The purge valve is an auxiliary nitrous solenoid that is activated manually by the driver prior to a nitrous assisted pass. This solenoid vents the gaseous nitrous from the supply line that connects the nitrous bottle to the nitrous solenoid. This allows a pure liquid nitrous charge to enter the engine for an instant surge of power. A purge valve is worth about a tenth of a second on a quarter mile pass. Yes, everyone needs a purge valve.

A purge is a deletion of the entire class schedule of a student due to non-payment of fees (or having a balance due). Students who are purged must re-register to be officially enrolled at the University. See similar questions...

You would need to purge a system because air is in the lines and water is not flowing to the radiators. By using a key from a hardware store, open the valve on the radiator until you get a steady stream of water. You will need to start at the first floor radiators and work your way up. A steam boiler's pressure gauge should read about 4-5lbs and a hot water boiler's gauge should read about 12-15lbs. See similar questions...

A nitrous purge kit clears the delivery lines of unwanted air and vapor and guarantees immediate power from your nitrous system. It’s also used to intimidate your competition and shows the world your nitrous equipped. The ZEX™ purge kit (part #82010) uses the industry’s largest solenoid, creating an awesome purge cloud. See similar questions...

To purge a cached page, such as when making changes to the navigation bar, add &action=purge to the end of the page's dynamic URL. Note that the URL must be using the active directory name (/w/ by default) rather than the static one (/wiki/ by default). Attempting to append the purge command to a static URL (e.g. http://www.mediawiki.org/wiki/Main_Page&action=purge) will instead take you to a page name containing the purge command at the end (in this case, "Main Page&action=purge"). See similar questions...

There is a global $wgCacheEpoch variable which can be set in LocalSettings.php to invalidate all prior cache entries (see DefaultSettings.php) If you want to purge all pages in the parser cache, truncate objectcache table from the wiki database. See similar questions...

Food addiction has many faces. Some food addicts are obese, some are not overweight, some binge and purge, some are anorexic. Our common problem is food addiction. All food addicts can obtain help from Food Addicts Anonymous. The only requirement for membership is a desire to stop eating addictive foods. See similar questions...

In a sewage system a check valve is required to prevent the sewage from draining back to the basin. They are recommended for all other submersible pump systems. See similar questions...

Whenever a silo is being filled by a pneumatic offloading system (pressure blower), high pressure is forcing material into the silo. The pressure safety valve, or "pop-off valve" will allow the pressure to escape preventing any additional damage. Top See similar questions...

The multi-valve is self cleaning under normal use and therefore does not need to be unscrewed. If food particles have been expelled into the valve, it can be disassembled easily for cleaning, following the directions in the user's guide. See similar questions...

You have three choices: AZFRL/SUZRL (AAR no. E 989037) ball valves with a face to face of 4 ¾ inches, the WSRR/WSRF (AAR no. E 989022) butterfly valve requiring 1/3 of the normal skid height or the 5REB3 (AAR no. E979039-A) very low profile ball valve. See similar questions...

number[period] Where number is any integer greater than zero and period can contain one of the values in: s, m, h, d, w, y. Where: See similar questions...

We recommend a speaker cabinet is connected to Marshall Amplifiers at all times. Failure to do this can and will cause damage to your amplifier. The vent on the top of your unit is part of the ventilation to keep the valves running at the correct temperature; the top and back grill must have a good air flow at all times as is if it is restricted this can and will cause damage. See similar questions...

It is important that you know where your inside shut-off valve is so in case there is a leak or break in your plumbing system, you will be able to turn the water off quickly. Shut-off valves are typically located in a crawl space, basement, or at least the bottom floor of the building. If you are unable to locate it, please call us and we will assist you. See similar questions...

When we process cylinders, we usually need to immerse the whole thing in some strong chemicals that will eat materials like steel, brass and so on. Because of that, we like to have all of those materials removed before we start work. Sometimes, parts are cast into place during the manufacturing process and they are impossible to remove. In that case, we will paint a protective lacquer on those parts to try to prevent any chemical attack. See similar questions...

Yes. The drier-accumulator, orifice tube and leaking or restricted expansion valve must be replaced before installing the SSR R-134a kit. Please see Procedure Guide under Technical Info on this website. Procedure guide is also included in each kit. See similar questions...

So the "Power" Boost Valves are pointless - moreover they must be set up on a rolling road to work properly. See similar questions...

Always replace the rubber snap in valve for deterioration and if in doubt then replace it, always using the correct type and with an air tight metal valve cap. See similar questions...

Answer: You should replace any shuttle valve with a serial number (on the sticker on the shuttle valve) is lower than 10243. This can be done by purchasing either the 05158 upgrade kit (for SVS-III systems) or 05174 upgrade kit (for SVS-1A systems). See similar questions...