The AGRO-JET® (MIT-III) weighs about 2.2 lbs and is ergonomically designed for comfort and ease of operation.

The AGRO-JET® was invented in Canada by MIT (Medical International Technologies (MIT Canada) Inc.), based in Montreal, Quebec. The delivery system is a patented design held by MIT and the only system in the world that delivers low-pressure injections at adjustable levels utilizing readily available sources of vaccine and propellant. The AGRO-JET® continues to be manufactured in Canada by MIT and is marketed throughout the world.

Flushing the unit with de-mineralized water after each session will minimize or eliminate any risk of plugging. If an orifice ever becomes plugged, the operator can usually remove the blockage within just a few minutes. Relieve any pressure by turning off the CO2 supply and holding down the trigger for 5 seconds to release the gas. Remove the skin stretcher and orifice from the barrel (retainer nut is hand-tight - no tools are required) and inspect closely.

Cysts and abscesses are caused by tissue damage inflicted by the needle at point of entry. The AGRO-JET® eliminates the occurrence of abscesses and cysts with little or no trauma to tissue. Its patented process delivers any vaccine or medication in a fine jet at low-pressure thus providing safe and painless entry with little or no trauma to the tissue at point of entry.

Carbon Dioxide (CO2) powers the AGRO-JET®. CO2 is a non-flammable liquid gas that can be safely stored at high pressure and is readily available in a variety of cylinder sizes. The cylinder supplied with the unit will power the AGRO-JET® through several hundred injections. No, only the medication passes through the skin; the CO2 simply powers the internal mechanism of the AGRO-JET®.

The AGRO-JET®'s human counterpart is called the "MED-JET®" and is approved by Health Canada for use on humans. Indeed, the MED-JET® is used in Quebec each year to give the "Flu shot".

To the contrary, it is simplicity itself. Operators become fully familiar and comfortable with the AGRO-JET® within the first hour or two of use.

The AGRO-JET® is a state of the art, technological breakthrough that is poised to revolutionize mass-immunization and animal treatment programs. Many veterinarians and farm operators are not yet aware of its existence. That is about to change!

The AGRO-JET® is safe, quick and extremely accurate. Virtually painless, animals will no longer suffer from needle-stick trauma, cysts or abscesses. Concerns regarding cross-contamination are eliminated as are any risks associated with broken needles and needle fragment contamination of carcasses. Needle-stick injuries to operators and handlers during and after injection are a thing of the past.

sq. inch of "foundry" type weighs 4.179 oz. (+/-) or 118.5gm This by weighing unused 18pt ATF Baskerville M's. Therefore, there is 3.828 sq. inches of printing surface/lb. of foundry type. Or 8.438 sq. inches of printing surface/kilo of foundry type. (This allows you to visualize how much type you get when looking at the price per pound or kilo) The weight of monotype is usually less as the castings are less dense, but it's probably fractional. Michael Babcock

The 442 mixer weigh 4.24 pounds. We were very conscious of weight in our design, however, the two significant factors that add weight to a field mixer could not be compromised - transformers and chassis durability. The transformers are the bulk of the circuitry weight - there are four input transformers and two output transformers. For the mechanicals we chose 6062 aluminum for the faceplate and 5051 aluminum for the overall chassis.

Your AGRO-JET® will come with either a 5 lb or 2.5 lb CO2 cylinder; the weight referring to the amount of CO2 that can be compressed into the cylinder. The larger cylinder weighs approximately 20 lbs at full capacity; the lesser about 10 lbs. Both cylinders come complete with their own back-pack style vest allowing for a very comfortable carry; so much so that it's easy to forget it's even there!

Met-Tile weighs only 125 lb per square or 1.25 lb per square foot. Concrete and clay tiles can weigh up to 10 times as much. This means you can reroof with Met-Tile with no need for costly truss reinforcement. And it's safer than heavy tiles in earthquakes or hurricanes.

This is sometimes stated within the auction. If it's not stated, we recommend you search for the information on Google, simply by entering the laptop name and the word weight. Example: "IBM T20 Weight".

Information on Wisconsin state fishing records is contained on our Record Fish page. You can compare your fish to our established records, and if you think you have caught a record fish, there is an application available on that page.

Because of the type of alloy we use, the weight of the car is only slightly higher than that of simialr cars produced purely from plastic! The dry weight of the T3 is approximately 8Kg.

SEECO current and voltage sensors are extremely light weight and typically weigh less than 10% of comparable oil-filled instrument transformers. This favorable weight differential allows the use of SEECO sensors in transmission applications where pole mounted oil-filled instrument transformers are simply impractical.

A light, modern, racing sled weighs around 40 lbs. Mushers also carry an additional 100 pounds of mandatory food, supplies, clothing, lines, repair kit, etc. Depending on the size of the musher this brings the total weight of the sled to 300-400 pounds.

Standard thickness slate weighs approximately 800 to 1,000 pounds per square installed. (A square is a 10 foot by 10 foot area.) 3/8" slate weighs approximately 1,500 pounds per square. Every 1/8" of additional thickness increases the weight by approximately 500 pounds per square.