To make sure that your door is installed and serviced properly, we sell our products only through our authorized Raynor distributors. They are trained and qualified to provide the best installation and service for your Raynor door.

The first time the Garage Door Screen is installed, it might take 30 minutes to install. After that, it takes only a minute or so to put up or take down.

Everything needed to install your screen is included. Hook and self-adhesive loop fastener, screen, and directions.

Your local Raynor dealer carries a wide variety of garage door parts. Some hardware stores also have a limited selection, but your local Raynor dealer is your best bet.

One year from the date of purchase on workmanship and materials. This warranty excludes damage done by a sharp object, such as a knife, or an animal trying to scratch through the screen or a vehicle that has run into the screen.

The Garage Door Screen is mounted (in front of the doorstop, one-inch wood strips) on the header and the doorjambs which the garage door is mounted to.

All our residential steel doors are already finish painted and ready for years of maintenance-free beauty. However, if you want to apply another color, clean the surface with a powder cleanser like Comet. Rinse the surface thoroughly and allow it to dry. Use an acrylic latex exterior paint and apply it with a brush.

The door package includes the sections, track, spring assembly, operator reinforcement bracket and hardware required to install the door. Several additional items can be purchased at your Holmes retailer to aid in installation. These items are: 1) Rear track hanger kit for attachment of the horizontal track to the ceiling in the back of the garage. Existing hangers generally can be reused.

Yes. With double zippers you can roll the screen up and lock it in place. This allows the screen to remain installed, while allowing a vehicle to be driven in and out of the garage.

Yes. The Garage Door Screen is designed to be left up throughout the season. The hook and loop system makes the Garage Door Screen easy to install at the start of the season and easy to remove to be stored for the winter months.

Nothing. Buyers often put ?" conduit or ?" fiberglass rod in the pouch that is sewn into the bottom of the screen. This keeps the wind from blowing the screen.

Our garage door screens have been designed to mount on the outside of your garage door, however, some customers do figure a way to mount them inside of their door. It is recommended to mount on the outside of you door to prevent any possibility of interference with the operation of your door.

Talking to us would be the first step. We are better suited to assess that aspect. One recent comment "You were right Alan, it is so simple if it's done to your routine. The next one will be a breeze"

Holmes recommends that only experienced do-it-yourselfers tackle installing a garage door. DIYers should enlist the help of at least one other person when installing a garage door for the first time. Common tools needed for installation are screwdrivers, wrenches, a power drill and a stepladder. Depending on the skill level of the DIYer, installation can take 8 – 10 hours.

Punched angle for rear track hangers and automatic opener - 1 _" x 1 _" minimum (angle at least 13 ga. or 3/32" thick.)

No. When you have a Raynor opener attached to your Raynor door, the opener will hold your door closed until someone activates the opener. If your door has an exterior lock, it will need to be disengaged in order for the opener to be able to open your door.

We ship you enough self-adhesive loop to mount your size screen with each order. Unless you specify a different color, black loop is shipped with your order. However, you can choose a different color if you like. Colors available are white, brown, beige, and gray.