A/: Dura Seal is the professional division of Minwax which includes a complete line of quality hardwoods floor products such as Stains, Sealers, Polyurethane's, Water Base Finishes, Wood Fillers, Wax's & Floor Cleaners. [top]

Most CERAM-KOTE coatings are considered two component systems. Part A (base) is a ceramic/epoxy solution that is mixed with Part B (curing agent). Please see each individual Product Data Sheet for mixing and application instructions. With extreme care, a two-component kit of CERAM-KOTE may be broken down into smaller quantities. Careful and exact measurements must be made to assure that the proper ratio of Part A to Part B by volume or by weight is maintained. See similar questions...

KLASS KOTE is a protective, decorative, 2-part epoxy coating system. It can be used on a wide variety of substrates and in numerous environments, which require a highly protective and attractive coating. See similar questions...

KLASS KOTE will harden to tack or dust free in 20 minutes to 1 hour. After 4 hours, the film will be thumb print free. After 24 hours, the painted surface/object will be ready to be placed into most normal situations (package able) but complete cure (sword hardness) will generally take several days. In most normal conditions, KLASS KOTE epoxy will be suitably hard within a 24 hour period. Refer to Test Results page. See similar questions...

As CeRam-Kote does not have control of the application of CERAM-KOTE, CeRam-Kote can only guarantee that CERAM-KOTE is manufactured to our strict manufacturing specifications and the testing accomplished to the best of our knowledge is correct. However, it is the responsibility of the end users to determine if CERAM-KOTE will work for them. See similar questions...

Theoretically we have an infinite number of part numbers because we can make belts of any length. To date we have over 10,000 part numbers. That's why it is not practical to show them. Just tell us the description and we'll tell you the part number. Actually all are part numbers are "smart", meaning they describe the belt. The first two digits are the thickness in inches without the decimal point. The next letter is a code for the durometer (a = 83A, 85A or 88A, r = 90A, 92A or 95A). See similar questions...

Dura Runner Plus will not be damaged by water and will absorb it. In addition, the slip resistant backing prevents the water from getting to the surface below. See similar questions...

Slip over footwear to protect against dirt, scuffs and heel marks on carpets and floors, eliminating embarrassing and costly "tracking" mishaps. Easy-to-use and inexpensive, Shoe & Boot Covers will increase customer satisfaction and goodwill. Elastic top holds Shoe & Boot Covers in place and there is a non-slip sole for safety. Ideal for home tours, open houses, job estimates and on-site inspections. Available in two sizes regular and large. See similar questions...

Dura-Bar is a mill. Our focus is on producing the highest quality product on the market as competitively as possible. We have Sales Engineers that work with the customer to provide the full resources of our organization. Our network of distributors are the best at cost effectively stocking and serving a varied range of users, close to the customer. It is rare that one of them cannot meet all the customer’s requirements. See similar questions...

Dura-Bar is distributed across North America through an authorized distributor network. Both national and regional distributors are available to meet your needs. Try our convenient Distributor Locator. How can I get my customers to specify Dura-Bar on their print?Dura-Bar has been used to offer cost savings to a machine shop’s customer. Most companies are looking for ways to cut component cost. See similar questions...

A/: Dura Seal is specifically designed for hardwood floors and for the most part, is primarily sold to professional floor sanders and finishers. [top] A/: Yes this is a two-part question, on gymnasiums that are true sports floors we recommend Gymthane. For multi purpose floors such as stages, dance floor's, museums, Penetrating Gym Treatment is the product recommended. [top] See similar questions...

The Dura-Crib is an injection molded "Lexan" N.A.S.A. plastic product. Lexan is used in bullet-proof glass and astronauts' helmets. The wooden crib is made out of North American white birch and white maple (both hard woods). They are made in America by Americans who receive a fair wage. Yes. Normally, we charge a 35% customization fee. Once the material has been ordered for a Custom Order, Client is responsible for material(s) even if the order is cancelled. See similar questions...

First of all, we are not just a Broker. We do much more than that. Dura Global currently has 20 employees living in China, almost all of whom are native to China. However, our management is American. And not your average Americans either. We speak and understand the Chinese language fluently. We are literally in a league of our own in comparison to our competition. See similar questions...

While it is wet it can be removed with Xylene (Xylol). After drying it can only be removed with a strong paint stripper. See similar questions...

Dried Protecta-kote is non-toxic. Liquid Protecta-kote contains solvent, Xylene (Xylol), and isocyanate. Prevent contact with eyes and skin, do not ingest and avoid inhalation of solvent vapours. Use in a well ventilated area. If spraying Protecta-kote a mask with approved cartridges must be worn. See similar questions...

Approximately 0.5 litre is required for each coat per square metre. For normal use 2 coats is sufficient however 3 coats are recommended for areas of high wear. Therefore depending on the material and technique being used 1litre will cover 1-1.5m2 in normal use and 0.6-0.9m2 for areas of high wear. It is always better to apply many thin coats than few thick coats as this will give better overall cure times and better overall results. See similar questions...

The recommended two coats of Protecta-kote should give you a thickness of 0.83mm (33mils). Where Protecta-kote is being used in high wear situations three coats are recommended giving a thickness of approximately 1.24mm (49mils). These figures will vary slightly depending slightly on the material and technique being employed. See similar questions...

CERAM-KOTE coatings are coatings that utilize various highly modified resins. These resins are then loaded with different types of ceramic particles to achieve the attribute needed, whether that be abrasion, chemical or corrosion resistance. CERAM-KOTE coatings encapsulate surfaces with a ceramic shell that protects the surface from its particular environment. See similar questions...