Well, probably. The MA 6S will not be damaged but you will obtain much less power output, and an extremely hot amplifier. To protect itself the MA 6S will current limit to the best of its ability. The MA 3 will current limit also and its fan must be set to high speed. Be forewarned that running below rated impedance voids the warranty and may damage the amplifier channels as well as power supply.

d[etailed logging; outputs to logfile headers and bodies of requests/responses. Good for text pages/files] The default behavior of curl-loader after HTTP response is to re-use the tcp-connection for the next request. If you are specifying -r command-line option, the TCP connection will be closed and re-opened for the next request. Whether it is appropriate for you to work with -r option or without, it depends on your server support of Keep-Alive and the purpose of your testing.

Yes, it is recommended by the generator manufacturer's as fuel can become "gummy" and moisture can condensate in the oil system when the generator is not used for a long period of time.

Generally, NO. Unless the manuals that came with your head unit specifically state that your head unit can be bridged, then do NOT attempt it - this could destroy the head unit's internal amplifier, and possibly void your warranty.

The unit of measurement when measuring the resistance of a thin film of a material using the four point probe technique. It is equal to the resistance between two electrodes on opposite sides of a theoretical square. The size of the square is unimportant.

The unit of measurement when measuring the bulk or volume resistivity of thick or homogeneous materials such as bare silicon wafers or silicon ingots, using the four point probe technique. RESISTIVITY is the inherent property of the material which gives it electrical resistance. It is sometimes called Specific Resistance. Sheet resistance is the resistance of a thin sheet of material which when multiplied by the thickness (in cm) gives the value of resistivity.

The Standard HarvesterTM can power any small to medium-sized 115-VAC/60 Hz electrical appliance or tool that draws up to a continuous 750 watts (6.5 amps) and a 1500 watt (13 amp) surge. The lower the electrical draw of the appliance, the longer the HarvesterTM will power it. The HarvesterTM will also power most 12V DC (automotive and RV type) appliances.

To specify an initrd file for domain 0 add an extra "module" line to your GRUB config, after your kernel-module line (e.g., module /boot/initrd-2.6-xen0.img). To use an initrd file for other domains, set the "ramdisk" variable in your domain configuration file (e.g., ramdisk = path/to/initrd-2.6-xenU.img).

Definitely not! The C400 does not put fingers at risk. Simply by easing the pull on the "tail" of the line, you can back off or drop the load if say a sudden swell catches you unawares. The C400 is fitted with a robust roller clutch brake to hold the load under all conditions. If a specific customer wants a winch which will run backwards, we can remove the brake to special order - but we do not recommend the practice.

The term Ohms-cm (Ohms centimeter) refers to the measurement of the "bulk" or "volume" resistivity of a semi-conductive material. Ohms-cm is used for measuring the conductivity of a three dimensional material such as a silicon ingot or a thick layer of a material. The term "Ohms-per-square" is used when measuring sheet resistance, i.e., the resistance value of a thin layer of a semi-conductive material.

It doesn’t matter. Ohms per square is the unit of an electrical measurement of surface resistivity across any given square area of a material. It is the measurement of the opposition to the movement of electrons across an area of a material's surface and normalized to a unit square. This measurement is intended to be a basic material parameter and not dependent on absolute area, length or thickness.

Impedance is the load connecting to the speaker socket on the amplifier or combo to give maximum power transference. This must match the stated impedance value on the amplifier or combo to ensure no damage can be caused to the speaker or amplifier.

I have an obsolete 34 ton Carrier, rooftop, multi-zone, direct expansion unit that I virtually can't get replacement parts for. I need a comparable change out, preferably not a Carrier. Can someone recommend a good substitute, brand, and model number? Also, I have the same scenario with a 20 ton Carrier. We recently bought another home and moved. This home has two dual fuel heat pumps that are zoned. Can you explain exactly how dual fuel heat pumps work.

Serial communication remains the most popular choice in home automation. While many newer technologies are starting to use USB and ethernet interfaces, most security systems, infrared controllers, A/V devices, irrigation systems and HVAC systems continue to use serial ports. USB to serial converters may also be used for systems that require more than 4 serial ports.

here are a few tests you can do. First, is the little LED light lit when the cable is plugged in to the cigarette lighter socket and your vehicle is operating? If not, the fuse in the cigarette lighter adapter may be faulty - change the fuse. If the first answer is yes, then is power available at the end of the cable that connects to your unit? Note, you will need a DC voltmeter to check this and the voltage will vary depending on the model of your unit.

Indispensable) unit tests can only test small parts of a system in isolation (steering-wheel OK, motor OK). GUI based testing exercises an application as a whole (steering-wheel and motor taken together don't guarantee roadworthiness).

Lots of factors can affect the run time. Make sure you are using a fresh battery that has been fully charged. Follow the maintenance and charge suggestions for the batteries. Very damp, cold or hot weather can also affect a batteries performance. Long Green times use more energy than short green times because the green LEDs take more power than red. Shorter full cycles also use more energy because the radio is used more and the yellow takes the most power.

Yes, all you need is an AC/DC Power Converter and you can power KoolerAire with any standard 110 volt outlet. Don't forget to check out our Portable Power Pack for cooling on the road!