D2_3DFX uses the general brightness settings from your original Descent2 executable. Therefore, in order to adjust the brightness in D2_3DFX, simply run your original Descent2.EXE, adjust the brightness up or down in the Options screen, then re-run D2_3DFX. Also, use the environment variable SST_GAMMA=x.xx (seen above) to adjust the gamma control for your 3DFX card. x.xx should be a number between 0.25 and 1.95.

These are the most commonly-asked questions I've gotten in relation to D2_3DFX on newer computers. It seems that most, if not all, of the issues for V1 and V2 owners were resolved with v1.06b, but it left some problems for owners of more recent video cards. In general, if you're having trouble getting D2_3DFX to run, the first thing you should do is to make sure you have the latest drivers installed and that you have no duplicate drivers sitting around. (Having more than one copy of GLIDE2X.

We keep the number of settings to a minimum, by design. If you like or require lots of settings, we suggest a conventional office suite, such as the fine products from Microsoft, Corel and Sun. This site is different, in that we make most of the formatting decisions for you, and you can't change them. This makes it easy to produce nice work, and difficult to produce ugly work.

On the WX11, there are two adjustment pots under the two rubber plugs located just below the mouthpiece. The one nearest the mouthpiece is the LIP GAIN and the one below that is the WIND GAIN. Of course LIP ZERO is set by the thumb wheel adjustment. And BREATH ZERO is set automatically by the WX11 when it powers up (so don't blow into the WX11 while powering it up). BREATH ZERO can also be set by pushing the WX11's SETUP key at any time. (Be careful not to push the SETUP key while playing.

Enable cookies, session cookies, java script and active scripting from your desk top with Internet Explorer 5.x (IE5) For more browser instructions on earlier versions of Internet Explorer and Netscape, please contact Microsoft or Netscape.

Our DVD Christian Screensaver programs are all self-contained and work immediately when you insert your DVD into your player. For our CD for PCs screensaver version, you can adjust your settings by going to your 'Control Panel' and clicking on your 'Display' icon followed by clicking on your 'Screensaver' button. You can adjust many settings from there to best suit how you want your screensaver to run.

By going to FILE→Print Setup... the printer setup menu allows you to specify which printer you want to print from.

From the second Print dialog (see Figure 2), select your printer from the list (1), and then click on the Preferences button (2). If you are printing a 4x8 card, select the paper type/size to be 4x8 Post-it® Picture Paper", "A5", or "PhotoCard with tab" (See note 3). If you are printing an 8.5x11 project, select the paper type/size to be 8.5x11 Post-it® Picture Paper" or "letter 8.5x11".

In the box that pops up, choose the “Settings….” option. A settings window will appear. Next, click on the microphone icon down at the bottom of the window. Do you see it? It’s third over from the right, just after the folder. This is where you can click on and drag the “Record Volume” to a higher (or lower) level. As you lower the level, you’ll see the meter on the left drop to the green zone.

No. Since a chiropractic adjustment is a specific force, applied in a specific direction to a specific joint, it is virtually impossible to adjust oneself correctly and accurately. It is possible to turn or bend or twist in certain ways to create a "popping" sound that sometimes accompanies a chiropractic adjustment. Unfortunately, this type of joint manipulation is usually counterproductive, often making an already unstable spine even more unstable, and can sometimes be dangerous.

When you publish your scrapblog, you have the option of making it private. This will restrict access to you and anyone you invite to that specific scrapblog. Or you may set it to public, in which case it will be viewable by everybody.

You will get the best results from our site if you set your screen resolution to a minimum of 1024 x 768 pixels. If you require assistance in doing this, please call our support team on +44 (0)20 7456 7049

Yes. The System Blade has an option for Xbox Live Vision that you can go into and adjust the background and lighting of your camera. The camera itself also has a focus ring on it that you can manually adjust the focus of the image with.

IDrive should work with ZoneAlarm and other firewalls without any special setups. In some rare cases, you may need to add 64.14.192.117 or 64.14.192.123 or 64.14.192.235 to trusted IP addresses/hosts.

In the Manage Sites dialog box, either click the New button or select your existing site definition and click the Edit button. In the Site Definition dialog box, you will see two tabs: Basic and Advanced. For the purposes of this FAQ, we will focus on the Advanced tab, since it includes more FTP options than the Basic tab. In the FTP host field, enter the host name of the FTP host to which you upload files for your website.

For now, various stand-alone zoom/focus/pause controls are available on the market. Panasonic made (and discontinued) a particularly small and light version which, if you can find one on e-bay, can be velcro’d to the Merlin handle. If you master one-handed operation, you can also control these functions with the other hand by means of the infrared remotes supplied with many camcorders. Watch this FAQ and the Steadicam.