A10: Minimum three blades are required to take care of uniform air-flow and aesthetics simultaneously.

Yes. Unlike most sites that will only sell you painted fan blades for one model or style of fan we offer just the blades for any fan model with complete installation instructions. If you need, we will provide and sell a complete fan. Please contact us for a price.

A2: Minimum distance between ceiling or a projecting beam & ceiling fan blades should be 0.25 Mtrs ( Approx 9.5 Inches )

Generally it is not recommended to use CFLs in vibrating environments. Vibration can cause the electronics in the CFL to fail. There is one CFL bulb (FLE11) that is available for use in a ceiling fan. Check the package for this application.

You can use a ceiling fan anywhere you have a ceiling. Covered decks, porches and gazebos make great spots for a fan. Underwriter's Laboratory lists fans for outdoor use are two types of listings: "damp location" and "wet location". Damp location is suitable for most outdoor uses while wet location is intended for more severe situations.

Yes. NuTone bath fans are designed to provide adequate cooling for motors and lighting, as well as products with integral heaters.

Definitely. Joyce? provides a fan beam mullion for the studio rooms to conceal the wiring. For a gable room it is mounted to the ridge beam. You should make sure you have the proper clearance.

Yes. Most manufacturers of ceiling fans have adaptable fan canopies or mounting systems that enable installation on high ceilings. Follow the instructions provided with your fan for details. If your fan does not have such items included, most ceiling fan retail outlets carry accessory adapters that can be used for this kind of installation.

This depends mainly on the CFM (cubic feet per minute) rating which indicates the amount of air flow that is moved. Your ceiling fan dealer or manufacture can determine the CFM ratings for different ceiling fans. Another way is to compare different fans during actual use in the store and feel the breeze each produces. The fan with the greatest breeze will usually have the greatest CFM rating.

A wireless remote can be attached to most ceiling fans allowing remote control of the motor and light.

A8: Efficiency of a ceiling fan is a ratio of air delivered by fan in Cubic Mtrs Per Minute and electrical power input in Watts, when fan is operated at rated voltage. (This is also known as a ?service value? of a fan ).

We don't need to remove them. When the room is dark, the lamp will not be noticed or get in the way of the stars. Same with ceiling fans. They are not an obstacle. In fact, when the fan is on, it feels like a breeze coming down from the sky.

Blade pitch is the angle of the blades when compared to the horizontal. Quality fans generally have a blade pitch of 12-14 degrees. Lesser fans can have a blade pitch as low as 8 or 10 degrees. The higher the pitch, the more pressure the fan blade applies to the air in front of it as it turns and the more air is forced downward. That's why some lesser quality fans can look like they're spinning up a storm, but when you stand under them, you can't feel anything.

The DeGeorge Fan is the only one of its kind in the world. Our fan is unique because of its safety factor which is absent in all other ceiling fans. Great for confined or low-ceiling areas. The fan features two motors: the first motor rotates the six 45-degree pitched blades, and the second rotates the bottom louvered grill.

When ordering a fan with a palm blade set, you will receive two spare blades. The wicker, bamboo, canvas, OcoeeTM and wood blade sets do not contain any spare/replacement blades.

Dust them regularly with a feather duster or soft dusting brush. Because of their coating and durability, the wicker, bamboo, wood and OcoeeTM blades can be cleaned with a damp cloth.

The fan blades are not guaranteed/warranted for any specified amount of time. Depending on the use and location of the fan, you should expect to replace your palm leaf blades every three to five years. The wicker, bamboo, OcoeeTM and canvas blades should not need to be replaced for at least 10 years. Of course, if you receive a blade set with damaged blades in it, Fanimation will replace any blades needed to hang the fan.

No. A dimmer can damage the fan motor. Only use a Fan Speed Control to control a ceiling fan. Fan Speed Controls have special circuitry that will not damage the motor. For ceiling fans with a built-in light fixture, combination Dimmer/Fan Speed Controls are available.

Most people who purchase a ceiling fan do so to utilize the first option. You expect to turn on the fan and feel a breeze, or at least some moving air. This is most effective with the fan in downdraft mode on a medium or high speed. While you will feel the strongest breeze directly under the fan, if the fan is good quality, and the proper size and installation for the room, you should be able to feel air circulating no matter where you are in the room.

To get maximum comfort and energy savings, it is necessary to choose the correct size fan for a room. Blade span is the key. A fan that is too small or too big for your room may look awkward. A fan that is too small probably will not move enough air and a fan that is too big might overpower the room. We recommend the following: Large Rooms - For rooms up to 225 square feet (15' x 15') and larger, use a fan with a blade span of 50", 52", 54", or 56".