust, providing durability that significantly outlasts many other building materials including wood and steel. The cement industry utilizes industrial byproducts like fly ash and consumes less energy than its competitors. According to the U.S. Department of Energy, U.S. cement production accounts for 0.33 percent of energy consumption—lower production levels than steel production at 1.

Should I use concrete, pavers or stone?

Lifestyle Landscapes: Landscape Design/Build Seattle
Concrete is an inexpensive and durable option, but it will crack. Pavers are more expensive but last longer, provide more of an interest from a design perspective, and are easily repaired if earth shifting occurs. Stone creates a beautiful and natural look but is the most expensive option. Many stone applications can be sandset, which is flexible to ground shifting. Occasionally stone requires a mortar setting, which is less tolerant of ground shifting.
More Questions >>

© Copyright 2007-2012 QueryCAT
About • Webmasters • Contact