You just have to press the "SETUP" key on remote control. Then just watch the top menu bar (right part).

The controller's properties information displays the firmware version that is installed on the controller. From the Storage tree view object, you can display the firmware version for all controllers attached to the system. (A controller's Information/Configuration subtab also displays the firmware installed on that controller.) Click the Information/Configuration subtab. See similar questions...

If you want to know the current version installed on the player you have to do the following operations: All the internal version numbers are now displayed on TV (and the one corresponding to the version is the 4th one). See similar questions...

You can find the firmware version for your writer by accessing the writer's properties through the Control Panel. Your computer may have a slightly different procedure, depending on the MACINTOSH or Personal Computer you have. This is a generic procedure, to be used as a guide to finding firmware versions. Media is available from other sources in an 80 mm. diameter circular format and a variety of custom shapes. An Internet search will provide numerous sources. See similar questions...

You can select “Check for iTunes Updates” located under the “Help” option in the menu bar to have iTunes verify that you are running the most recent version. See similar questions...

The latest software for the PORTADISC MDP 500 is version 1.50. The version is shown briefly after power up on the MDP’s boot-up page. If your MDP contains a version other than v1.50, contact your dealer for instructions on getting your MDP updated to the current release. See similar questions...

Most writing software has an option for showing CD recorder information, which will include the firmware version. Check the firmware version using your writing software, which will have an option for CD recorder information, including the firmware version. Or you can also check it using the RFlash/Firmware Flash Utility program for uploading the firmware. See similar questions...

The firmware version can be found on the USB Serial Ports Advanced Options tab of the device manager. See similar questions...

Login the router, click "Status" at the top corner, then check "Runtime Code Version". The runtime code version is the firmware version. See similar questions...

Please take out the battery and find a serial No. in the Clip, LXXXXXXXX, and please send us a email (service@fortuna.com.tw) for us to check if your Clip-on is with 2.02 firmware version. If your Clip-on is not the Xtrac 2.02 version and you want to upgrade your firmware, we let our dealers deal with the firmware upgrade for our Clip-on GPS receiver, so please contact your dealer to upgrade the latest firmware version. See similar questions...

Please note you have to use Fortuna made USB cable to update the firmware and when you use the cable, it is better to take out the batteries. Please find the firmware upgrade instruction from the GPSmart download page. See similar questions...

The firmware version can be obtained on the Information - System page. It is listed as "S/W version". See similar questions...

Unless you have hardware affected by a fix (esp. specific 256MB Sandisk cards on Meridan) or you have DirectRoute, my personal advice is to remain on the lowest number above 4.06 that works with your hardware and mapping programs. Some folks on the list are happy with the newer versions, so it's up to you to decide. See similar questions...

If you are not running the current version 1.04.6008 then you must upgrade prior to registration. The registration process will prevent registration until upgrades have been performed. If the upgrade failed due to you not being connected to the Internet try running the software as a Demo and Upgrade from inside the software. Start Music Book Deluxe without keying in the serial number and checking the run as demo check box. Once the program has opened go to Maintenance > Settings > Flash Upgrade. See similar questions...

Go to Start® Settings® Control Panel® Add/Remove programs and select Dell OpenManage Server Administrator. Select the link for support information. See similar questions...

A test for the plug-in is automatically run on the PASS PRO login/registration page, and it should read as follows "Flash Player test successful" (the test is positioned at the top of the yellow registration form). If the test shows any other result (like: "You do not have a recent Flash Player") it is recommended that you follow the steps required to update your Flash Player (which is a quick and simple process) See similar questions...

If the modem is enabled, you will find the ATIX string where “X?in the ATI name denotes ATI3, for example, as the firmware version. The other method is to issue AT commands under a communication utility like HyperTerminal from the Accessories menu. In terminal mode, type the commands given below See similar questions...

No, remote loading is discouraged. If you're really keen, you can set up a mirror of it and use that. See similar questions...

DenyHosts requires Python v2.3 or later. If you are using an earlier version of Python then you should install a newer version of Python on your system. Multiple versions of Python can safely co-exist on your server so you do not need to worry about breaking any dependencies. You should obtain the latest version of Python and install it on your system. Depending on the method of download, your latest Python executable is typically installed in /usr/local/bin or /usr/bin. See similar questions...

This is how you can check your Firmware version number. Press Menu and go to the setup menu (blue wrench on the left). Go in, and then select screen #1. Hold down the center OK button on the 4-way switch and at the same time press the Info button (i+) at the top. This will display a little dialog with the primary version of the firmware. While that screen is visible again press the AEL button and the Info button together. See similar questions...