Yes, the OneTouch USB Cable can be used with a hub, rather than connected directly into a port on the computer. With the 9-pin serial cable, just plug it into your meter and the serial port (COM port) of your computer. You may need to restart your computer if another device had been using the serial port. With the OneTouch USB Cable, you must install a software driver before using it for the first time.

Both provide equivalent communication for all our meters. The distinction is that each kind of cable is intended for a different kind of connector to the computer. Some newer computers do not provide serial ports, which is why we introduced the USB version of the OneTouch Interface Cable in 2004. See similar questions...

No. Although the OneTouch USB Cable was more recently introduced, it is not considered an upgrade from the serial cable. Rather, it is a distinct product. The two types of cables are equivalent in quality. See similar questions...

Version 1.0 of the driver should be uninstalled from the same CD used to install it. Insert the CD and search on it for a folder named "Uninstall." Open the folder and double-click on the file named DRemover.exe. Follow the instructions as prompted. (If you have misplaced your CD, contact LifeScan's Data Management Line at 800 382-7226; we can send a replacement CD or walk you through the process of doing a manual uninstall, if you prefer). If you installed Version 2. See similar questions...

USB” is short for “Universal Serial Bus.” A single USB port can be used to connect up to 127 peripheral devices, such as mice, modems, and keyboards. USB also supports plug-and-play installation and hot plugging. Originally, the OneTouch Interface Cable was available only in a 9-pin serial version. Some newer computers are produced with only USB ports, which is why LifeScan introduced a USB cable in 2004. See similar questions...

No. The OneTouch USB Cable is not compatible with IN TOUCH® Software, which is no longer distributed. Only the OneTouch Serial Cable is compatible with IN TOUCH. See similar questions...

The light does not come on when the card reader is plugged into the computer. It will only come on when a memory card is inserted into the reader. See similar questions...

No, the USB port will support only one user. If you need to support multiple computers you need to use the Ethernet port and a hub/switch. See similar questions...

A USB hub typically consists of a single upstream port (designed to connect directly to your computer or to another hub) and multiple downstream ports. D-Link provides both 4-port (DSB-H4) and 7-port (DSB-7) models. It allows you to expand the number of devices you can attach to your computer. See similar questions...

Good question. According to the USB spec, software is required to connect not only to first tier devices, but also to any plugged into USB hubs. It appears that there is a bug in the Kodak Mounter and USB connection software causing it to fail unless the camera is "device #0", connected directly to the computer. See similar questions...

No. The Hitch will recognize the hub connect to the first device it finds on the USB hub. If that device is unplugged from the hub, the Hitch will then search for another device connected to that hub, but will never connect to more than two devices at once. No. The Hitch is a bridge device, and contains no memory. This is an advantage because it cannot have any issues with storage, such as hard-disk failures or memory allocation errors. No. See similar questions...

Yes, the CB-USB4 cable that comes packaged with the camera is required to connect the camera to the computer. The stock number for a replacement cable is 200 776. It can be purchased through the Olympus Emporium or 1-800-201-7766. See similar questions...

If the distance between USB slots of your PC/notebook is too far for USB Y-cable to connect, you can only connect prime head of USB Y-cable, as indicated below, to one USB slot of your PC/notebook; and then connect the other USB slot of your PC/notebook with DC-inlet cable's USB head to supply power. Therefore, the power supply head of USB Y-cable is useless. See similar questions...

Yes, as long as the hub uses an external power supply. We do not recommend or support this configuration. Before requesting help from Technical Support, please try connecting the device directly to the computer's USB port. See similar questions...

Please make sure the USB cable is made by Fortuna, and please download USB driver and firmware upgrade instruction from GPSmart download page for you to install the USB cable. See similar questions...

Yes, you can connect the player directly to your computer using an Ethernet crossover cable. You can purchase a crossover cable at most retail computer stores. Once you have this connection, you'll need to set up your network adaptor and Squeezebox with static IP addresses so that they can find each other. See similar questions...

A hub is a network device that extends the network so that you could connect more than one computer to the network jack. A network hub can be borrowed from the ITS department. Verify if your hub has a button called Normal/uplink near the rightmost end. It is not necessary that your hub should have the Normal/uplink button. If you see the button, make sure you press the button inwards to set it to uplink. See similar questions...

Yes- The phone should work properly when plugged into a USB hub. If experiencing problems with a vPhone using a USB hub, plug the vPhone directly into the computers USB port. See similar questions...

This special cable is required to transfer data from your meter to your computer. Two types of OneTouch Interface Cables are available: A 9-pin serial cable and a USB (Universal Serial Bus) cable. Each works with a different connector on a computer. Our cables are approximately 6 feet long. A OneTouch Interface Cable can be ordered online or through the mail. See similar questions...