The input sensitivity setting is a function of amplifier gain. You will want to match it with the output level of whatever is before the amp in the audio chain (i.e. preamps, mixers). For amplifiers with a 0.775V position, this positions corresponds to a 0 dBu level. The 1.4V position corresponds to a +4 dBu level. The 26 dB position is a fixed gain position. The 26 dB position is also the lowest gain position, and will usually work well with output levels of +10 dBu (2.5Vrms and above).

This website is designed for use with Netscape 5 (or higher), Internet Explorer 6 (or higher) and Firefox browsers, both on Macintoshs and PCs. However, since every browser displays the information provided a little bit differently, we do have preferences, and recommend Firefox. With Mozilla's Firefox browser you can use the keyboard to navigate through the quizzes with ease and speed.

There isn't such thing as a "perfect" dwell setting (if there were then it wouldn't be adjustable). Every marker operates a little differently and every marker requires a bit of tuning to perform well. Instructions for this and other tasks can be found on this website under the Adjusting & Maintaining pages.

Is there a drawback to high sensitity? Yes. The high sensitivity setting will tag more valid email as spam. ZiaNet recommends that if you decide to use the high sensitivity setting that you also set up a well thought out whitelist.

Begin by researching the discipline. There are books and organizations that rate programs within each discipline and provide information about each program's admissions standards. For example, the most competitive programs in some disciplines have acceptance rates as low as 2%. Other very fine programs in the field may admit up to 25% of applicants. (Program size will play a large role in this.

Sensitivity refers to the response of a piezoelectric material to an applied electrical or mechanical stimulus. The dij and gij constants represent sensitivity. dij is the charge constant, which represents strain per applied electric field (m/V) or polarization per applied stress (C/N) gij is the voltage constant, which represents the electric field produced by an applied stress (Vm/N) or the strain produced by electric displacement (m2/C).

Some people are sensitive to sulfites, preservatives found in wine, beer and some prepared foods, especially dried fruits. Reactions in a small number of people include severe asthma attacks and breathing difficulties. Sulfite sensitivity, however, is not considered an allergy.

In theory, yes, but only by changing certain resistor values, which requires opening the covers and exposure to dangerous voltages. This should be done only by qualified service personnel, or under the guidance of QSC Technical Services.

The sensitivity adjustment actually changes the level of an input filter; Switching the unit to "Low" sensitivity range filters all input signals up to 1 Volt peak amplitude. "High" sensitivity range blocks input signals of up to 10 Volt peak amplitude. The sensitivity potentiometer allows fine adjustment of the filter threshold within the chosen range. The purpose of the input filter is to block low-level electrical noise from the input of the device.

This is an excellent question. Let's step back a second and think about a typical mid to large size application. If we start from the back end and work toward the view we have: Database: Most modern databases are going to validate for required fields, duplicate records, security constraints, etc. Business Logic: Here you are going to check for valid data relationships and things that make sense for the particular problem you are triing to solve.

When starting the game with one peasant only, full speed is best for a short while. After three or four buildings are completed, it is best to slow the game to one notch below that. This makes units more responsive, so it is possible to cast spells, react to attacks, and so forth. If the lag in a game is particularly bad, the speed should be slowed to about the midpoint to reduce the effect of the lag. Note that lag is caused almost entirely by network and modem performance.

There is no single best adjustment setting for your KONI shocks because every driver and vehicle has different preferences for comfort, performance, performance modifications and roads to drive on. For most vehicles, we suggest that new KONI's be installed in the full soft position (the standard setting right out of the box) to take advantage of the balance of ride comfort and handling designed by the KONI ride development engineers.

ADFSBuffers are Read Ahead and Write Behind buffers for ADFS on your Archimedes. These are designed to improve the speed of filing operations by doing work at optimum times. There are some side effects of using them though. When active under RISC OS v2.00 and v2.01 discs must be dismounted before being removed from the floppy drive. Failure to do so results in the dreaded 'FileCore in use.' error.

The ideal setting depends upon the vehicle, and the driver’s tastes. Settings tend to be different on rear wheel drive cars than on front wheel drive cars. Also, settings will vary between drag racing and road performance environments. Test the different adjustments to find the best combination for your vehicle.

The Switch Selection Page and Customer Specification Forms will get you started, but please contact the factory for assistance in selecting your switch. We will custom match a switch for your particular application.