Why install air health above the air conditioning coil?
FREQUENTLY ASKED QUESTIONSMoisture collects on the air conditioning coil, creating a damp surface for growth of mold and microorganisms. With the UV bulb over the A/C coil, the bulb will continuously infuse the coil with its rays, successfully disinfecting the air as well as keeping the coil clean.
When I buy a new Air Conditioning Unit, do I need a new indoor coil?
Stolhand Heating and AirconditioningIn most cases yes. If you don't, the life of your Air Conditioner may be shortened, not work properly and it could use more electricity than necessary.
How do I schedule air conditioning for my office?
LSU/OFS: FAQsRequests can be made by telephone, e-mail, or fax (578-5597). Provide the following information: Name, phone number, building and room/s, date and times the a/c needs to be on. A three day notification is required to ensure requests are properly scheduled.
How do I get the schedule changed for my air conditioning?
LSU/OFS: FAQsSend a letter to Facility Services-Energy Services requesting the change. Please include the building and room numbers requiring the change, the requested hours, the reason why the change is requested, and the name of a contact person to discuss the change.
How difficult is it to install a Sterilight UV System?
Frequently Asked QuestionsA Sterilight system requires two water connections and one electrical. Very simple. You can install any of the Sterilight systems either vertically or horizontally HOWEVER there is a right and a wrong way to do this.
Do the apartments have air conditioning? If not, may I install an air conditioner in my apartment?
University of Colorado Housing & Dining Services: Family...The only area of Family Housing with air conditioning is Athens North. If you live in another area, you may install a window air conditioner as long as you cause no damage to the apartment and remove it when vacating the apartment.
Should the coil be cleaned before installing the UV?
E-Z Air Cleaners - Breathe Easy UVC & Media Air CleanersIf there is evidence of mold/mildew such as odors, dark spots, etc than yes clean it. The UV-C light that is emitted works as a biocide. If the coil is dirty when the lights are installed, the UV will kill the mold and then the dead particles will blow through the HVAC system. The lamps should be used to keep the cooling system components clean. Accelerated life tests have been completed to quantify the effect of UV light on plastic materials, including our humidifiers.
Why do you advise that a UV sterilizer be positioned as the final stage in a filtration system?
ECOPURE WATER FILTERS AND DISTILLERS - FAQs (Frequently Aske...UV rays can kill bacteria. However, UV works best in pure water. If water is not adequately filtered, suspended matter in the water will shield some harmful pathogens from the lethal UV rays. Therefore it is best to position a UV sterilizer as the final stage in a filter system. The filter system should be a reverse osmosis (R.O.) system as an R.O. system can filter down to 0.001 micron or smaller, virtually eliminating all suspended particles.
What do we need to install the Anprolene Sterilizer?
Andersen Products: Product NameA one-inch exhaust port and a 110V non-switchable outlet. Everything else is included with the starter kit. ...top>
Where is the best place to install the sterilizer?
Andersen Products: Product NameAny area that can be maintained at 68oF for the full 14-hour sterilization cycle, and away from any source of spark or flame. ...top>
What is a "ton" of air conditioning?
Magic Touch MechanicalThe air conditioning term "ton" equates to 12,000 BTUH (British Thermal Units per Hour). A 3 ton air conditioner is capable of removing a combined sensible and latent (humidity) load of 36,000 BTUH per hour (3 x 12,000).
What is air-conditioning?
FAQAir conditioning is the control of temperature, humidity, air movement, and the quality of air in a room. Basically, we need air conditioned space is to maintain the indoor conditions in comfortable manner and control or improve the conditions of an industrial process so that its quality of the products is enhanced.
