A9. Our old boat " Seas the Day " was a single engine 8,000 pound boat that went about 25 knots. It burned about 15 gallons an hour at this cruising speed. Bigger dual engine boats range 20-40 gallons an hour. The Nordhavn 43 is about 55,000 pounds. Yet because of its design and slower speed, it consumes only about 2.5 gallons per hour. Slowing down burns as little as 1.8, speeding up can burn 3+. Said another way, we get about 2.5 to 3.

oil - also referred to as Bunker C. To atomize (see next question) properly, the fuel must be kept hot, so steam pipes are routed through the fuel tank in the tender to keep it at 130 degrees F. 1522 did not always burn oil - she was originally built as a coal burner but only stayed that way for a year before being converted. Wood, while burned on real old steam locomotives, does not put out the heat needed to operate larger locomotives like the 1522.

The stove can burn most any fuel: methanol, anhydrous isopropyl alcohol, Coleman white gas, gasoline, kerosine, etc... It has, however, only been tested with methanol and anhydrous isopropyl alcohol. Take appropriate precautions when testing out your stove with new fuels (test outside away from building, etc...). See the disclaimer at the bottom of this page. Methanol can be purchased in at your local hardware store in the paint / solvent section of the store.

Yes! The big difference is that wet fuel may take 80% more air than dry fuel. Operationally, you may wish to meter the wet and dry fuel to create a consistent fuel blend or you may want to exhaust the least merchantable fuel before using a more valuable fuel. With the controls designed for this scenario, this can easily be accomplished. In general, any time there are continuous variations in fuel quality, it is desirable to have an operator near by the steam plant.

The Luminarium Outdoor Hearth was designed and built strictly for use with Fire Designs Hearth Fuel. Burning anything other than Hearth Fuel could cause damage to the unit or your property and would void the warranty.

Make sure to use reliable, quality media (discs) that are supported by your drive (see the online media support list for your drive); Make sure to use only 1 burning application in your PC; more than 1 burning application may conflict with each other by trying to simultaneously access the drive; If you have taken the above measures and are still experiencing problems, then please send an e-mail to the technical support person that is responsible for your region.

The frequency of asymptomatic shedding parallels that of symptomatic outbreaks. There is little asymptomatic shedding in people with genital herpes due to HSV-1 (and therefore not much risk of transmitting herpes to their partners). For genital herpes due to HSV-2, every infected person sheds virus without symptoms from time to time. Just as symptomatic outbreaks are most common in the first months or years after catching the infection, asymptomatic shedding is most frequent in the first year.

Both will burn less at slower speeds and Moonglow will use more fuel (as all boats do) at higher speeds. Both vessels are powered by diesel engines.

No test can accurately predict fuel economy for all drivers and all driving conditions. Driver behavior, driving conditions, vehicle maintenance, fuel characteristics, weather, and other factors can all affect fuel economy significantly as explained here.

The fuel is poured into the hole in the center of the stove. Take care not to get any fuel on the outside of the stove or overfill the stove. If there is fuel on the outside of the stove walls when the stove is lit, a person runs the chance of the stove bursting into flame. The stove should not be filled any higher than 1/4 inch from the rim.

A9: Social Skill Builder software products are designed to facilitate learning while providing opportunities to pause and discuss information, to replay scenarios for greater recall and understanding, and to engage in exercises that help the child carry learned skills into everyday life. Each program highlights video scenarios of real children interacting in social scenarios and then the user has the ability to choose what should be said or done next.

No. The Soft Touch Laser is a patented low level laser cosmetic. The Soft Touch Laser is non-evasive which means it does NOT cut or damage the skin. use is extremely comfortable and safe.

Of course everyone is different, but there have been people who say they do burn up to 1,000 calories an hour doing Zumba. It will depend on several things including age, weight, and the level of intensity you put forth during your Zumba workout, but it is possible! On average, most people will burn anywhere between 600 – 800 calories.

It is true that PowerCard only adds fuel. We designed it that way to keep it simple and affordable. Our belief is that in almost every situation, addition of fuel is what modern fuel injected vehicles need. In order to meet stringent emission standards, fuel systems are mapped by the factory to be lean in cruise and everyday driving conditions.

No, diesel fuel is not approved for the M601 engines. Use of a un-recommended fuels may cause serious damages to the Fuel Control Unit seals which could result in fuel control problems and loss of power in-flight.

NJCN services are billed by the hour. This pricing option is most relevant for smaller, less time consuming, services. For example, if one of your servers or desktops is experiencing a problem (i.e. it does not boot, or showing an error message). (Pricing by the hour ranges between $35 to $125 per hour depending on the type of support required: i.e. remote VPN support, Telephone support, onsite visit, emergency onsite support.)

Answer: The amount listed on RealtyTrac is usually based on the defaulted lien amount or the transfer value. Called the Balance or Opening Bid on RealtyTrac, the defaulted lien amount is what the foreclosing lender needs to break even. If our data sources don't provide that amount, then we use the Trans Value, which is the amount paid for the property when it was purchased by the owner in default.

A9: In early shared-memory models, parallel directives were only permitted within the lexical extent of parallel regions. To the application programmer, this meant that the directives had to be defined in such a way that all information needed to parallelize a loop or subroutine had to be specified within the source for that loop or subroutine.

Review Cure - Submission was either late or a cure to a deficient submission was submitted and is under review at HUD. No action required. Deficient - Lender needs to address deficiencies in submission via LASS. Lenders can review the deficiencies by accessing "Reports" and clicking on "Lender Deficiency Report". Action required: Submit cure to HUD. Insufficient Cure - Lender needs to address deficiencies in submission via LASS.