Residuumsol: Fuel Oil Additive is a liquid blend of organic chemicals in a petroleum base. The ingredients of Residuumsol: Fuel Oil Additive include detergents, combustion catalyst, chemicals that reduce the surface tension of the fuel oil, oxidation inhibitor and deposit modifiers. Residuumsol: Fuel Oil Additive is easily miscible and fully compatible with all varieties of fuel oil.

Stanadyne's Performance Formula. Stanadyne, being a major manufacturer of fuel injection systems in America has formulated an all season additive and has been proven by an independent research institute to out perform all others on the market.

The time proven remedy is to add a gallon of kerosene for each 10 to 20 gallons of fuel to the tank, then allow it to sit long enough for the kerosene to diffuse into the fuel. In weather below -20 degrees F, one gallon of kerosene for 10 gallons of fuel will keep things moving, but fuel economy will be reduced. Kerosene now has red dye which a DOT inspector will assume is off-road diesel. Be prepared for a hassle if you are checked.

Diesel fuel quality is declining throughout the world, and we expect the trend to continue. In fact, a recent survey suggests that 70% of diesel fuel sold at service stations does not meet the SAE standard for diesel fuel lubricity. The three leading factors are: - crude oil sources, - refining techniques, and - blending techniques.

It is advised that Residuumsol: Fuel Oil Additive be added to the main storage tank just before fresh fuel is transferred to it because the agitation caused by the transfer of the fuel to the tank is enough for the additive to get homogenously mixed in the fuel oil.

Unfortunately, some cologne bottles are factory sealed. If you can not open your cologne bottle, you may spray your cologne into a smaller bottle and then mix it with 'MaxPheromone Fragrance Additive'. Or you may also consider purchasing our 'INVISIBLE' 10ml spray product. It is unscented, to be used by itself without mixing, or you can spray on 'INVISIBLE' after applying your cologne. ATTENTION: Click HERE! for FragranceX.com - Get up to 80% off BRAND NAME perfume and cologne!!! WOW!!!

Testing has confirmed that biodiesel can provide sufficient levels of fuel lubricity, even at blend levels below 1%, in current on-road diesel fuel. Testing is underway to determine specific blend levels that would be required in ultra-low sulfur diesel fuel (15 ppm). Replenishing the loss lubricity that will be apparent in future diesel fuel can be accomplished with conventional lubricity additives either on the market today or in the process of being formulated.

we have seen, fuel oil is a residue that remains after crude oil is refined. The properties of fuel oil like viscosity, sludge content, presence of paraffinic and asphaltic particles and sulphur pose difficulties in the combustion of fuel oil. By treating the fuel with a suitable additive, many of these difficulties can be overcome and thermal energy can be extracted from the fuel to the fullest extent.

Before commencing with the trial use of Residuumsol: Fuel Oil Additive, it is necessary to establish the existing parameters related to your energy generation equipment. This can be achieved by determining the steam/fuel ratio in boiler installations. After using Residuumsol: Fuel Oil Additive for a period of sixty days, it will be observed that the steam/fuel ratio will be about 4-7% higher than the similar ratio without the use of the additive.

Yes, not all additives are alike. There are no standards to control what additives are made of. Some fuel additives are formulated for winter use to reduce fuel gelling and do little to protect your fuel system. Others may be mostly solvents to clean deposits from your injectors and do nothing to improve the lubricity of the fuel.

additive is an extraneous substance that is added to a substance in very small quantities to enhance the existing properties of the substance, to impart some desirable properties to the substance, or to supress certain properties.

Express-off a single feed, and whilst still at body temperature, pour this into a feeding bottle and add four drops of Colief®, shaking occasionally. The feed will be ready to use after approx half an hour.

Yes. If your fuel oil consumption is very low and if 5 litres can be sufficient for 60 days of use, then a trial using 5 litres of Residuumsol: Fuel Oil Additive will give you the desired results. However, if your consumption of fuel oil is much more, then 5 litres of the fuel oil additive would be suffice for only a few days. The benefits of using Residuumsol: Fuel Oil Additive are accumulative.

If you know your prescription, then try: Am I Suitable? for a quick check. The only way to know for sure and to find the best treatment for you is to come see us for a FREE consultation.

According to the Swedish Civil Aviation Administration, the spirit burner and fuel bottle are not considered as dangerous goods, provided that they are empty or filled with water. However, it is advisable to check-in the equipment and not carry it as hand luggage. Which burner should I choose? The spirit burner is recommended for use in everyday situations, such as short trips (a couple of days), especially during summer time when high power is not required.

One 30 mL bottle of MigraSpray contains approximately 20 doses (or 200 full sprays). If using daily for prevention, one bottle will last approximately 20 days.

The use of DurAlt? FC is recommended in each tank of gasoline or diesel fuel used in the vehicle's engine. Yes. DurAlt is completely soluble in all oil based additives, such as stabilizers, anti-gels and fuel conditioners. Yes. DurAlt? Fuel Conditioner has been beneficially used in conventional diesel fuel for many years. DurAlt Technology accelerates the combustion process and significantly reduces the smoke and particulate emissions from diesel engines.

You need to ask your supplier of the UV material you are trying to cure. Ask them if additional UV energy in the 390nm or 420nm range will provide any benefit.

Ans: Packages are pre measured for 1 Gal, 2 Gal and 5 Gallons of paint. Money saving bulk packaging is available also. You can figure on an average coverage rate of 250-300 sq. ft. per gallon for most house paints on smooth surfaces.