Typically, LNBs are bolted to the feedhorn. You would need to unbolt the old LNB and connect the new one using your old bolts or ones that are provided. It is a good idea to use coax cable seal after you install the new LNB. On an older system the new LNB may not fit on your feedhorn. Older LNBs were larger and to fit them under the feedhorn cover a 90 degree elbow was installed to lay the LNB flat. If you remove this 90 degree elbow your new LNB will bolt directly to the feedhorn.

The Monoblock LNB (for Astra 19.2 degrees east and Eutelsat Hot Bird at 13 degrees east) has the degree separation already pre-built. The Eutelsat feed should be the prime focus aligned LNB (as per the diagram). Our Monoblock LNBs have DiSEqC (automatic LNB switching) in-built, therefore no additional DiSEqC switching equipment is required. See similar questions...

Older LNBs, designed to work with analog video carriers often have the phase-noise specification out of tolerance for digital satellite applications. The DVB standard uses QPSK modulation/demodulation. The “p” in QPSK is for “phase”. New LNBs are available along with splitters and other items are also available on the order form. The minimum LNB specification follows in this FAQ. See similar questions...

Once you have downloaded a new module as a .wbm file, enter the Webmin Configuration module and click on the Webmin Modules button. Then use the form at the top of the page to install the module either from the local filesystem of the server Webmin is running on, or uploaded from the client your browser is on. See similar questions...

Just click on the "Download" button under the Theme you like and select "Open with..." option. The Theme will be automatically saved and applied to your Desktop. the Theme designer might have used some third party applications, like Rainlendar, Rainmeter, Sysmetrix or Kapsules. See similar questions...

For Desktop plug-ins (*.PLG) go to Start>Aston Setup (or press Ctrl+Alt+F12), then to Plug-ins>Add and select the necessary plug-in (you might need to extract it from the archive first). Flash is quite a resource heavy application, which doesn't fit the principle of Aston being lightweight. In most cases ANK files give you as much power for creating complex animation effects as Flash. See similar questions...

Most manufacturers have their own molds for the LNB case. They will have anywhere from 4 to 8 holes. It is not necessary to have a bolt in each hole. As long as you can get one bolt to secure on opposite sides, your LNB should work fine, although putting a bolt in each hole that lines up will give you some insurance against moisture. See similar questions...

Make sure you have a current data backup. Make sure no Pocket PC's are connected to a cradle or other connection. All users much be logged off. Once downloaded to the server, browse to its C:\Program Files\Chirosoft folder. Double-click on SetupEMRDatacenter.exe to launch its installation and take the default choices until you have clicked "Finish". Next, double-click on SetupMyEMRWin.exe to launch its installation and take the default choices until you have clicked "Finish". See similar questions...

Thanks to Ilya Zakharevich <ilya@math.ohio-state.edu> for pointing out that perl code comes in a variety of flavors and some code requires more work than others to install. Hence I have expanded this topic and will refer to three distinct categories here: Scripts Modules and Extensions:) Scripts A "self-contained" script needs little modification (in principle!) to run. It is a good idea to check the #! line at the very top of the file to reflect your local perl setup (e.g. See similar questions...

Depending on your service package, we do include an hour of standard service administration with your server and can add or even upgrade hardware in most cases. However, due to the wide range of software products available, you will need to remotely install any software to ensure proper licensing restrictions. We will be happy to assist where available. See similar questions...

Yes and No... This really depends on how handy you are and how complicated the installation is. While we have designed our systems to be plug & play, the actual running of the cables is the part you might want help with. To make the installation look as good as possible and to make the wires as hidden as possible a professional installer may be your best option. iWATCHLiVE.COM does complete professional installations in South Florida. See similar questions...

A Dual LNB is just two LNB's...each connection can operate independently of each other so you can have two receivers each looking at different stations on different transponders. They both look at the same satellite (101 Degree satellite). A single LNB only has one coax connection and cannot be used with more than 1 DirectTV receiver. See similar questions...

You can check whether your LNB is digital or not by looking at the frequency range, which is usually written on the LNB. When your LNB is digital this frequency range goes up to 12.75 GHz. If it is analogue this frequency range only goes up to 11.75 GHz. See similar questions...

The DSR is the Digital Satellite Receiver. It receives the digital signal from the dish and processes it into a video signal. The LNB is the Low Noise Block converter. It converts the incoming satellite wave to electrical signals. See similar questions...

A Barker Field will continue to be Valley View's stadium, even if the district has new buildings in the future. Barker's grass field needs to be restored next year (this is a periodic expense that has always been covered by the Athletic Boosters and other community partners). Instead of restoring the grass field again, the Boosters are leading a community effort to replace the grass with synthetic turf, which is a better value and safer for student athletes. See similar questions...

This is the easiest, yet most important step - call customers. Eliminate any company that doesn't give you a long list of customers that they have installed during the last 1 to 24 months. Call a few customers at random and tell them you are considering a new system and ask about their experience with McCullough (or any other company you are considering). [ back to top ] See similar questions...