If you place any value on your time, I wouldn't particularly recommend it, but pfranc does make the necessary connectors available.

If you did not receive a serial cable with your Cisco 675 or 678 modem, contact the Qwest Broadband™ support center at 1-800-247-7285. See similar questions...

I've connected the USB to Serial adapter but it's on Com Port 5 (or higher) and your software only has Ports 1-4. This issue applies to the c\temp software only. This has been resolved with the new version of the MDAS-Pro software. If you do not have a copy of this software, please contact us. See similar questions...

Serial Port to MIDI Cable -- this adaptor cable will connect your PC's serial port (RS-232C) to any Roland instrument that has a "computer port." Item: 362CP6 Buying a pre-made one is far easier than making your own. If you don't want to use MIDI cables, this is the way to go. You will have to install a serial/MIDI driver for it to work. Be sure to download the most recent driver for your system. Additional info on cable requirements is here. See similar questions...

The serial cable of standard package in LB-8000 is 5 meters. You also can build your own serial cable up to 15 meters. See similar questions...

Yes, the pin map is at cable.html. Homemade cables are not as good as manufactured cables due to stray effects (inductance and capacitance) because they are not tightly and controllably wrapped and shielded. Such affects can slow transfer speed, cause timeouts and in extreme cases, can even cause corruption of transferred files. If you want to make your own cable, keep it as short as possible. See similar questions...

Yes. The easiest way to do this is to extend the side of the cable with the RS232-C connector. You can purchase a connector and an extra length of standard "RS232-C straight through" cable from many local electronics stores. The maximum recommended total cable length (including all parts and extensions) is 25 feet. See similar questions...

Answer: Yes! We have a serial cable that will work on most serial dot matrix and laser printers. It is a DB9 to DB25 null modem cable. If the communications port on your computer has a DB25 connector, you will also need the 9 to 25 adapter for this cable. We can also provide a DB25 to RJ45 serial adapter if necessary. To find these items, place the word "cable" in the search window (located at the top left side of each web page). See similar questions...

Are you using the proper cable? (it should be black; the ThoughtStream cable looks identical but is beige) Is Proteus in DL mode? (if not, press the middle button until it is, and repeat the download process. Remember that the Proteus digital display will show rapidly changing numbers if it is receiving data. If you’ve tried all of the above and you still cannot download, write or call us. See similar questions...

You must use a 9 pin straight through (not null modem) cable with the appropriate connectors for the IT and the computer (one male and one female). See similar questions...

Both provide equivalent communication for all our meters. The distinction is that each kind of cable is intended for a different kind of connector to the computer. Some newer computers do not provide serial ports, which is why we introduced the USB version of the OneTouch Interface Cable in 2004. See similar questions...

No. Although the OneTouch USB Cable was more recently introduced, it is not considered an upgrade from the serial cable. Rather, it is a distinct product. The two types of cables are equivalent in quality. See similar questions...

Q. I've tried to connect my 2100 with 8210 cable and nothing happens. Your program doesn't detect my phone. See similar questions...

T3 serial port has some bugs. Whatever the configuration software can do, the hardware handshake is always active. As most of ours scopes do not provide such signal, a home made specific connector is mandatory where RTS and CTS pin connected to the T3 serial cable MUST be wired to create a fake signal. This hardware patch will work only for scope. If you are using GPS, there is an other bug in T3 serial management that should cause a crash (buffer overflow). See similar questions...

We designed our serial connections to be compatible with a straight-through 9-pin male-to-female serial cable. Please note that we only use pins 2, 3 and 5 of the cable. See similar questions...

PrintCapture uses standard serial protocols to communicate with your oscilloscope, logic analyzer, or spectrum analyzer. PrintCapture only receives data from your test equipment - it does not transmit any data back to your test equipment. The serial port on a Windows-based computer is configured as DTE (Data Terminal Equipment). Some logic analyzers, spectrum analyzers, and oscilloscopes are also configured as DTE but some are configured as DCE (Data Communications Equipment). See similar questions...