yesVery nice. Have fun!not yet Not so good. You'll have to write your own driver or modify an existing one. You should contact the developers at [ gphoto minus devel at lists dot sourceforge dot net ] to coordinate your efforts with others who may already working it. no, but it is listed as PictBridge(tm) or PTP compatible gphoto2 --auto-detect will detect it as USB PTP Class camera and it will work (depending on permissions problems perhaps only as root user).

The Xtend-a-Slide has 49mm standard photo threads on the inner barrel, and connection is made to the camera either by attaching to the Lens Adapter or Camera threads directly (if possible) or through stepping rings and/or close-up lenses (if required).

You can connect up to four cameras to the VB101. If VC-C4/VC-C4Rs are used, all four cameras can be controlled.

The Swann Black Knight Camera receiver is only capable of displaying an image from one wireless camera at a time. To view or record more than one camera you must set the switch at the back of the receiver to 'Loop'. This will make the wireless receiver automatically cycle through the 4 channels sequentially, and pause on each for about 5 seconds before repeating the sequence. Note that only the active camera is displayed for viewing or recording while the receiver is set to 'Loop'.

The Swann Black Knight Camera receiver comes with an AV cable which plugs into the Video and Audio connectors on your TV or VCR. These plugs are commonly referred to as RCA plugs and are similar to the connectors used by game consoles and DVD players. If you plug your Swann Black Knight Camera's receiver into your VCR so that you can record the footage, you will need to select the AV channel on your VCR and then the channel on your TV that you normally use to watch video movies from your VCR.

Yes and no. Depending upon weight, balance and ergonomics, it may be harder for you to hold a small camera steady. Some people mistakenly believe that cameras with a smaller capture medium (sensor or film) or more susceptible to blur than cameras with a large capture medium given the same field of view just because the capture medium is smaller.

T2 backs are shipped with an adapter which allows the use of Nikon™ lenses with the T2. A 90-degree adaptor for mounting the T2 on a tripod is also included. MegaVision also manufactures a similar adaptor for Cannon™ lenses and a modified lens board for adapting to Cambo view cameras.

It depends on what kind of computer you are looking at. Many teachers have iBook laptops. Below is a link to show some ways of many this connection. For additional help with any of the below, contact your ETT or Ext.150.

You can hook up as many cameras as your TV has inputs. Most TVs have 2 inputs but when using a quad you can hook up four cameras.

Fisheye-Hemi 1 (Circle) works best with a lens and camera combination that covers 180 degrees horizontally across the field, such as a Nikon D80 with an 8mm lens. Fisheye-Hemi 2 (Full Frame) works best with a lens and camera combination that covers 180 degrees diagonally, such as a Nikon D80 with a 10.5mm lens. This combination is commonly called a "full frame fisheye image".

No. Our web cameras, video servers and DVR's are all self-contained hardware solutions. They are able to 'Stand Alone' and do not need to be connected to an additional computer to function. This minimizes the common PC related concerns; such as crashes, security breaches, slow performance, viruses and user errors. Our systems then connect directly to the internet and only use computers for remote viewing of the video from anywhere in the world. iWATCHLiVE.

The standard Digibox can tune in only one programme at a time and this programme can be routed around the house for viewing in other rooms. To assist in this, the Digibox has a second RF Output ( RF Outlet ) socket. For an additional sum you can buy a remote extender Digilink or SLXlink. This plugs into the RF cable at the remote TV and can send handset signals back to the Digibox. A wireless remote extender box "Powermid" and extra remotes are also available from SatCure.

The Ultimate 2000 is a pocketsize PC-to-TV converter recommended for professional presentations, computer gaming, and internet browsing on TV. It is perfect for displaying your Slide Shows on a PC for family and friends. Click the link above to find out more.

Yes, you can view your cameras over the internet with our Remote Witness software programs. For more information please see our Remote Viewing section of our web site.

Our customers are given access to an Administrator Interface. You will be able to asign and modify user names, passwords, and descriptions. You will also have several reports available to you showing who has viewed which camera and when!

Codecs allow Windows and many applications to view your RAW files. They are provided and maintained by the camera manufacturers. You can find codecs for the files in your Gallery by going to the 'File' menu in the Photo Gallery, and pressing the 'Check for updates' button in the 'Options Dialog'. If there are codecs available for files that you have in your Gallery, a web page will open with a link to download the codec.

Select the appropriate video input on your TV. Usually you can select the input mode by pressing the VIDEO or INPUT button on the remote control. You might also have to change the TV to Channel 0 or 2, and then use Channel Down to change video inputs. See your TV's owner's manual if you still aren't sure how to change the video source. Make sure that the ABCD switches on the bottom of the camera and the bottom of the wireless video receiver are set to the same letter.

The answer is Yes and No. Your camera works with 12V power supply and is designed to operate with constantly changing voltage levels (within normal range) produced by vehicles' battery and alternator. However, some vehicles have a very high momentary voltage at the vehicle starting time and the overload might cause damage to the camera. If that is the case for your vehicle, you will need to install a fuse/voltage regulator/etc. to protect your camera.

If your camera is not in our list of supported devices, you can help us work toward supporting your camera in two ways (in descending order of importance): Contact your camera's manufacturer and ask them to get in touch with us. We need technical specs and a sample camera or two. Send us the full name of the camera, the manufacturer and the output from running USB Prober to usbstillcams@ioxperts.com. To get USB Prober for Mac OS 9, download the Mac OS USB DDK 1.5.5 from http://developer.apple.