Separators are tiny blue rubber bands placed between the teeth to make room to fit molar bands needed for some appliances. [Back to top]

Through the use of separators, stacks of documents can be scanned, converted, intelligently named and saved without any user intervention.

Tiles can be laid with readily available plastic spacers, thereby achieving a uniform gap, and the same can be grouted with suitable grouting compounds.

Yes, on all wall and floor tiles. Correct spacing allows movement of the building walls and floors without the tiles cracking or blowing.

You don't. Just leave then in and grout over them. They should be below the surface of the grout and invisible.

Although Outlaw Engineering makes no claim regarding the voiding of factory warranties, most dealers take the stance that if the aftermarket part did not contribute to the cause of the failure, it is a moot point. Outlaw Engineering has literally thousands of ThermoBlok spacers in the field and we have never known of any type of failure related to our product. EVER.

ThermoBlok spacers are completely modular and can be stacked into any thickness of ¼" increments. If you want a hugely thick spacer for your monster motor, please contact us.

When you have fewer sprockets on your cassette, you can make finer adjustments to chainline of your favorite trials gear, and it's a very good thing to have completely straight chainline for your fav. trialsin gear. You can use spacers to move those few wheels left or right to make your chain straight. I hope I don't have to tell your why straight chainline is a good thing. ;-) (few hints: forbidden gears, more power, chain less bent lasts longer, cassette lasts longer etc.

Our wheels are manufactured to mount up with the stock configuration spacers. Your dealer will have spacer kits available, and we highly recommend installing these with your new wheels.

BP] Hub rings were designed to allow a wheel to be "hub centric" which means that when you mount the wheel to the hub the bolts align properly. This is common in today's wheels because it allows wheel manufactures to make one wheel with the same offset and bolt pattern for several cars. The NSX bolt pattern and offset is used in some Honda, Acura, Mitsu, and Toyota applications, but the hub ring makes the wheel set properly on the hub. This is not a bad thing.

A Thousands Separator for numeric values may be specified through Master menu, Customisation, Country Setup. This separator is used to format the output of large numeric values. (Separators may also be entered in most numeric fields. However, to simplify editing, their position is not interactively validated and they are replaced by spaces before the field is saved.

Yes, all pipe beveling machines come with spacers to fit the range of pipe sizes that machine will cut. We also sell step spacers if you are interested.

None. Seriously. Outlaw Engineering does not know of any drawbacks to the use of properly installed ThermoBlok spacers. In addition to power increases, we have received reports of better gas mileage, better sounding induction noise, and longer life of underhood components such as hoses do to reduced temperature to name a few.

A - Spacers will work as long as your steerer tube is long enough. The steerer tube must be inserted at least 1.38 inches (35 mm) into the Thomson stem after the spacers are in place below the stem.

No, however, special consideration must be given to change out differential pressure. The only exception is the HP-style vessels, which should be operated within 15% of design flow.

Using a very low flow, at a distance of not more then 3" (7.62 cm), place the cartridge under a facet or dripping hose and let the water drop (not spray) gently on the element. Continue testing the entire surface of the separator. Areas that do not bead indicate potential failure areas.

Besides the fail safe feature of a monitor (adsorptive element) versus a coalescer/separator (physical separation) some reasons are: Increased flow rates, less expensive elements, no single element test required, no water detection sensor required, adsorptive nature of element design assures dry fuel.

ANSWER: You can use any kind of separators: semicolons, dots, commas, etc. It is OK just to enter a fraction of the entire timecode. For example, if you enter "4.5.2" it will be translated as "00:04:05:02". It is also possible to enter frame numbers and they will be translated into timecode values. For example if you enter "103", this will be translated as "00:00:04:03" (in PAL mode).

Wheel spacers have the opposite effect you are looking for- to get a +50mm offset to a +55mm, you need to remove material. Adding a 5mm spacer to a +50 offset nets you a +45 offset.