You can test the air in your home inexpensively with our home mold test kit to determine if you have a mold problem. If the test indicates a problem, then a mold inspection is recommend. If the test doesn't indicate a problem, then you have successfully eliminated mold as a potential source of the problem.

Syrup that is improperly packed will mold, sour, or ferment. Syrup must be packed at 180oF and at a minimum of 66 Brix to avoid spoilage.

Molds are part of the natural environment. Outdoors, molds play a part in nature by breaking down dead organic matter such as fallen leaves and dead trees, but indoors, mold growth should be avoided. Molds reproduce by means of tiny spores; the spores are invisible to the naked eye and float through outdoor and indoor air. Mold may begin growing indoors when mold spores land on surfaces that are wet. There are many types of mold, and none of them will grow without water or moisture.

This musty smell is a sign of dampness, even if your basement doesn't seem to have a problem with leaks. This smell is caused by mold growth in damp areas and fungus spores in the air, and this can contribute to health problems such as allergies and asthma. Aquaseal's basement waterproofing products will seal the walls and floor of your basement and make the air healthy and fresh again.

Obviously, the musty smell you have is much more than just a bad smell. Mold and fungus spores that float in the air cause it. This will contribute to allergy and asthma problems, as well as other health issues. Click HERE to Read a Report by Everette L. Herndon, Jr. and Chin S. Yang on the effects of mold, mildew, and musty smells in a home.

Spray AOT Aerosol Odor Terminator? in the air intakes under the hood. This should kill any odor causing bacteria inside your air vents.

The musty odors produced by molds are known by scientists as Microbial Volatile Organic Compounds. Some MVOCs produce musty and moldy odors, which result form the chemical changes taking place during the mold life process. They are waste products given off by actively growing molds. Health effects such as headaches, dizziness and nausea have been linked to exposure to MVOC’s , but research is only beginning.

Water may have an undesirable taste or smell if it has been stagnant in household plumbing too long. A 3 X 7 flush should alleviate the taste and odor issues. Should the undesirable properties persist, decide if a particular faucet is at fault. Sometimes point of use equipment, water softeners, water heaters, or in-line filters, can be the cause of strange tastes or smells.

Sometimes, strange tastes or smells in water can be caused by it sitting in the water main for too long. This can be a particular problem near the end of lines. One solution to this problem is to have the water flushed from your main. If you think that your water main needs flushed please call customer service at 765-482-5100.

Mold growth in foods can raise the pH of the food. In home canned products, this could mean that the high acid products could become low acid and therefore run the risk of botulism or other bacterial spoilage. Thus, any home canned product that shows signs of mold growth should be discarded. The exception to this is jellied products. In these the high sugar content would prevent the growth of Clostridium botulinum.

If moisture remains in any material in the basement -- contents such as cardboard boxes, wall studs, concrete, etc. -- then mold will continue to grow and produce the volatile organics comprising 'mold odor'. If, in addition to the flood, moisture is entering slowly through the foundation or floor, then the condition will be chronic unless you stop it, say, by sealing the concrete. And you can't go wrong with a dehumidifier.

Generally, it is not necessary to identify the species of mold growing in a residence. Current evidence indicates that allergies are the type of diseases most often associated with molds. Since the susceptibility of individuals can vary greatly either because of the amount of mold or type of mold, sampling and culturing are not reliable in determining the health risk.

If you are interested in experimenting with one or more of the most likely candidate bioenergy species in your area, you can start by gaining some working knowledge of growth characteristics and management responses under local conditions - this will be useful if a later opportunity for commercial production and sale of biomass occurs in your area.

PBR provides air sampling services to help you determine the presence and sources of mold in your air, heating ducts, etc..

The most important step in solving a mold problem is to identify and fix the moisture sources that caused the mold growth. For small mold problems, use detergent and water to wash mold off hard surfaces and dry completely. Porous or absorbent materials (such as ceiling tiles, wallboard and carpeting) that become moldy should be replaced. If you do not see mold growth, but notice a musty odor, mold may be growing behind water-damaged materials, such as walls, carpeting or wallpaper.

In wetter climates, you may find that mold will grow in your cooker if you don't use it that often. First, how to get rid of it? Light up a hot fire in the cooker and let it just burn all the mold away. Second, how to prevent it? Well, any technique that can be used to prevent moisture from getting into the cooker will help: If it is a real problem, try this: After you are done cooking, let the cooker heat up for about 20 minutes after you remove the food.

Prevent mold with moisture control. When anything in your home gets wet, dry it quickly. Mold can grow within 2 days of continuous moisture. Fix leaks in the roof; even the smallest opening in the roof, wall or foundation can permit water to enter your home, especially during heavy rain. Also use water-sealant paint on basement floors and walls. The exterior basement walls should also be treated.

Molds are a part of our environment. They play a part in nature by breaking down dead organic matter. However, indoor mold growth should be avoided. Mold may begin growing indoors when mold spores land on surfaces that are wet. To avoid mold problems, it is essential to eliminate unnecessary moisture. If a surface gets wet, dry it immediately.

Fully dry wet building materials furnishings and carpets within 48 hours of getting wet, if possible. Make sure that heating/ventilation/air conditioning (HVAC) systems are always running, to keep the right amount of air flowing inside of the building. Keep indoor relative air humidity below 60% (ideally, between 30% and 50%). Good airflow and dehumidifiers help to keep humidity low. Make sure that stoves/ovens, bathroons, and clothes dryers are vented to the outside of the home, if possible.