This is the width of the space that an overhead door will need to cover. If you provide us with the TODCO serial number, we have the opening width of your door on file. If the serial number is not available, please provide the actual measurements of the width of your trailer, from the left inside wall to the right inside wall (post to post), along with the name of the manufacturer of your truck body or trailer, and the year it was made.

This is the height of the space that an overhead door will need to cover. If you provide us with the TODCO serial number, we have the opening height of your door on file. If the serial number is not available, please provide us with two actual measurements: 1) the height of your trailer, from the inside floor to the inside ceiling, and 2) the distance from the inside floor sill to the underside of the header. See similar questions...

The Garage Door Screen is mounted (in front of the doorstop, one-inch wood strips) on the header and the doorjambs which the garage door is mounted to. See similar questions...

To get the standard width measurement, be sure to measure the opening in two places: at the top and bottom of the opening. See similar questions...

If your van comes with two side doors, always measure the door on the curb / passenger side because it's usually larger than the door on the driver side. As long as you have 30" or more on the door threshold where the ramp will be loaded, you'll be OK to use our ramps. See similar questions...

The panel height and opening width are mainly restricted by the maximum permissible panel weights. These in turn depend on the operator being used. In addition, however, it will be necessary to remain within certain height/width ratios that have been specified in order to ensure the smooth and low-wear running behaviour of the door system. You will find guide values in the relevant technical brochures. For additional information, please consult our sales advisors who will be glad to assist. See similar questions...

Yes, the screen frame is offset to compensate for this. The adjusting screws for the screen wheels need to be facing the interior of the house. If the screen is installed‘backwards’ then the handle hits the patio door. See similar questions...

Width is measured from edge to edge. If it is a slit seal bag measure inside seal to inside seal or inside seal to fold. Remember, every application is unique; the following information is intended to provide general information and guidelines. Please call our Technical Service Team at 763-225-6600 to discuss your specific need. In most cases, desiccants and oil are not necessary when the part is protected with Zerust® / Excor®. See similar questions...

Our Roll-Up Doors are attached to the wood guide rails which are part of the door package, and require support of vertical walls. See similar questions...

The width of each item is generally listed within the auction subheading or description. In the case of shoes, as a rule of thumb, are regular or medium width unless specified otherwise. See similar questions...

The maximum Residential Steel Sectional Door opening width is 6120mm (6200mm door width). Other Sectional Doors may have larger specifications. Refer to Sectional Door products (Aluminium & Industrial). See similar questions...

To achieve a single access door you would require an odd number of panels to stack in one direction i.e. 3, 5 or 7, etc or to split the stacking to both sides in order to achieve an odd number configuration to at least on side, i.e. 2:1, 5:1, 5:3 etc. To achieve a French door opening, you would require an odd number configuration to both sides, i.e. 1:3, 3:3, 7:3, etc. See similar questions...

No, in fact in most cases you won’t want to as you may have handles or knobs on the door. If you have a few inches sticking out when the door is opened, then the handles or knobs won’t smash into the cabinet. In a case where you want the door to retract all the way when open, then you need to explore the use of a recessed pull of some sort into your design. See similar questions...

Garador stock all current Garador Controll-A-Door Remotes as well as a range of remotes from obsolete autos; please refer to automatic accessory page. See similar questions...

No other manufacturer offers more styles, colors and windows than Clopay Classic, Murray Shaw's supplier of choice. Choose from Clopay's Pro-Series and never paint your garage door again. See similar questions...

For single doors, as a general rule, add 2" in width and 2-1/2" in height to the nominal door size for single doors. For instance, a standard 3/0 x 6/8 door would require a 38" x 82-1/2" rough opening. Pairs would require twice the nominal door width plus 2" as well as an additional 1/2" if there is an astragal ( between them. For example, a standard pair of 3/0 x 6/8 doors with an astragal would require a 74-1/2" x 82-1/2" rough opening. See similar questions...

For all prehung units we REQUIRE that you provide us with your rough opening size. We will build the unit to fit the rough opening size that is provided. If this is for new construction, we normally add 2" to the height of the door and a total of 2" to the width of the door for a rough opening. This allows for the thickness of the jamb and leaves an extra 1/2? in width and height to square the unit. See similar questions...

Klaus Parking Lifts are designed for allowing easy access to the cars parked on the platforms, passengers and luggage should be loaded or unloaded when the car is off the machine. The car should be parked as far to the right side of the platform as possible to allow the most space for the driver to access the car. The lift platforms are available in several widths and it is best to use the widest possible. See similar questions...

szlig;-Quantification (ultracentrifugation), non-denaturing gradient gel electrophoresis and nuclear magnetic resonance (NMR) are being used to determine LDL particle subfractions. See similar questions...