Answer: In most cases DVD X Maker will handle a change in display resolution properly, but it is best to avoid switching resolution if the application is busy such as playing back a video, auto generating a menu, or loading the DVD Simulator. If the application stops playing video, try switching views in the workspace. If that does not respond, you will need to close the application with the Task Manager and reopen it.

There are a few settings that can easily be changed by hitting a few wrong buttons accidentally which can cause the VL70-m to stop responding. If this happens check the following: Check the switch on the rear of the VL70-m is set properly. It should be on MIDI when using the MIDI IN or WX IN connectors. Also push the BREATH button and use the SELECT and VALUE buttons to make sure the Breath Mode is set to "BC/WX", and Breath Control is set to "BC".

A picture resolution of 640 x 480 is a minimum requirement for optimum display and optimum functionality of the STORYBOX Network. A picture with a resolution less than 640 x 480 displays with black borders on all 4 sides. There is no way to make these pictures full-screen when displayed on the Frame.

The Frame compresses this picture to 640 x 480 for display. If the picture is stored in your StoryCenter on the STORYBOX Network (in your Inbox, or in an Album), it will be stored at its original resolution there. If you Share! a picture directly from your Frame (to another Frame, to another STORYBOX member's Inbox, to an e-mail address), it will not be possible for the receiver to regain the picture's original resolution.

The display system was created to optimize XGA screen resolutions; therefore, 1024 x 768 will provide a much sharper image than 640 x 480. There is a known problem running Norton Anti-Virus Software. Here is how you can get your system up and running quickly. Reboot the system and press the F8 key on the keyboard when the screen appears saying "Starting Windows 95." This will allow you to see a startup menu. Modify the autoexc.

The maximum resolution and specifications of BRAVIA LCD TV's are as follows. BRAVIA V Series: Support highest computer resolut...

The idea was hatched rather quickly and I had hoped that she would be able to chat several other times. However, that just never worked out.

No. The crossover point cannot be changed since it depends on the resonant point of the INFRA subwoofer system. The INFRA processors allow altering the hi pass filter frequency by changing plug-in resistors inside the units of the INFRA-M and INFRA-M2. However, this does not change the true crossover point of the system and will, in fact, create either a gap or an overlap in the frequency response of the bi-amplified system depending on the filter frequency chosen.

Ultra-Mobile PCs generally use an 800x480 screen resolution. You can adjust some models to 800x600 and 1080x640.

NuVJ offers as rendering sizes all the resolutions available in your system (see Preferences / Display). The maximum resolution depends on your graphic card and on the display device you have connected (monitor or projector). If you are using the S-Video output it is useless to define a resolution superior to 640x480 for NTSC standard (US) or 720x576 for PAL standard (Europe).

LCD displays have preset resolutions; they typically contain several hundreds of thousands of pixels which are arranged in a grid. These pixels are lit up in various colors to create an onscreen image. The native resolution of an LCD display is expressed like this: [number of pixels horizontally] x [number of pixels vertically]; i.e. 800 x 600, 640 x 480. That said, many of the LCD displays can handle input signals representing resolutions other than their native resolutions.

During FireStore's boot-up sequence, there is a brief period where the disk drive is able to mount to the computer before being mounted to FireStore. On most Mac based computer systems, it is necessary to first "eject" the attached FireWire disk drive by putting into the Trash. In this case where the disk drive briefly mounts to the computer, this software controlled ejection of hardware does not occur and hence the message.

Within the next couple of years, a definitive answer to whether thimerosal is linked to autism should be at hand. If thimerosal causes autism, then the prevalence of autism should dramatically decline. As discussed above, empirical evidence on the cause(s) of autism implicates other sources and it is not unlikely that the prevalence of autism spectrum disorders could continue to increase.

The "set point" is a weight range that your body attempts to maintain at any given point in time. The body likes things to remain the same, and that also applies to your weight. If you have been at a certain weight for a given period of time (months), your body begins to consider that particular weight to be "normal." This "normal" weight that your body is accustomed to is what we refer to as the "set-point".

If the Rotor System is not properly installed, the regulation point can change and rotate downward. There are several incidents where this may occur; an insufficient amount of thread lock was used during installation, the thread lock did not completely dry after installation, the threads in the BB tube housing were not thoroughly cleaned of grease or debris before installing the Rotor System preventing full adhesion, or the Rotor System was not properly tightened.

If you haven´t been here in a while ? everything! New press box and Kimsey Center at Michie Stadium; bridge connecting Michie/Kimsey to the Holleder Center; new roads, new PX, new commissary; new library under construction (did you use the last one?); Arvin Gym completely re-done ? it is awesome; some new academic department names and locations; the I Companies are gone; and lots more.

No, but our carton designers can help create a counter top or floor display that can be printed with your product information, company name, etc.

The widescreen information now conforms to the standard; it is unlikely that Topfield will alter the software to make it non-compliant, just to work with other equipment that may itself have widescreen problems. If you’ve not found the information you’re after, why not ask in the Forums, or check to see if there’s a detailed guide to the topic you’re interested in? You can also use the site search box to search the text of all our FAQs and other information for keywords.

The Site F.A.Q. I have some Grim Fandango fan art/fan fiction/any other content, and I want to contribute it. Great! We want to add as much content as possible to this site, to make it the ultimate Grim Fandango resource. So, if you have any content, just e-mail me with it.