Yes. The material has no negative effect on health. It causes no itching or skin irritation. Heat-welded polyester does not release fibres into the air (which is a cause of medical concern). This is one reason why many hospitals and buildings with air-conditioning systems choose NOVAtherm and NOVAhush.

Simply Spray will work on silk, but it will not have the same affect as it will on cotton. Simply Spray will run on silk or polyester, leaving a more tie-dyed look. So, yes, it will work, but won't be as controllable as it is on 100% cotton.

Use no more than a ratio of 10% by volume of the Styrene Monomer for thinning, as higher concentrations will degrade the resin's properties. Do NOT use with epoxy.

There are many resources within this site to help you make a choice. In particular please explore the Product Information section for numerous relevant pdfs.

Polyester is man-made and the properties can be changed. Many articles of clothing now include polyester. Fleece jackets keep you warm, raincoats repel water and wicking polyester that absorbs moisture. The threads of the polyester used for Coolfemme products have been restructured to make them wick or draw moisture away from your skin see our fabric page.

The difference is primarily the thermal and chemical compatibility. Traditionally the polyester is used on steel ring bags and polypropylene on the plastic flange. Our 100% polypropylene filter bag is manufactured from FDA compliant material for food grade applications. back to top) Why does my filter bag seem longer than my support basket? Filter bags are basically a two dimensional flat tube with a collar. It must fill up void spaces of a three dimensional support basket.

Unsaturated polyester resins are normally dissolved in styrene monomer and are able to give films with high-build since the styrene reacts with the polyester base in the presence of a peroxide and a cobalt initiator. This reaction is due to the formation of free radicals which react on c=c bonds. High-build pigmented finishes based on these resins find use in applications such as finishes for kitchen furniture. Pigment selection must take into account reaction with peroxide.

Polyester labels are sometimes referred to Mylar and Fantastock labels. Polyester is more durable than polypropylene. Polyester labels can withstand higher temperatures and also has superior abrasion resistance when compared to polypropylene. Polyester labels are available in White and Silver Gloss finishes. Most polyester labels such as our Fantastock, are UL recognized when used with an approved UL recognized Resin ribbon such as Sony's TR4070 Resin Ribbon.

far as shirts is concerned, cotton is king. Is natural, is smooth and silky to the skin, breathes the best and highlights colors. A quality shirt, tie or suit can't have polyester in them.

Polyester rope is bright white where as cotton rope is more of a beige color. Polyester rope will last longer outdoors then cotton rope. Some people say that cotton rope is more comfortable then polyester. This is largely a matter of opinion.

We prefer not to, given that 100% cotton is not only preferred by most consumers but also a heck of a lot easier to work with. Dyes used on polyester shirts have a nasty habit of sneaking into inks, which requires the use of special inks that are both more expensive and harder to use. But, if a client needs polyester shirts printed, we can do it. Yes, we print them, they cost a little more than regular shirts (though not too much more), and a wide number of colors and brands are available.

No. The high-grade polyester we use is virtually unaffected by sunlight. That is why it is used for seat belts, cargo straps, parachute harness and other safety applications. Over time, the Braid™will yellow slightly but this will not reduce its strength. An independent laboratory subjected ElectroBraid? to a standard ASTM test for extreme ultra violet (UV) radiation and there was no product deterioration.

Lycra (Spandex) is softer and has greater stretch capability allowing for more flexibility. Its fabric has a rubberized elastic material. This is especially important for Synchro Swimmers. However due to the rubberized elastic material Lycra tends to breakdown earlier than Polyester because the chlorine attacks the rubberized elastic material in the fabric.

Polyester is a man-made fabric which results in a garment which is extremely light and comfortable to wear, with excellent quick drying and chlorine resistant properties. Polycotton is a more natural fabric and feels more like the t-shirts that you put on your children. This is ideal for infant or sensitive skins, but takes a little longer to dry than polyester. Both fabrics achieve the same SPF of 50+ and fit in the same way.

Nitrate Base/Triacetate (Safety) Base Early motion pictures were all shot and printed on nitrate-base film. This became extremely flammable as it aged, and thus unsuitable for use in non-fireproofed environments (such as homes and schools). Thus, 'safety film' was invented, which had a biacetate (later, triacetate), or similar, base.

a) Acetate: Acetate provides excellent drapability and softness, and is moth resistant. Acetate is dry-clean only. b) Polyester: Polyester is strong; moth resistant; resistant to stretching, most chemicals, and abrasion; is crisp and resilient when wet or dry; retains heat-set pleats and creases; is more wrinkle resistant than Acetate; and is easily washed in ordinary washers and dryers.

Permanent damage can result if a resin system is used in any kind of a paint sprayer. However, TAP sells the perfect answer, a GelCoat and Resin Spray Cup Gun.

Polyester has been shown to be much more resistant to UV damage and abrasion than nylon fabrics. Polyester also has better structural integrity - it doesn't stretch or sag when wet from rain, snow or dew, which means the inner tent stays protected and dry.

Yes, with Procion MX dyes, but the polyester part of the fabric will not take dye and you will get a much lighter, "heathered" effect.

We are often asked this question from clients in the home furnishing industry as they often require to sublimate onto furniture with fabric that is part polyester and cotton. Generally speaking, the higher the percentage of polyester in the fabric the better the sublimation results. At minimum we recommend a blend of 60% polyester - or in other words the majority of the fabric should include polyester.