The traditional place is at the oil-pressure switch. On the SR20DE & SR20DET engines this is to the rear of the oil filter (which is on the right side of the engine, down low). An auto parts supplier should be able to supply the fittings you need. Looking at the wiring diagram, it seems the ECCS does not need the switch to be there, but you probably want to keep it. In this case a brass "T" fitting could be screwed into the original hole, and the switch and gauge take-off fitted to this.

Yes, but it isn't quite as easy as the '94 - '97 retrofit. See the full writeup in the Garage section. Many '99 owners have had trouble with their cruise control. Basically, after setting the speed, the car refuses to hold the setting, sometimes accelerating as much as 15mph over the set speed. You will need a replacement cruise control processor. See your dealer for the warranty work. We've just started hearing about this from a number of sources. See similar questions...

Standard gauge reading is approximately 35 at 30 miles per hour and 10 at idle speed. See the General Lubrication Page. The line coming out of the tank is solid but quickly turns into standard gas line hose. It runs inside the frame and is close to the exhaust pipe. I haven't caught fire yet. See similar questions...

The gauge of your jewelry is the thickness of the barbell that passed through your piercing. The smaller the gauge number (i.e. 000G), the thicker the jewelry. Check out our Body Piercing Size Help Page to help you establish what jewelry you need and to to covert the gauge to inches or millimeters. See similar questions...

The gauge reads a percentage full. To determine the amount of propane remaining in your tank, take the tank percentage reading and multiply it by your tank size. Example: 20% on a 500 gallon tank equals 100 gallons of gas remaining in your tank. See similar questions...

Most tanks of 47 gallon capacity or higher have a gauge. If your tank does have a gauge it will be located on the top of the tank, under the liftable “green” hood. The tank gauge reads in percentages from 0% to 100% with greater than 85% being full. See similar questions...

Don't ignore it. An oil pressure warning light (or low gauge reading) means one of two things: either your engine has dangerously low oil pressure (for a variety of reasons which we'll get to in a minute), or the oil pressure sending unit that triggers the warning light (or operates your gauge) has failed. First, do not keep driving if the oil warning light is on or your oil pressure gauge has dropped. Stop the engine, let it sit for a few minutes, then check the oil level. See similar questions...

There is no practical way to measure the pressure between the drive rollers and the reel flanges. A pressure gauge on the power unit cylinder is susceptible to false readings and therefore can become a safety problem. Any readings at the cylinder or extrapolations of such readings would vary from pull to pull depending on the cleanliness of the slide rails, the lubrication to the rails, the internal integrity of the cylinder and other factors that make it totally unreliable. See similar questions...

It can read the moisture as a relative reading; in other words it will give an indication of a problem area, but will not give a definite moisture content. There are constituents in concrete that can cause the moisture readings to be in error, but as long as the concrete is homogeneous, the error will be constant. Example: If the slab reads approximately 12% moisture in all areas but one area is approx. 20%, it can be assumed that this is a problem area. See similar questions...

There are many ways to use coconut oil and incorporate it into one’s diet. Since it is a stable cooking oil, one can simply replace unhealthy oils in their diet with coconut oil. Since it is a solid most of the time at room temperature or when refrigerated, it can be a butter or margarine substitute for spreads or for baking. Any recipe calling for butter, margarine, or any other oil can be substituted for coconut oil. It is popularly mixed in with “smoothies. See similar questions...

Heating oil is a commodity and as with all commodities several factors affect their price. Supply, the weather, tension in the Middle East. It seems as though when someone hiccups, the price of oil is affected. See similar questions...

We recommend a water pressure gauge on every boat with or with out a jack plate. A water pressure gauge monitors your water pressure to assure that you are getting adequate water pressure to your motor. See similar questions...

Most vacuum systems are outfitted with a total pressure measurement device such as an ion gauge, Penning gauge or Pirani gauge. An Extorr on a vacuum system is able to measure pressures from atmosphere to Ultra High Vacuum with its built-in Pirani and Ion gauge. All of these gauges will indicate how much total gas remains in the vacuum system. When the required level of vacuum can not be reached, other total pressure gauges can give no further information as to why. See similar questions...

There is no code requirement for gauges; however, it is helpful to have a pressure gauge installed on each side of pressure reducing valves. Installing one on the steam station or near the main valve also is a good practice. See similar questions...

Pressure is the amount of force pushing the flow of water. It's measured in pounds per square inch (PSI) and can be easily measured with a low cost pressure gauge. Knowing your starting pressure helps determine whether or not you need a pressure regulator, but it's not essential in a simple backyard system. Regular household pressure is often around 50 PSI. See similar questions...

We do not recommend this. Our studies were conducted reading the slides with a dry objective at a magnification of 400X. See similar questions...

There are at two explanations for the positive effects of slow breathing on blood pressure. The first is a simple physiological response: Breathing slowly and deeply relaxes muscle tension, particularly in the chest area, which allows the blood vessels to open up and relieve pressure on the heart. Now there is a new theory proposed by Dr. David Anderson of the National Institute of Health that has less to do with relaxation. See similar questions...

The pressure switch communicates with the tank and the pump. The pressure switch monitors the pressure inside the tank and activates and de-activates the pump when cut-in and cut-out pressures are reached inside the tank. See similar questions...

Typical oil pressure range for engines running at rated speed and operating temperature with SAE 10w30 or 15w40 oil is: (207 to 310 kpa) 30-45 psi for 3176B, C-10, C-12, 40-88 for 3406E. See similar questions...

While some pressure drop across the filter is normal, the oil filter is not capable of regulating the lube system pressure. Low oil pressure is generally the result of another malfunction in the engine such as the oil pump losing its prime or the pressure-regulating valve not functioning properly. See similar questions...