ABCsafetymart.com- Dust mask usage information
There are so many different types of welding environments and applications to consider. But in general, in non-confined spaces, areas free of oil and where a substance specific standard does not exist, any of the Moldex N Class respirators could possibly be used such as the 2300 N Series, 2700 N Series, 2310N99 and 2315N99. Where nuisance levels of either ozone or organic vapors below the OSHA PEL might be present, the Moldex #2400N95, or 2800N95 is recommended.
ABCsafetymart.com- Dust mask usage information
You CANNOT use any particulate product for sandblasting. Where exposure to silica occurs other than sandblasting, particulate respirators can be considered. There are different classes of silica with different TLV's or PEL's. Top
X-Pando Products Company - Special No. 2
Rods of low-heat type are recommended. The heat is kept to a minimum. 1/8" or 5/32" Unimatic 6000 rods, manufactured by Eutectic, or their equivalent, are recommended for this application. The finished weld, using these rods, is stronger, and there is less possibility of damage to the cement lining from excessive heat.
ADA.org: A-Z Topics: Severe Acute Respiratory Syndrome (SARS...
A surgical mask and protective eyewear is all you need to care for dental patients. An N95 respirator (that is cleared by FDA for medical use) is only recommended for healthcare workers caring for SARS patients. However, due to the quick course of the disease, it appears unlikely that the dentist will encounter a SARS patient in the dental office.
SafeTech - Frequently Asked Questions (FAQ's)
Fit testing is required when OSHA or the employer requires employees to wear tight fitting respirators. The employee must pass a fit test prior to the initial use of the respirator. Additional fit tests are required whenever the employee reports, or the employer, Physician or other Licensed Health Care Professional (PLHCP), Supervisor, or Program Administrator observes changes in the employee's physical condition that could affect respirator fit.
Frequently Asked Questions
Yes, all respirators shall be selected on the basis of hazards to be encountered in the workplace (i.e. particulates, vapors, mists, Oxygen-deficient atmospheres, or a combination). There are different respirator types that address different hazards.
On-Line Respiratory Examination
No, any brand of respirator can be used for the medical clearance. We need to know only the type of mask ( face filtering facepiece (dust mask), half facepiece, full facepiece, PAPR, SCBA, or supplied air).
Respiratory Frequently Asked Questions
OSHA's respirator standard, (29 CFR 1910.134), requires the use of respirators to protect employees from breathing contaminated and/or oxygen deficient air when effective engineering controls are not feasible, or while they are being instituted. Several other OSHA regulations also require the use of respirators.
M New Zealand Avian Bird Flu FAQ & General Info
Disposable respirators should not be cleaned; dispose of the respirator immediately after use according to facility policy. Reusable respirators may be disinfected using a mild bleach and water solution (0.1% sodium hypochlorite).
American Chemical | FAQs About Solvent Based Adhesives
Refer to Section VIII of the MSDS for the exposure guidelines and the recommended PPE to be used (i.e. gloves, safety glasses, NIOSH approved respirator, ect) If respirator is recommended, go to the OSHA web page to determine all the requirements for respirator use. To purchase a respirator, check either the local Yellow Pages or do a web search for Safety Supply Vendors. Vendors typically provide charts indicating the appropriate cartridge to use for the different hazardous materials.
There is no simple answer to this question as there will normally be Oxides of Carbon and Nitrogen in the mixture of exhaust gases which cannot be filtered out. The only way to protect against all the contaminants in vehicle exhaust would be with either a supplied air system or self contained breathing apparatus (SCBA). This solution is often not practicable so a compromise solution has to be reached. One option is a 3M half mask fitted with 3M™ 2128 Filters.
Frequently asked questions about Muggy Weld's Super Alloys
We specialize in the use of our Super Alloy line and are unable to answer questions related to other welding rods. [back to top] To join (metals) by applying heat, sometimes with pressure and sometimes with an intermediate or filler metal having a high melting point.
Inglis & Retrotec Cycles: FAQ
I build bicycles with these joining methods: tig welding, fillet brazing, and lugs. All three work great, it just depends on how a customer wants their bike to look and how much they want to spend.
FAQ'S - most frequently asked questions
All persons planning on using a respirator on a regular basis must receive training in the proper use, maintenance, storage and fit of the respirator. This training requirement includes those persons who have purchased their own respirators, as well as the respirators provided by the Department. The training is given in the Department of Chemistry and Biochemistry on an annual basis. Disposable respirators are provided to participants in the Respirator Program.
Bullard’s Frequently Asked Questions Page
The Bullard Cartridge Selector Guide is a good tool for identifying the appropriate respirator for specific substances. The NIOSH pocket guide to chemical hazards also provides respirator selection guidelines. http://www.cdc.gov/niosh/npg/
Spaz Stix -Frequently Asked Questions
Answer: We recommend using a non harsh waterbased clear coat. Be sure to test on a scrap piece before painting your final project so you cna practice your technique and know what results to expect.
Granite Industrial Gases - Resources - FAQ - High Pressure C...
Tip sizes and gas regulator settings are dependent on the thickness of the material to be welded and the type torch being used. Reproduced below are the tip charts for two of the most popular types of torches in use. Call or email us if you don't see your particular torch listed here. Harris Welding Torches & Tips
Frequently asked questions - equipment and materials
The employer has the legal responsibility to identify all foreseeable hazards and to assess them for the risk posed and where ever possible eliminate them. If the risk cannot be eliminated they must be controlled. Chapter 4 of the OHS Regulations has specific guidance for work environment risks such as lighting, workspace, hot and cold environments, noise, atmospheric contaminants and working at heights etc.
AL-6XN FAQs - Frequently Asked Questions about AL-6XN Alloy
Expect corrosion to take place in the weld and in the heat affected zone adjacent to the weld. Without following the correct welding guidelines, AL-6XN alloy will have only a little better corrosion resistance than a 317L stainless steel. In applications where AL-6XN is most commonly used, failure without following the correct installation guidelines is imminent.