Yes firmware can be upgraded from any removable media or over the network via FTP transfer, Client or Server.

Q: Which program do I use for word processing, spreadcheat calculations, image processing, burning, scanning, surfing, chatting...

First boot KNOPPIX with the memory stick inserted. Got to the KNOPPIX menu, Configuration, Save Configuration. When asked, choose /dev/sda1. When booting type knoppix myconf=scan home=scan at the boot prompt. This is an issue with the Dell BIOS. Simply pull out the power cord from your computer for a few seconds, and your computer should start again. You can also try passing "apm=off" or "apm=real-mode-poweroff" to the kernel during startup.

In theory yes. Any Stick supporting USB 1.1 However Eurotherm have tested 6000 series using Sandisk products, as they are a reliable major supplier. Others, which may not be as robust to EMC problems, are used at the end users risk. USB 2.0 devices are generally backwards compatible to USB 1.1 which the 6000 series supports.

Yes, the analyzer firmware is automatically upgraded with each new Visual USB software release. No user intervention is required. Our newsletter is sent to all subscribers when a new software is released.

Every realese of 2N SmartGate PCmanager contains already correct firmware. For the newest PCManager, please contact person who sold you the gateway If you get the firmware file separately (without PCManager), copy it to the folder with installed SmartGate PCManager Open PCManager -> click on upgrade icon -> confirm control question -> switch off and switch on gateway ->choose proper realese of firmware.

Memory Stick is an IC recording media that uses flash memory. Since it records various types of digital content and...

Yes, it can. However, if you remove the stick, the file is gone -- you cannot let the iliad copy it to internal memory.

First, disconnect the AC power by unplugging your power adapter. Turn over the laptop and remove the battery. Locate and remove the memory panel. Insert the memory module into the open socket, and replace the memory panel. NOTE: You should verify that your notebook has an open memory socket available (some models may not). If no open socket is available, please contact Best Buy technical support and service.

Next I open up the WET11 and take out the bromax pcmcia card that is inside, and install it in my laptop. I got the windows drivers from here: &www.bromax.com/ That zip file from demarctech should come with station firmware 1.1.0 and primary firmware 1.4.9. It should also come with a program with winupdate that you use to load those firmwares to the bromax card.

Whenever you download the latest version of WinTally, it will contain the latest version of MicroTally firmware. When you connect your MicroTally unit with WinTally you will automatically be notified by WinTally if it has a more recent version of MicroTally firmware available and you will be prompted to upgrade the unit. WARNING! If you have data in the MicroTally that you are going to be downloading, do not upgrade until you have downloaded the data.

No, you have to connect by serial cable and upload the hex file in Gateway control > Upload firmware menu.

EDITOR: Download it, read the firmware FAQ, unzip it, connect your Set top box to COM1 and run the upd_com1.bat file Thanks, I will let you know if this fixes the problem. Incidentally I haven’t checked if the unit gets hot but it is not stacked. Matty… Your unit is most definitely stuffed. If it is heating during the recording phase then this is due to the internal power supply having trouble pumping “juice” to the hard drive.